Special tools

Tool for grinding and engraving Einhell. You're supposed to have it mandatory. One of the most useful tools in modeling. 220V - 50 Hz. Chuck: 0,5mm, 1,6mm, 2,4mm, 3,2mm... 189 different parts in the set.

Set of accessories for grinding and engraving. 106 parts (3mm).

Tool for grinding and engraving Dremel. One of the most useful tools in modeling.

The wood working lathe 8160 comes complete with a 3 jaw chuck, the jaws being reversable and a through hole allowing up to 10mm for long mast & spars. Adjustable head stock with fully floating centre along with brass bushings to centralize dowels from 2-12mm., which can also be used as a centre guide for drilling small dia. holes in the ends of spars etc. The Lathe is DC and can be used with our transformer giving various speeds 9v-12v-15v-18v although we find it best with 9 or 12v. Swing = 35mm . Between centre = 200mm . Code: 8160

The Transformer complements all D.C. tools and supplies 10amps at various voltages 9v-12v-15v-18v.

Form-a-strip lets you precision bend all types of wood strips usually used for planking. Made of unbreakable plastic. art. 7381 - Form-a-strip... art. 7381/04 - Spare blades

art. 7381/04 - Spare blades for 7381 - Form-a-strip.

Plank bender 8151. The plier type plank bender is one of the most important tools allowing you to bend varying thicknesses of strip wood, you can form tight or easy bend, and also put a twist in at the same time. The bender comes with various inserts and and allows the bending of strip metal as well. Code: 8151

The wheel type bender is really useful as an addition to the plier type this allows you to create an internal bend without marking, always make sure you wet the wood first for good result. Code 8150

Bends wooden planking strips easily and guarantees the correct curvature every time. Place your strip on the wooden form and heat it by moving the plank bender over it several times. Set includes handle with round metal head, plus a wooden pattern with different curves. Volts 220. art. 7205 - Electric plank bender (CE)

Makes quick and accurate mitre cuts in wooden or plastic strips and ensures that all cuts are identical. Fully adjustable from 45° to 90°. Sturdy plastic and metal construction, assembles in minutes. Kit includes also some spare blades. Base dimensions 15.5x10 cm. art. 7386 - Master Cut… art. 7386/02 - Spare blades

art. 7386/02 - Spare blades for 7386 - Master Cut.

Unbreakable modelling knife nylon handle with a brass collet. With the special front fitting it can mount any type of blade as well as a wide range of other modelling accessories. Practical and robust, it lets you work safely even on minute parts. A range of special accessories have been created for this knife, suitable for all types of model: two blade types, a saw, a four-jaw chuck and an extremely useful hand-held vice. One tool that's worth a thousand others. art. 7383 - Action Cutter

Modelling knife with unbreakable nylon handle and brass cullet. With the special front fitting it can mount any type of blade as well as a wide range of other modelling accessories. Practical and robust, it lets you work safely even on minute parts. A range of special accessories have been created for this knife, suitable for all types of model: two blade types, a saw, a four-jaw chuck and an extremely useful hand-held vice. One tool that's worth a thousand others. art. 7383/20 - Action kit knife plus accessories

Set includes 6 different blades and 1 handle for all light duty cutting tasks. art. 7490 - Multi Cutter Art Knife

An extremely useful tool for positioning even the tiniest nails. Insert the nail in the tube, bring the tool to the part to nail, press lightly and the nail is in. Suitable for fine brass nails art. 4136/10. art. 7384 – Nailer… art. 7384/02 - Spare pipe

art. 7384/02 - Spare pipe for art. 7384 – Nailer.

Code: 7399

Perfect for sawing, filing, drilling and trimming. Made of unbreakable material with special aluminium guide pins. Includes two clamps for fastening. Swivelling clamps (7396/01) are available separately to augment the possibilities of the new incredible Planet. art. 7396 - Planet work bench

Swivelling clamps (7396/01) are available separately to augment the possibilities of the new incredible Planet.

Versatile multi-purpose designed to hold even irregularly shaped objects. The part is held in position by four or more pins, inserted in the holes on each half of the vice. Simply change the position of the pins to adapt to the shape of the part. Package includes two clamps for fastening to the workbench. A special adapter lets you fasten the Gripper to the swivelling base of the Keel Klamper (7382) or the Roto Paint (7391). art. 7387 - Gripper vice… (separate, not in this price art. 7387/50 - Adapter for Gripper vice support)…

7387/50 - Adapter for Gripper vice support.

The Hull/Strip clamp is perfect for holding the keel while fitting formers etc, the clamp is adjustable & spring loaded with quick release cams, the top bed is metal making it ideal for splicing and edge shaping wood strips. Bed length = 270mm . Width = 30mm . Code 8155

Scraper with blades 8290. Ideal for model ships and variuos modelling. art. 8290 Scraper with blades

Scraper with blades 7100/02. Ideal for model ships and variuos modelling. art. 7100/02 Metal scraper… art. 7102/02 Set of 10 blades

art. 7102/02 Set of 10 blades for 7100/02 Metal scraper.

Kit contains 12 clamps and 14 brass plates. Attached photos show how to use these clamps: insert the photoetched part on a normal stationery double clip, bend the fins and fix it in place. Fasten the clip onto the frame and check how it keeps the planking strip in the correct position, allowing a better gluing or nailing. It can be used to keep in place different types of details, not only strips; you just need to check where to fix the clip.

This special swivelling clamp holds and supports the model while assembling, painting and finishing. The adjustable jaws slide on the aluminium bar and the swivel action lets you set the model in virtually any position. The bar also swivels and inclines in any direction, giving access to all parts of the model. The metal base can be fastened to the bench using the two clamps provided, or permanently fasted with four screws Bar length 40 cm. Fastening clamps included. art. 7382 - Keel Klamper

art. 7382/05 – Spare clamp for 7382 – Keel Klamper.

Fast Clamp is a special new clamp set for gluing plastic, wood, resin or metal kits. Quick and easy to use, the clamps have soft rubber linings to protect even the most delicate parts. Package includes 3 Fast Clamp clamps in two different lengths, brass bars and rubber linings. Code: 7389

These ideal tools ensure perfect rigging on all ship models and help while soldering. Special handle for a firm grip. Length 21 cm. art. 7375/22 – Beak

These ideal tools ensure perfect rigging on all ship models and help while soldering. Special handle for a firm grip. Length 21 cm. art. 7375/23 – Hook

Loom-a-line is a handy rigging jig for naval models of all shapes and sizes. With this rigging will always be perfectly taught. art. 7380 - Loom-a-Line

Code: 7400

art. 7510 Blitz saw - Length 130 mm 1 tooth spacing. Tempered steel, for wood. (12 pieces). Available in the following numbers: 00-0-1-2-3-4-5-6-7-9-11

art. 7520 Blitz saw - Length 130 mm 2 teeth spacing. Tempered steel, for wood and plastic. (12 pieces). Available in the following numbers: 00-0-1-2-3-4-5-6-7

Steel tube frame with unbreakable material handle. art. art. 7060/40 length 40 cm

Steel tube frame with unbreakable material handle. art. art. 7060/50 length 50 cm

Light and very manageable, these saws are suitable for precision cuts even on small and intricate shapes. art. 7070/01 Cut depth 9 cm. Blade length 12 cm

Excellent quality files and rasps for wood, metal and plastic. Length 14 cm. Available in following shapes : flat - taper flat – square _ round - halfround - three square… art. 7306 - Needle files

Excellent quality files and rasps for wood, metal and plastic. Length 14 cm. Available in following shapes : flat - taper flat – square _ round - halfround - three square… art. 7312 - Needle rasps

Perfect for finishing your models, the Contour Sander is designed to reach even the most inaccessible places. It comes with a handle, two different shaped feet, a cursor and two abrasive belts. The adjustable feet adapt to the correct working angle. Once the abrasive next to the feet is worn, the belt can be easily turned around to consume all the abrasive._ Length : 14-16 cm_ art. 7393 - Contour Sander_ art. 7394/18 - Abrasive belt grade 180_ art. 7394/24 - Abrasive belt grade 240_ art. 7394/32 - Abrasive belt grade 320_

Abrasive belt for art. 7393 - Contour Sander_ art. 7394/18 - Abrasive belt grade 180_ art. 7394/24 - Abrasive belt grade 240_ art. 7394/32 - Abrasive belt grade 320_

Stainless steel modelling tweezers in different shapes. art. 7371/10 - Bent nose

Stainless steel modelling tweezers in different shapes. art. 7371/12 - Straight thin nose

Stainless steel tweezers with heat resistant fibre grip. art. 7371/17 - Cross lock - bent nose

Stainless steel tweezers with heat resistant fibre grip. art. 7371/18 - Cross lock - straight nose

Stainless steel tweezers with heat resistant fibre grip. art. 7371/19 - Straight - thin nose

Action is a useful pin vice and a sturdy handle for blades, reamers, files and carving tools. The special handle connection fits nearly all types of accessories. The set includes handle with pin vice and 4 collets._ art. 7383/30 - Action Pin vice

Twist bits - In special steel. Indispensable for high precision work. Shaft diameter 2.30 mm. Available in the following diameters: mm. 0.5 - 0.6 - 0.7 - 0.8 - 0.9. art. 2040/00 - Helical bits