English Hrvatski Italian
We deliver worldwide !
tel: +385 (0)21/544-412 | E-mail

BOATS FOR/WITH ELECTRIC MOTOR

 

ROMARIN_ Katja Sportboat Kit Item no.: ro1020

Including VAT
For EU Market
440.00 Kn
59.00 €
69.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Romarin Katja - a Radio-controlled model sports boat kit

Katja is our model of an elegant four-seater sports boat with inboard motor, and it has turned out to be hugely successful. The model essentially consists of seven plastic parts. The deck and cabin are moulded in one piece in clear plastic, which eliminates the complex task of cutting out and installing the glazing panels. The Katja can be operated free-running or with radio control. In its simplest form the rudder is set for a fixed radius of turn. Once equipped with a radio control system the Katja is remarkably manoeuvrable, and its power system gives it a very lively performance. We recommend the romarin by krick Katja as an ideal fun model for the beginner.
Set contents
• Hull, deck, cabin insert, seat backrest and instrument panel moulded in white and clear plastic
• Complete stern tube with coupling and three-bladed propeller
• Rudder system including tiller and control linkage
• Decal sheet, glazing panel masks
• All fittings, including cleats, ship‘s wheel, flag and horns
• Detailed building instructions and plan
Specification:
Length approx. 520 mm
Width approx 180 mm
Total displacement approx. 1100 g
RC-Funktionen
Rudder, Motor control

Essential accessories
Item number
--- Radio control min. 2 channel
79050 Servo for the rudder 1x
67051 Quicrun WP1060 ESC 1x
42235 MAX Speed 400 1x
42128 Suppressor set 1x
67537 Cable red/black 1,5 mm² 2m 1x
67521 Motor connectors set 1x
667218 Racing Pack 7,2V/2000mAh 1x
79516 Charger Triple 1x

Replacement parts
Item number
ro1470 Propeller 30mmR 1x
ro1479 Boat Rudder+T.Arm 32X25X20 1x
ro1398 Fog Horn 17 mm 2Pcs 1x
ro1340 Cleat 15 mm Small 10Pcs 1x
ro1351 Flag Pole 2Pcs 1x
ro1359 Flag Germany 2Pcs 1x
ro1386 Coup.Sleeve 5X1,2X50 10Pcs 1x

BILLING BOATS_ Phantom Sportboot 1:15 RC-Baukasten Item no.: BB0710

Including VAT
For EU Market
1013.00 Kn
136.00 €
158.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

(Leer)

ROMARIN_ Sea Jet Evolution Kit Item no.: ro1266

Including VAT
For EU Market
1110.00 Kn
149.00 €
173.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Romarin Racy water sportsman with brushless electric drive

After many successful years, the time is ripe for a successor to the Romarin by Krick Sea-Jet – the Evolution.

The new Sea-Jet has been both optically and technically overhauled and re-designed. Learning from the modern competition Race-Jets, the optical appearance is significantly racier than its predecessor. To improve its roll stability, the hull has been made wider and lower.

To give the Evolution the power it deserves, we have equipped the Evolution with twin brushless drives. So that the power can be translated into thrust, the props are directly mounted to the motors, therefore no gear boxes or drive-shafts to sap the power. A centrally mounted rudder and optimised hull shape guarantee high manoevrability.

With these attributes, the new Romarin Sea-Jet is best prepared to take part in the Evolution class of the Sea-Jet Cup.

Set contents
• Hull, deck and seat in vacuum formed ABS-plasticf
• Rubber section rubbing strip
• CNC-routed ABS-plastic parts for drive and RC-installation
• Multi-piece driver figure in plastic
• Steering wheel and mirror in injection moulded plastic
• Drive shafts Ø 4 mm with stuffing tubes (2x)
• Propellers Ø 33 mm (left and right hand rotations)
• Dagger board and mounting
• Hardware/small parts for assembly
• Multi coloured decals
• Multi-lingual instructions
• Boat-stands

Accessories
Item number
ro1268 Brushless Drive Set with Brushless-Electric motors ROXXY® Inrunner 28-4507 (2x), Navy direct couplings (2x), Cable and Plugs or
ro1268 Standard Drive set with MAX Speed 500 brushed electric motors (2x), Navy direct couplings (2x), Cable and Plugs

Specification:
Drive type Electric motor
Length approx. 685 mm
Width approx 240 mm
Height approx. 370 mm
Total displacement approx. 2100 g

RC functions
Rudder, Motor control

Essential accessories
Item number
--- Radio control min. 2 channel
79050 Servo for the rudder 1x
67072 Seaking 60 BL-Control 2x or
67052 Quicrun WP 860 ESC for brushed motor
Racing Pack, 8,4V NiMH or 2S Lipo battery

For more details see under "Documents"

Replacement parts
Item number
ro1497 Surface-drive propeller 1x
ro1498 Surface Screw 2-Bl.L D33 1x
ro1742 Fin Sea-Jet Evolution 1x
ro1748 Navy-Direct-Coupling Extended Ø4/4x25 1x
ro1743 Tiller-bar Sea-Jet Evolution 1x
ro1744 Mirror Sea-Jet Evolution 1x
ro10661000 Driver Set 1x
ro4919 ROXXY® Bl Inrunner 2845/07 1x

ROMARIN_ Najade Motor Yacht Kit Item no.: ro1160

Including VAT
For EU Market
1706.00 Kn
229.00 €
266.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Semi-scale model of a luxury motor yacht to 1:15 scale

Just like the full-size prototype the Najade features a large, roomy cabin, an imposing flying bridge and a lusty power system to ensure an impressive top speed. The propulsion system is based on a 700-size electric motor driving the propeller direct via the propeller shaft. The power system are not included in the kit. Construction of this superb model is hastened by many pre-fabricated parts, including the glazing which is moulded in clear brown-tinted material. The fittings set is supplied as standard, and contains all the detail items required to give the Najade a perfect scale appearance. Fittings set set included
Set contents
• Vacuum-moulded plastic hull
• Vacuum-moulded plastic deck and superstructure components
• Clear vacuum-moulded glazing sections
• Die-cut plastic parts for RC installation
• Stern tube with shaft and propeller
• Accessories for motor and RC installation
• Rudder system
• Complete fittings set
• Decal sheet
• Illustrated building instructions
• Boatstand

Colors and glue not included.
Specification:
Length approx. 960 mm
Width approx 300 mm
Height approx. 370 mm
Total displacement approx. 3600 g
Scale 1:15
RC functions
Rudder, Motor control
Essential accessories
Item numbers
--- Remote Control min. 2 channel
79050 Servo for rudder

For Standard Power Drive
Item number
42260 Elektric motor Max Speed 800
42128 Suppressor Filter Set
42123 Water cooling coil
70917 Tube for water cooling
67052 ESC WP860 Dual
ro1446 Power Heavy Duty Clutch 5/4 mm
For Brushless Power drive
ro4786 ROXXY® BL Inrunner 3656/06
67072 ESC Seaking 60AWP1060
42122 Water cooling coil
70917 Tube for Watercooling
ro1446 Power Heavy Duty Clutch 5/4 mm

Replacement parts
ro1446 Power Heavy Duty Clutch 1x
ro1456 Surface Screw D35 1x
ro1479 Boat Rudder+T.Arm 32X25X20 1x
ro1351 Flag Pole 2Pcs 1x
ro1338 Yacht Bollard 22X8mm 6Pcs 1x
ro1302 Radar Head 1x
ro1364 Flag Italy 2Pcs 1x
ro4786 ROXXY® BL Inrunner 3656/06 1x

A complete list of recommended accessories is included in the technical documentation supplied with the model or under the point "Documents" on this page.

KRICK_ Lisa M. Construction Kit Item no.: 20320

Including VAT
For EU Market
887.00 Kn
119.00 €
138.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

The Lisa M. is a typical motor yacht, as it can be found in all ports and marinas worldwide. Straightforward classic design with great elegance and great sailing comfort at comparatively high cruising speeds characterise this type of yacht. And these properties can also be transferred to the model on a scale of 1:25.

All parts of the body are laser cut from plywood. This construction method is the ideal method to teach the beginner in this hobby in a simple way basic knowledge and to lead him guaranteed with a chic model to success. The hull is deep-drawn from ABS and thus ensures absolutely simple installation of the drive unit with the best possible watertightness and safety while driving. The deck is made of one piece of plywood and contains a large opening for easy access to the interior. The complete assembly can be removed in one piece. All fitting parts, made of plastic or metal, are included in the kit.

The dinghy is available as an additional kit. But even without a dinghy at the stern, this model looks great. A powerful 480 class motor with interference suppression capacitors, cables and flexible coupling is included as drive unit. Detailed instructions with many step-by-step illustrations and a 1:1 construction plan are also included.

Adhesives, paints and tools that are not included in the kit are required for completion.

Recommended accessories:
Kit dinghy 1:25

Necessary accessories:
Remote control min. 2 channels
cruise control
Rudder Servo
Battery pack 7.2 V
charger
For more details click on the tab "More Info".

Technical Specifications
Scale 1:25
Length 690 mm
Width 205 mm
Height 310 mm

BILLING BOATS_ Fairmount Alpine 1:75 RC-Baukasten Item no.: BB0506

Including VAT
For EU Market
2749.00 Kn
369.00 €
428.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Fairmount Alpine

Die Reederei Fairmount Marine ist ein niederländisches Unternehmen, das insbesondere in den Bereichen Hochseeverschleppungen und Schwerguttransport tätig ist. Fairmount Marine wurde 1980 gegründet. 2007 wurde Fairmount Marine von dem in Paris ansässigen Unternehmen Louis Dreyfus Armateurs übernommen. Das Unternehmen ist Mitglied der International Salvage Union.

Schiffsflotte: Fairmount Marine betreibt sechs Hochseeschlepper und ein Halbtaucherschiff. Fünf der Hochseeschlepper, welche die Fairmount-Klasse bilden, werden für Hochseeverschleppungen und als Ankerzieh- und Bergungsschlepper eingesetzt. Sie verfügen über einen Pfahlzug von 205 Tonnen. Der sechste Schlepper dient als Offshore-Versorger. Auch halb tauchenden Lastkähne darunter der Gavea LIFTER mit 50.000 Tonnen Tragfähigkeit sowie Mehrzweck-Offshore-Versorgungsschiffe.

Baukasten: Dieser holländische Superschlepper kann sowohl als Standmodell oder ferngesteuertes Modell gebaut werden. Der Baukasten ist komplett aus lasergestrahlten Holzteilen hergestellt. Die Rumpfkonstruktion basiert auf Spanten und lasergeschnittenen Seitenteilen, die den Bau vergleichsweise einfach gestalten. Alle Aufbauteile sind aus feinstem Sperrholz lasergeschnitten. Ebenso sind alle Beschlagteile sowie Wellen Stevenrohre und Ruder enthalten.

Das Modell wird von zwei Elektromotoren angetrieben. Auch der Einbau eines Bugstrahlruders ist vorgesehen.

Technische Daten:
Maßstab 1:75
Länge 1000 mm
Breite 240 mm
Höhe: 450 mm

Wichtiges Zubehör
Art.-Nr.
42256 MAX Power 700 Elektromotor 2 Stück
42128 Universal Entstörsatz für Bürstenmotoren 2 Stück
ro1446 Hochlastkupplung 4/5 mm 2 Stück
67052 Fahrtregler Quicrun WP860 Dual Brushed 1 Stück
667255 Bleiakku 6V / 7Ah 2 Stück
79054 Servo WP Digital 4503C BB spritzwassergeschützt

Kabel, Stecker Verbindung Akkus/Motoren/Fahrtregler
Art.-Nr.
67538 Zwillingslitze 2x2,5mm² 2m 1 Pack
ro4039 Stecker/Buchse Faston 6,3 mm isoliert 1 Pack
67518 T-Plug Stecker+Buchse (5 Satz) 1 Pack
67521 Motoranschluss Stecker+Buchse rund (10 Paar) 1 Pack

Optionales Zubehör
Art.-Nr.
rb108-04 Querstrahlruder 22/25 x 154 mm 1 Stück
67052 Fahrtregler Quicrun WP860 Dual Brushed 1 Stück
65105 Soundmodul groß Benzin/Diesel-Motor mit Horn 1 Stück

Zusätzlich werden noch Sender, Empfänger, Klebstoffe, Farben und weiteres Zubehör benötigt.

ROMARIN_ Düsseldorf Fire-Fighting Boat Kit Item no.: ro1100

Including VAT
For EU Market
1855.00 Kn
249.00 €
289.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Scale model of the „Düsseldorf“ fire-fighting boat to 1:25 scale

The Düsseldorf fire-fighting boat was developed and built by the Rheinwerft company of Mainz-Mombach, and it is operated in the Ruhr industrial region of Germany. The vessel is designed specifically to cope with disaster situations, such as a ship on fire, a major oil leak or a harbour system in danger of explosion, and its fire monitors, operating at a pressure of 10.5 bar, can hurl water or foam 45 m high and a distance of up to 95 m. The two V-12 engines produce a total of 930 kW (1260 BHP), giving the boat a maximum speed of around 37 km/hr.

The Romarin kit of the „Düsseldorf“ fire-fighting boat is large and capacious enough to accommodate all the equipment required to emulate the wide-ranging facilities of the full-size vessel. Optional working systems include the fire monitors, crane, anchor winch, radar, searchlights, blue light, horn and siren, and also the sound of the diesel engines. The plastic hull is moulded in thick-walled material, and it offers plenty of space for the numerous mechanical and electronic parts required for the auxiliary working systems. The model is propelled by two proven MAX Gear power systems, giving it an impressive turn of speed. Four large rudders guarantee extreme manoeuvring capability both forwards and astern. The fire monitors can be swivelled horizontally and vertically from the transmitter, and with the recommended electric geared pump they can fire a jet of water a distance of 6 - 8 m. If a working boat crane is fitted, the vacuum-moulded rowing board can be raised, swung outboard and lowered to the water in true scale style.

Set contents
• Vacuum-moulded plastic hull, superstructure and other parts
• Die-cut plastic decks and small parts
• Die-cut plywood parts, e.g. motor bulkhead and pump plate
• Three working fire monitors
• Articulated boat crane
• Two propellers, four rudder sets, all linkage hardware for RC installation
• Painting masks
• Decal sheet
• Detailed building instructions and plan

Specification:
Length approx. 1160 mm
Width approx 250 mm
Height approx. 500 mm
Total displacement approx. 9000 g
RC functions
Rudder, Motor control, Lighting systems, Auxiliary working systems, Ancor winsch function Essential accessories
--- Remote Control min. 2 channel
ro1101 Fitting Set Düsseldorf
ro1103 Special funktion Set Düsseldorf
79059 Servo for rudder
67052 ESC WP860
42275 MAX Gear 2,5:1 Electric Motor 2x
42128 Suppressor Filter Set 2x
rb106-65 Cuppling Set 2x

Replacement parts
Item number
ro1471 3-Blade Propeller 50mm,Rh 1x
ro1472 3-Blade Propeller 50mm,Lh 1x
ro1481 Boat Rudder+T.Arm 50X36X28 1x
A complete list of recommended accessories is included in the technical documentation supplied with the model or under the point "Documents" on this page

KRICK_ Felix Harbour Launch Construction Kit Item no.: 20300

Including VAT
For EU Market
708.00 Kn
95.00 €
110.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

This model is a faithful replica of a Hamburg harbour launch. Used partly as a pure work and transport vehicle and partly as a tourist boat, almost everyone knows these pretty little launches, which are indispensable in the Port of Hamburg.

Felix was rebuilt according to original shipyard plans of a Hamburg harbour barge. The aim of this design was to develop a construction kit that combines the typical appearance with the simplest possible construction. This has resulted in a starter kit that has lost none of its original fidelity. This makes this kit an interesting piece even for experienced model builders, not least because of its popular 1:25 scale, which still leaves a lot of possibilities open for fine details.

The hull is deep-drawn from high-quality ABS plastic with integrally formed keel, so that the installation of stern tube and rudder offers no difficulties. A bead for the bottom plate and the waterline is also already marked on the fuselage, so that the beginner has no construction problems.
All deck and superstructure parts are carefully and accurately cut out with a laser beam and the simple plug-in system makes the construction extremely simple. Furthermore, various motor bulkheads for different motor variants are included and the motor can be easily removed together with the mounting bracket at a later date.
An electric motor with articulated coupling is already included as standard, together with a stern tube shaft and steering gear.
All illustrated fitting parts are already prefabricated from wood or plastic included in the kit. The detailed building instructions and a building plan are specially designed for beginners.

For the equipment with a radio remote control and for driving you need the following equipment:
Radio remote control min. 2 channels and one servo
Speed controller 20 A, forward/reverse with BEC receiver power supply
drive battery 7,2V/2 Ah or lead battery 6V/1,1 Ah
Charger 220V or 12V operation

To build the model you need the following adhesives, fillers and paints:
Wood glue UHU coll waterproof 210g
Two-component adhesive UHU-Plus acrylit 30g
superglue low viscosity two-component adhesive 5min-Epoxy 100g
Super-lightweight filler
Pore filler
Primer (suitable for the colour varnishes used)
clear varnish (wheelhouse walls, benches, doors, mast and gaff)
Colour spray red, black, brown, green and white
Brush varnish red and black (fittings)

The following tool is the basic equipment for building the "Felix":
Handicraft knife with snap-off blades
hand drill
sandpaper arrows, grain approx. 300
sanding block
round file approx. Ø 6 mm
drills Ø 1 mm, 2 mm, 3 mm, 4 mm, 6,5 mm
sandpaper grain approx. 200 and 300
Wet sandpaper 400 and 600 for pore filler, primer and varnish

PVC adhesive tape or paper adhesive tape is still required for masking during painting. No crepe tape! A 3 mm wide adhesive tape is used to cover the waterline.

Technical data:
Scale: 1:25
Length: 634 mm
Width: 148 mm
Height: 270 mm

DUMAS BOATS_ Rusty the Shrimp Boat Kit Item no.: ds1271

Including VAT
For EU Market
2197.00 Kn
295.00 €
343.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

We have put the finishing touches on a brand new 1/24th scale model of Coastal Waterways Shrimp boat appropriately named Rusty. Rusty the Shrimp Boat is a stereotypical Coastal Shrimper. Equipped with outriggers, trawl boards, nets, cleaning benches and coolers, good old Rusty has everything you need for a successful day's catch.

This 36" model features balsa planking over laser cut poplar plywood frames. The cabin and pilot house are constructed from die-cut expanded pvc with laser cut plywood frames. The kit includes all of the material for the scaffolding, nets, outriggers and so much more, A massive instruction booklet and corresponding figure set walks you step-by-step through construction. And for an added bonus this is one of the best running boats in the line. If you have been looking for something out of the ordinary look no further than Rusty the Shrimp Boat. Colors and Glue are not included.

Technical Data:
Length: 914 mm / 36 inch
Beam: 228 mm / 9 inch
Scale: 1:24

Additional parts required to power and radio control the model:
- MAX Power 600
- Electronic Speed Control
-7.2v Battery Pack
-Two Channel Radio

Running Hardware not included:
Propshaft 300 mm with Tube
Coupling
Three Blade Brass Propeller 40 mm dia.


Please note some of the running hardware parts are called for early in the construction of the model.

We have put the finishing touches on a brand new 1/24th scale model of Coastal Waterways Shrimp boat appropriately named Rusty. Rusty the Shrimp Boat is a stereotypical Coastal Shrimper. Equipped with outriggers, trawl boards, nets, cleaning benches and coolers, good old Rusty has everything you need for a successful day's catch.

This 36" model features balsa planking over laser cut poplar plywood frames. The cabin and pilot house are constructed from die-cut expanded pvc with laser cut plywood frames. The kit includes all of the material for the scaffolding, nets, outriggers and so much more, A massive english instruction booklet and corresponding figure set walks you step-by-step through construction. And for an added bonus this is one of the best running boats in the line. If you have been looking for something out of the ordinary look no further than Rusty the Shrimp Boat.

Length: 914 mm / 36 inch
Beam: 228 mm / 9 inch
Scale: 1:24

Additional parts required to power and radio control the model:
MAX Power 600, Electronic Speed Control, 7.2v Battery Pack, Two Channel Radio

Running Hardware not included:
Propshaft 300 mm with Tube
Coupling
Three Blade Brass Propeller 40 mm dia.

Please note some of the running hardware parts are called for early in the construction of the model.

Order no. ds1271
Item no. 1271

DUMAS BOATS_ SC-1 Class Sub-Chaser Item no.: ds1259

Including VAT
For EU Market
1751.00 Kn
235.00 €
273.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

SC-1 Class Sub-Chaser

KRICK_ Nordstrand Construction Kit Item no.: 21430

Including VAT
For EU Market
1229.00 Kn
165.00 €
192.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Nordstrand is a modern trawler yacht, the originals of which come from a Dutch shipyard. With its wide displacement hull it has a nice sailing pattern on the water, which always makes an impression and yet the northern beach is not slow and very manoeuvrable. That Model in scale 1:16 has adopted the good driving characteristics of the original.

The components of Nordstrand are mainly made of the best quality deep-drawn ABS plastic, which makes the assembly simple and pleasing. High accuracy of fit makes this model a success even for beginners. Nevertheless, the large fuselage offers many design options for additional functions. A Max Power 600 can be used to drive the Nordstrand. In connection with an electronic speed controller, all driving manoeuvres can be performed with the Nordstrand as with the original.

The kit contains all deep-drawn ABS parts, stamped ABS and plywood parts as well as all fittings for the many details shown, such as window frames, fenders and life jackets. A detailed building plan 1:1 and a precise building instruction with many tips and hints for beginners are also included.

Technical data:
Scale: 1:16
Length: 850 mm
Width: 315 mm

For the equipment with a radio remote control and for driving you need at least the following equipment:
Dual-channel radio remote control with one servo
Speed controller min. 20 A, forward/reverse
Max Power 600 electric motor
drive battery 6V - 8,4 V from 2 Ah
Suitable charger 220V or 12V operation
Paints and adhesives
These accessories are available in every model shop.

KRICK_ Müritz Cabin Boat Construction Kit Item no.: 20350

Including VAT
For EU Market
887.00 Kn
119.00 €
138.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

The Müritz is a replica of a model kit and blueprint that was very popular in the former GDR. The pleasing form and construction originally came from Karl Schulze. The frame construction with large fuselage sides allows the model to be built quickly and easily.

This kit was designed for remote control and electric motors used today and fully reflects the charm of the historic model.

The wooden construction kit contains all plywood parts already cut out with laser beam, shaft and stern tube as well as all material for rudders and joints. A detailed assembly instruction explains the assembly of the precisely fitting laser parts, so that the assembly should present no problems even for a beginner with experience in handling wood.

For the equipment with a radio remote control and for driving you need at least the following equipment:
Dual-channel radio remote control with one servo
Speed controller min. 20 A, forward/reverse e.g. speed controller Quicrun WP1060 Brushed
Order no. 67051
Max Power 600 electric motor Order no. 42124
Interference suppression kit for electric motors order no. 42128
Shaft coupling 3.18 mm / 4 mm Order no. 63703
Driving battery 6V - 8.4 V from 2 Ah for example 7.2V 2000 mAh Order no. 667218
Suitable charger 220V or 12V operation e.g. charger X-680AC 12/230V 80W Order no. hp011391
Cables, connectors, paints and adhesives

Technical data:
Length 650 mm
Width 220 mm
Height 250 mm

BILLING BOATS_ Kadett Motorboot RC-Baukasten Item no.: BB0566

Including VAT
For EU Market
887.00 Kn
119.00 €
138.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Kadett

Nachbildung eines typischen Motorbootes aus den 60er Jahren. Dieses RC-Modell mit Kunststoffrumpf eignet sich gut als Einsteigermodell für Modellbauer die mehr auf Detailtreue achten, als bei den herkömmlichen Einsteiger-Schiffsmodelbausätzen. Allerdings erhöht sich der Schwierigkeitsgrad etwas. .

Technische Daten:
Länge: 540mm
Breite: 160mm
Höhe: 250mm

Benötigte Farben
Artikel-Nr.
BCA001 Weiß 22 ml Billing Boats
BCA003 Esmerald grün 22 ml Billing Boats
BCA004 Orange 22 ml Billing Boats
BCA006 Rumpf rot 22 ml Billing Boats
BCA009 Bright rot 22 ml Billing Boats
BCA015 Silber 22 ml Billing Boats
BCA018 Mediterran blau 22 ml Billing Boats

BILLING BOATS_ White Star RC-Baukasten Item no.: BB0570

Including VAT
For EU Market
887.00 Kn
119.00 €
138.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

White Star

Ein Modell eines typisch amerikanischen Motorboots, das zur Thunfischerei, besonders in Florida verwendet wird. Ein Motorbootsmodell mit Kunststoffrumpf, das sich besonders an die Modellbauer wendet, die ein Boot zum ferngesteuerten Fahren wünschen.

Benötigte Farben
Artikel-Nr.
BCA009 Bright rot 22 ml Billing Boats
BCA011 Schwarz 22 ml Billing Boats
BCA012 Pale grau 22 ml Billing Boats
BCA014 Matt weiß 22 ml Billing Boats
BCA015 Silber 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA036 Mahagoni 22 ml Billing Boats

Technische Daten:
Maßstab: 1:50
Länge: 540mm
Breite: 160mm
Höhe: 300mm

MANTUA MODEL_ Mincio Baukasten Item no.: 800704

Including VAT
For EU Market
961.00 Kn
129.00 €
150.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Spantengerüst, das sehr einfach zusammengesteckt und verleimt wird. Dieses Gerüst wird doppelt mit Leisten beplankt.

Selbstverständlich kann das Modell mit einer Fernsteuerung ausgestattet werden. Ruder, Stevenrohr und Schiffswelle sowie alle Beschlagteile und eine ausführliche, farbig bebilderte Bauanleitung und der Elektromotor für 4,8V Betriebsspannung sind im Baukasten enthalten.

Technische Daten:
Maßstab 1:20
Länge 450 mm
Beplankung doppelt

AMATI_ Ital. Sportboot Typ Aquarama 1:10 Baukasten Item no.: 25035

Including VAT
For EU Market
3717.00 Kn
499.00 €
579.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

RIVA AQUARAMA

Dieser neue Amati Baukasten der Riva Aquarama wurde ganz neu konstruiert und bewusst auf den Modellbauer ausgerichtet, der dieses Modell auch auf dem Wasser betreiben möchte. Hierzu ist es besonders wichtig, das Modell leicht zu halten. Daher wird das Modell in klassischer Spantenbauweise aufgebaut, die durch moderne Lasertechnik einen schnellen und einfachen Bau ermöglicht. Die Halterungen für die Antriebsmotoren wurden hier bereits mit vorgesehen.

Durch diese besonders originalgetreue Bauart ergibt sich einer erheblich leichterer und sehr stabiler Rumpf als bei allen anderen Konstruktionsarten dieses Modells. Die Beschläge des Baukastens sind von bester Qualität und hochglänzender Oberfläche. Die Sitze und Polster liegen vorbereitet dem Baukasten bei, was den Zusammenbau des Modells besonders vereinfacht. Ein Bauplan sowie eine ausführliche Bauanleitung sind ebenfalls dem Baukasten beigefügt.

Zubehör:
Artikel-Nr.
25036 Motorisierungssatz Riva für den Betrieb als RC Modell
63220 Schiffsständer mit Grundplatte
Technische Daten:
Maßstab 1:10
Länge 850 mm
Breite 270 mm

Ersatzteile (Im Bausatz enthalten)
Artikel-Nr.
91284 Bauplan
63248 Metallbeschlagsatz komplett

AMATI_ Sexy Lady Sportboot GFK Rumpf+Zubehör Item no.: 25055

Including VAT
For EU Market
1483.00 Kn
199.00 €
231.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Sexy Lady Sportboot

Mit diesen Modell mit GFK Rumpf geht AMATI bewusst ganz andere Wege, als mit seinen klassischen Bausätzen. Diese hochwertig hergestellte Bausatz beinhalten lediglich den weißen GFK-Rumpf mit bereits aufgebrachtem und grundiertem Deck, die Sitzpolster und Beschläge, wie auf den Abbildungen zu sehen. Die Konstruktion ist für Außenbordantrieb vorgesehen, der vom Modellbauer selbst gewählt wird. Die Inneninstallation muss ebenfalls selbst vorgenommen werden. Dafür erhalt man ein interessantes Design vorbildähnlicher moderner Retrodesign-Boote zu einem attraktiven Preis.

Bei der Sexy Lady hat von seiner Deckanordnung her das klassischere Design. Der Fahrersitz ist vorne und hinten eine Liegeplattform. Die Rumpfkonstruktion mit schön abgesetzten Kufen auf der Unterseite, breitem Heck und extra Badeeinstiegen recht und links vom Außenborder.

Technische Daten
Maßstab 1:8
Länge 850 mm
Breite 300 mm
Gewicht GFK Rumpf ca. 2300 g

AMATI_ Grand Banks Motoryacht Item no.: 25034

Including VAT
For EU Market
3717.00 Kn
499.00 €
579.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

GRAND BANKS

Detailgetreue Reproduktion einer klassischen Grand Banks Motoryacht, deren ursprüngliches Design auf das Jahr 1967 zurückgeht. Die Konstruktion basierte ursprünglich auf einem Trawler-Rumpf, wie sie typisch in Nordamerika und auch in Neufundland waren, wo die Werft zuhause ist. Der Baukasten basiert auf einem GfK-Rumpf, lasergeschnittenen Decks und Aufbauten, vielen Beschlägen aus Metall geätzt und aus Messing. Das komplette Interieur kann nachgebaut werden. Das Modell kann natürlich motorisiert und mit einer Fernsteuerung ausgestattet werden. Hierzu ist der Aufbau komplett abnehmbar konzipiert.

Technische Daten:
Maßstab 1:20
Länge ca. 720 mm
Breite ca. 220 mm
Motoren 2

AMATI_ Bellezza Sportboot GFK Rumpf + Zubehör Item no.: 25056

Including VAT
For EU Market
1334.00 Kn
179.00 €
208.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Bellezza Sportboot

Mit diesen Modell mit GFK Rumpf geht AMATI bewusst ganz andere Wege, als mit seinen klassischen Bausätzen. Diese hochwertig hergestellte Bausatz beinhaltet lediglich den weißen GFK-Rumpf mit bereits aufgebrachtem und grundiertem Deck, die Sitzpolster und Beschläge, wie auf den Abbildungen zu sehen. Die Konstruktion ist für Außenbordantrieb vorgesehen, der vom Modellbauer selbst gewählt wird. Die Inneninstallation muss ebenfalls selbst vorgenommen werden. Dafür erhalt man ein interessantes Design vorbildähnlicher moderner Retrodesign-Boote zu einem attraktiven Preis.

Bei der Bellezza sitzt der Fahrer hinten und davor ist eine weitere Sitzreihe für Passagiere, wie bei moderneren Konstruktionen von Speedbooten häufiger zu sehen. Dennoch ist das Design eher klassisch gehalten mit Holzdeck. Die Rumpfkonstruktion mit schön abgesetzten Kufen auf der Unterseite, breitem Heck und extra Badeeinstiegen recht und links vom Außenborder.

Technische Daten
Maßstab 1:8
Länge 850 mm
Breite 300 mm
Gewicht GFK Rumpf ca. 2300 g

DUMAS BOATS_ 1930 24' Chris-Craft Runabout Kit Item no.: ds1230

Including VAT
For EU Market
2898.00 Kn
389.00 €
451.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

1930 24' Chris-Craft Runabout Kit

A beauty from yesteryear! Create a legendary masterpiece from our all wood kit of the 1930 24 ft. Chris-Craft Mahogany Runabout. The construction of this kit features a double planked hull with birch plywood on the inside with mahogany strip planking on the outside. A complete set of fittings is also included. Running hardware including shaft, stuffing box, rudder, strut, and a bronze three bladed propeller is also in the kit. They looked great on the lake in the 1930s, and they can look great on the lake again today.

Length: 36 inches
Beam: 10 inches
Scale: 1/8th
Running Hardware: Included in kit

*Additional parts required for R/C:

Power: High Speed Electric Motor
Speed Control: Electronic Speed Control
Battery: 7.2v NiMH Flatpack
Charger: NiMH Battery Charger
Radio Control: 2 Channel Radio Control w/ servo.

NORDIC CLASS BOATS_ Solö Ruff Daycruiser 1:10 Bausatz Item no.: 24505

Including VAT
For EU Market
1557.00 Kn
209.00 €
242.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

NEUAUFLAGE

Solö Ruff Daycruiser

Das Motorboot Solö Ruff ist ein klassischer Daycruiser wie er von der schwedischen Firma Royal Storebro in den 50er und 60er Jahren erbaut wurde. Das Boot war damals sehr beliebt und wurde deshalb bis 1965 in mehreren Varianten gebaut. Es wurde vor allem in Europa, aber auch in Nord- und Südamerika verkauft.

Noch heute ist dieser Schiffstyp sehr beliebt und daher auf dem klassischen Bootsmarkt gesucht.

Der Bausatz wird komplett mit lasergeschnittenen Holzteilen, dem Beschlagsatz und den für den Bau des Modells erforderlichen Zeichnungen geliefert. Die Klinkerbeplankung ist mit passgenauen Laserplanken bereits vorbereitet. Mit relativ geringen Umbauten kann das Modell von Erfahrenen zum RC-Modell ausgebaut werden, dies ist aber noch nicht vollständig vorgesehen.

Technische Daten:
Maßstab 1:10
Länge 720 mm
Höhe 220 mm
Breite 200 mm

DUMAS BOATS_ Chris-Craft Cobra Kit Item no.: ds1232

Including VAT
For EU Market
2451.00 Kn
329.00 €
382.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Chris-Craft Cobra Kit

This fun little speedster is from the era of big fins and wings. The sporty Cobra model is an all-wood kit featuring a double planked birch plywood and mahogany veneer hull. The two-tone deck is achieved with the use of basswood and mahogany veneer. The hatch and fin section is preformed ABS plastic. Chrome fittings, complete running hardware including a three-blade brass prop, decals and flag complete this blunt nose beauty of the 50s.

Length: 27 inches
Beam: 9-3/4 inches
Scale: 1/8th
Running Hardware: Included in kit

*Additional parts required for R/C: (sold separately)

Power: High Speed Electric Motor
Speed Control: Electronic Speed Control
Battery: 7.2v NiMH Flatpack
Charger: NiMH Battery Charger
Radio Control: 2 Channel Radio Control w/ servo.

CALDERCRAFT_ Sea Commander Baukasten Item no.: 27025

Including VAT
For EU Market
1631.00 Kn
219.00 €
254.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

SEA COMMANDER Bausatz

ENGLISCHES YACHTMODELL

Die Sea Commander wurde als Materialsatz und Bauplan in den 1960 Jahren in England hergestellt. Sie stellt ein sehr klassisches Modell aus dieser Zeit dar. Dieser CNC-Fräsbausatz ist eine exakte Nachbildung dieses Modells und gibt auf wunderbare Weise den Stil der damaligen Zeit wieder.
Am Material Holz wurde nichts verändert, nur sind die Teile bereits CNC-genau ausgeschnitten und die Passgenauigkeit so verbessert, dass der Bau dieses Modells eine Freude ist. Auf dem Wasser ist die Sea Commander eine besondere Schau, insbesondere für Nostalgie-Freunde. Dieser Baukasten von Calder Craft enthält alle zum Bau notwendigen Holzteile, Fenster mit Rahmen, herausnehmbare Radioplatte, Welle, Stevenrohr in Edelstahl sowie einen Motor 700 mit Kupplung und einen passenden 2-Blatt-Propeller. Bauplan und Anleitung sind selbstverständlich. Im Beschlagsatz befinden sich alle äußeren Beschlagteile, wie funktionierende Positionslichter, Anker, Steuerrad, Poller usw.

Weiteres Zubehör
27026 Beschlagsatz Sea Commander mit Fittings

Technische Daten
Länge 866 mm
Breite 268 mm

DUMAS BOATS_ Chris-Craft Barrel Back 1:8 Kit R/C Remote Kit Item no.: ds1234

Including VAT
For EU Market
2973.00 Kn
399.00 €
463.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Chris-Craft Barrel Back 1:8 Kit R/C Remote Kit from Dumas

In 1940 Chris-Craft introduced a new hull style called the torpedo deck or barrel back. Fifty plus years later it is among the most highly coveted of the famed Chris-Crafts, and thanks to the model masters at Dumas, you can own one in miniature. In keeping with the Dumas tradition of Chris-Craft kits, this model features a doubled planked PVC and mahogany veneer hull, preformed plastic seats, chrome fittings, and complete set of running hardware. Color decals and flag and burgee helps set off the model.

Length: 28-1/2 inches
Beam: 9-1/2 inches
Scale: 1/8th
Running Hardware: Included in kit

DUMAS BOATS_ 1947 Chris-Craft Utility Boat Kit Item no.: ds1240

Including VAT
For EU Market
2228.00 Kn
299.00 €
347.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

1947 Chris-Craft Utility Boat Kit

This sporty little speedster from the late 40s is an all-wood kit with a double-planked hull similar to our other Chris-Craft kits. Included in the kit are chrome-plated fittings, vacuum-formed seats, running hardware, and a complete set of flags and decals. The Utility Boat would be a great start into the Chris-Craft line. If you have built the other kits, this will make a nice addition to your fleet.

Length: 24 inches
Beam: 9 inches
Scale: 1/8th
Running Hardware: Included in kit

*Additional parts required for R/C:

Power: High Speed Electric Motor
Speed Control: Electronic Speed Control
Battery: 7.2V NiMH Flatpack
Charger: NiMH Battery Charger
Radio Control: 2 Channel Radio Control w/ ser

MANTUA MODEL_ Bruma Motor-Segelyacht Baukasten Item no.: 800736

Including VAT
For EU Market
1601.00 Kn
215.00 €
249.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

BRUMA Motor-Segelyacht

Schöne Nachbildung einer Motor-Segelyacht, die aus einem alten Ozeanfischer umgebaut wurde. Dieses Modell kann sowohl als Standmodell oder mit dem zugehörigen Motorisierungssatz als ferngesteuertes Modell gebaut werden. Durch seine Kiel und Spantenbauweise erhält man einen guten Einblick in die traditionelle Bauweise von Modellschiffen mit Holzrumpf.

Der Baukasten enthält alle Holzteile mit Laserstrahl ausgeschnitten, sämtliche Beschlagteile sowie Wellen und Stevenrohre, allerdings keine Motorteile.

Zubehör (nicht im Baukasten enthalten):
800600 Elektromotor und Zubehör zur Motorisierung
843907 Namensschild aus Holz

Technische Daten:
Maßstab: 1:43
Länge: 860 mm

DUMAS BOATS_ Chris Craft Triple Cockpit Barrel Back 1938 R/C Kit Item no.: ds1241

Including VAT
For EU Market
3569.00 Kn
479.00 €
556.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

1938 Chris-Craft Triple Cockpit Barrel Back Kit from DUMAS

This sleek beauty is a triple cockpit version of our popular Chris-Craft Barrel Back kit. The Triple Cockpit Barrel Back is 40-1/2 in. long with a beam of 10-3/4 in.. The kit features a double-planked hull, vacuum formed seats, chrome-plated deck fittings and running hardware. This will make a great addition to your Classic Chris-Craft Series.

Features
Double planked balsa wood structure with mahogany strip planking on the outside. Comes complete with running hardware and a 2-bladed, 32 mm bronze propeller. Complete set of chrome plated deck fittings for scale realism Vacuum-formed seats and full cockpit instrumentation add to scale appearance.

Kit including
Running hardware (shaft, stuffing box, rudder, strut, and bronze propeller), decals, flags, and extensive instructions.

Requires: 2-channel radio, electronic speed control, 05 motor, motor wire, 6-7 cell battery, charger, and lots of building equipment (see accessory completion guide).

AMATI_ Arno XI Ferrari 1:8 Baukasten Item no.: 25030

Including VAT
For EU Market
3494.00 Kn
469.00 €
544.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

ARNO XI FERRARI

Dieses Rennboot wurde von Timossi gebaut und mit einem 12-Zylinder-Motor von Ferrari ausgestattet. Mit 550 PS erreichte es die Weltrekordgeschwindigkeit von 241,708 km/h. Das Modell kann mit E-Motor ausgestattet werden und ist RC fähig.

Der Bausatz beinhaltet alle mit Laser ausgeschnittenen Holzteile mit doppelter Beplankung aus Furnierholz und Mahagoni
Die Motorverkleidung und Heckflosse, Armaturenbrett und Einzelteile sind aus Stahl.
Auspuffanlage und Runder sind aus Resin gegossen.

Technische Daten:
Maßstab 1:8
Länge 790 mm

DUMAS BOATS_ 1956 Chris-Craft Continental Kit Item no.: ds1243

Including VAT
For EU Market
2973.00 Kn
399.00 €
463.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

1956 Chris-Craft Continental Kit

The 1956 23 ft. Chris-Craft Continental was a stand out among her peers. Her blunt nose, two-toned deck, and sloped transom epitomized this classic era. The Dumas model of the 23 ft. Continental is designed to take you back to the 50s. Our lightweight construction utilizes a die-cut poplar plywood framework with balsa sub-planking. Rich mahogany and blonde basswood veneers provide the fine exterior finish. As with all of our Chris-Craft models each kit includes a complete assortment of detail items. Preformed seats, chrome plated fittings, a complete set of running hardware, color decals, flag and burgee are all included as part of the kit. So, if you have been waiting and wondering what the next Chris-Craft was going to be, your wait is over.

Length: 34 inches
Beam: 12 inches
Scale: 1/8th
Running Hardware: Included in kit

*Additional parts required for R/C:

Power: High Speed Electric Motor
Speed Control: Electronic Speed Control
Battery: 7.2v NiMH Flatpack
Charger: NiMH Battery Charger
Radio Control: 2 Channel Radio Control w/ servo

KRICK_ HE 4 Police Boat Construction Kit Item no.: 20330

Including VAT
For EU Market
2451.00 Kn
329.00 €
382.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

This 15m patrol boat of the Hessian water police was put into service in June 2006. Since then, it has been located in Rüdesheim am Rhein. Thanks to the very good support of the Hessian water police, a model could be created at a very high and precise level. In particular, some details could also be made flexible.

Contents of the kit:
One-piece GRP hull with structured deck, GRP wind hood, shaft systems, rudders, couplings, plastic profiles, brass wires, approx. 300 laser-cut individual parts, fittings, decal sheet and detailed building instructions with construction plan.

Accessoires:
Article-No.20331 Kit interior decoration
20332 Accessory set lamp housing
Drive motors (not included)
2x MAX Speed 400 or
2x MAX P285 Brushless Motors

Technical Specifications
Scale 1:20
Length 760 mm
Width 195 mm
Weight approx. 1700 g

DUMAS BOATS_ 1954 Chris-Craft Commander Express Cruiser Kit Item no.: ds1244

Including VAT
For EU Market
3047.00 Kn
409.00 €
475.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

1954 Chris-Craft Commander Express Cruiser Kit

Style, elegance and class the 1954 36ft. Chris-Craft Commander Express Cruiser has it all

The latest addition to our Chris-Craft fleet is also our first cruiser. The 1954 36ft. Chris-Craft Commander Express Cruiser is sure to turn its fair share of heads. The Commander has the quality features you have come to expect from a Dumas Chris-Craft model. This all wood kit includes step by step instructions complete deck fittings vacuum molded seats and laser cut mahogany cabin detail and trim. The Express Cruiser is designed for radio control and twin screw power using two 6v motors. Bring style, elegance and class to your fleet of Chris-Craft models with the new Commander Express Cruiser.

Length: 36 inches
Beam: 10-3/4 inches
Scale: 1/12th

*Additional parts required for R/C:

Running Hardware: For all twin screw applications
Power: Two 6v motors
Speed Control: Speed Control
Battery: 12v Battery
Charger: Battery Charger
Radio Control: 2 Channel Radio Control w/ servo

DUMAS BOATS_ USCG 36500 36' Motor Lifeboat Item no.: ds1258

Including VAT
For EU Market
1751.00 Kn
235.00 €
273.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

USCG 36500 36' Motor Lifeboat

The CG 36500 is famous for the rescue of 32 men from the tanker S. S. Pendleton, which broke in half during a winter storm off Chatham Bar, the elbow of Cape Cod (also known as New England's graveyard of ships). To this day, the saving of the Pendleton crew remains the single greatest small-boat rescue in the history of the United States Coast Guard. The crew received the Gold Life Saving Medal for hard work during this cold, dark rescue attempt. This is a primarily laser-cut wood kit features plank-on-frame construction.

Length: 27" inches
Beam: 8" inches

DUMAS BOATS_ 1949 Chris-Craft Racing Runabout Kit Item no.: ds1249

Including VAT
For EU Market
2004.00 Kn
269.00 €
312.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

1949 Chris-Craft Racing Runabout Kit

We think the 1949 Chris-Craft 19 ft. Racing Runabout is our sleekest looking Chris-Craft to date. Our 1/8th scale version of this popular racer is 28 inches long with a 9 inch beam. The wood framed hull is covered with expanded pvc and then planked with mahogany veneer. Like our other Chris-Crafts this kit features the finest materials including chrome plated dack fittings complete drive line hardware flag and burgee. Each kit contains everything needed to build a beautiful static display model for the office or den. Or make her RC with a two channel radio, motor NiMH battery and speed control. You will want to make the powerful Racing Runabout the next addition to you fleet.

Length: 28"
Beam: 9"
Scale: 1/8th
Running Hardware: Included in kit

*Additional parts required for R/C:

Power: High Speed Electric Motor
Speed Control: Electronic Speed Control
Battery: 7.2v NiMH Flatpack
Charger: NiMH Battery Charger
Radio Control: 2 Channel Radio Control w/ servo

CALDERCRAFT_ Schaarhörn Shipmodel Kit Item no.: 27021

Including VAT
For EU Market
5208.00 Kn
699.00 €
811.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Schaarhörn Shipmodel Kit

Schaarhorn was built in 1908 and used as the Hamburg state Yacht, in 1973Schaarhorn was sold and brought to the U.K. In 1990 she was sold to a preservation society in Hamburg and fully restored. It is now used for pleasure cruises. The model was built using original drawings as well as photographs taken of the restored vessel.

The hull is a fully detailed GRP moulding. Superstructure and deck are CNC cut ply with printed ply overlays. Ships boats are styrene mouldings. Bow and stern decorative scroll work, ships name, saloon windows and door furniture are etched brass. Over 800 fittings are cast from high quality white metal (with 34 for the anchor windlass alone). All wood dowel, rod, wire and cordage are supplied to make this a model to be proud of.

Scale: 1:35
Length: 1140mm
Beam: 180mm

DUMAS BOATS_ 1941 Chris-Craft 16' Hydroplane Item no.: ds1254

Including VAT
For EU Market
2079.00 Kn
279.00 €
324.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

1941 Chris-Craft 16' Hydroplane

One of the rarest Chris-Crafts manufactured. When the Chris-Craft Racing Hydroplane was first delivered, it was accompanied with a warning: "FOR RACING ONLY".
Chris-Craft knew that they had a thoroughbred on their hands. Equipped with a high-performance 121 horsepower KB engine shoehorned in, the three in-line carburetors protruded above the deck. The streamlined red fairing, designed to shield the carburetors, came to symbolize one of the fastest and most desirable Chris-Craft boats of the pre-war years.
This kit is very similar in construction to our 19' Racing Runabout, kit #1249, in that it utilizes the popular expanded PVC and mahogany double planking method. The new 16' hydroplane kit includes all the items you have come to expect from a Dumas kit. Step-by-Step instructions, flag, decal, chrome plated fittings and laser cut parts which we started using in our #1249 Racing Runabout kit.
So tame the wild beast inside you and build the new Chris-Craft Hydroplane, kit #1254, before it gets away.

Length: 24''
Beam: 8 1/2''
Scale: 1/8th
Running Hardware: Included in kit

*Additional parts required for R/C: (sold separately)

Power: High Speed Electric Motor
Speed Control: Electronic Speed Control
Battery: 7.2v NiMH Flatpack
Charger: NiMH Battery Charger
Radio Control: 2 Channel Radio Control w/ servo

DUMAS BOATS_ Mt. Washington Kit Item no.: ds1235

Including VAT
For EU Market
5804.00 Kn
779.00 €
904.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Mt. Washington Kit

The Dumas kit of The Mount Washington includes everything needed to bring the original grandeur back to life. An ABS plastic hull and a birch plywood die cut superstructure provide the basic shape, while embossed plastic, cabin detail, cast metal fittings, and full color decals add the touches that make the model complete. Running Hardware Included in the kit

Our step by step instructions will help you transform your kit into an historic model that will be sure to find a place in the history of your family.

Length: 44-1/2 inches
Beam: 12 inches
Scale: 1/48th

Additional parts required for R/C:
Power 12V Gearhead motor 50:1
Speed Control 12V Speed Control WP860
Battery 12V Lead Battery
Charger Battery Charger
Radio Control Minimum 2 Channel Radio Control w/ two servos

DUMAS BOATS_ 1964 Chris-Craft 20' Super Sport Item no.: ds1255

Including VAT
For EU Market
2824.00 Kn
379.00 €
440.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

1964 Chris-Craft 20' Super Sport

It's 1964, the Beatles have invaded and America is looking for speed. Chris-Craft's 20' Super Sport filled this need with a choice of a 327 or 430 cu. in. engine, high speed propeller and streamlined rudder.
A Super Sport with a 275 hp V-8 could reach 47 miles per hour! Her sleek, flowing lines shout speed and excitement even standing still. Relive the fun and excitement of a day water skiing at the lake with your own Chris-Craft Super Sport.
This streamlined beauty is the latest addition to our Chris-Craft line of model boats. Its' plank on bulkhead construction utilizes our popular expanded PVC sub-planking and real mahogany exterior planking. The new Super Sport kit has all the items you have come to expect from a Dumas kit. Step by step instructions, laser and die cut parts, chrome plated fittings, colorful flags and decals are all included. Designed for a two channel radio system and a fast electric motor, the kit includes the driveline hardware. So, put on a Beatles album and let's build a new Chris-Craft Super Sport

Length: 30"
Beam: 10"
Scale: 1/8th
Running Hardware: Included in kit

*Additional parts required for R/C:
Power: High Speed Electric Motor
Speed Control: Electronic Speed Control
Battery: 7.2v NiMH Flatpack
Charger: NiMH Battery Charger
Radio Control: 2 Channel Radio Control w/ servo

BILLING BOATS_ Absalon 1:100 RC-Baukasten Item no.: BB0500

Including VAT
For EU Market
4686.00 Kn
629.00 €
730.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Absalon

Die fast 140 m lange Absalon ist ein Mehrzweck-Unterstützungsschiff der dänischen Marine. Durch die besondere Formgebung hat sie Stealth-Eigenschaften. Im Achterbereich der Aufbauten befindet sich ein Hangar für zwei Hubschrauber. Über eine Heckrampe können Truppenpersonal und Militärfahrzeuge aufgenommen werden. Neben den Transportaufgaben kann die Absalon für alle Arten von Seeoperationen und auch zum Ausbringen von Minen eingesetzt werden.

Dieser Baukasten ist mit einem tiefgezogenem ABS-Rumpf und lasergeschnittenen Holzteilen ausgestattet. Ruder, Schiffswelle mit Stevenrohr und Schiffsschraube sind für den Antrieb mit Elektromotor vorgesehen. Alle Beschlagteile sind mit Bauplan und Bauanleitung im Lieferumfang enthalten.

Technische Daten:
Maßstab: 1:100
Länge: 1380 mm
Breite: 220 mm
Höhe: 350 mm

DUMAS BOATS_ 1938 Chris-Craft 16' Painted Racer Item no.: ds1263

Including VAT
For EU Market
1453.00 Kn
195.00 €
227.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

1938 Chris-Craft 16' Painted Racer

The beautiful new Painted Racer is fine example of the painted runabouts of the 1930's and 40's. It's red, white and blue color scheme along with the rich mahogany accents separate this kit from the others in the line.Since this is a painted model the use of mahogany veneer is limited which translates to a great value price. The kit is constructed with balsa strip plank over die cut and laser cut frames. Besides the basic construction differences, this kit includes all the items you have come to expect from a Dumas Chris-Craft kit. Step-by-Step instructions, flag, decal, chrome plated fittings, aluminum accents, and complete drive line hardware.

Length: 24"
Beam: 8 1/2"
Scale: 1/8th
Running Hardware: Included in kit

*Additional parts required for R/C: (sold separately)

Power:High Speed Electric Motor
Speed Control:Electronic Speed Control
Battery: 7.2v NiMH Flatpack
Charger: NiMH Battery Charger
Radio Control: 2 Channel Radio Control w/ servo

DUMAS BOATS_ Chris-Craft 38ft. Commuter 1929 RC Modellkit Item no.: ds1273

Including VAT
For EU Market
3494.00 Kn
469.00 €
544.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Chris-Craft 38ft. Commuter 1929 RC Modellkit

The style and elegance of the Roaring 20's all wrapped up in 38 inches of model building bliss.

The 1929 38ft. Chris-Craft Commuter is the essence of style and class. This model positively drips with mahogany and epitomizes this classic era of American wooden boat building. The craftsman at Chris-Craft out did themselves when they created this beauty and now the model masters at Dumas are offering this little slice of heaven in kit form.

Must love to plank! Besides dripping with mahogany this boat is a tribute to planking. The hull, the deck, floors, and parts of the cabin are all planked, so this one is a dream come true for the serious wooden model boat enthusiast and it is loaded with quality features. We felt it was important to keep this one an all wood kit (with the exception of the caulking strips) Therefore, there is no expanded PVC used in this model. What is used is a combination of birch and poplar plywood, bass and balsa strip and a whole lot of mahogany planking. The hull construction is die-cut birch and poplar ply over poplar ply laser cut frames. The cabin is a series of individual laser cut mahogany parts assembled over a full size plan. The details are immense with some structures assembled like a model within a model (ie, the windshields).

Included in the kit are step by step instructions, plans and figure drawings, complete cast metal and cast urethane deck fittings, color flags and decals, and so much more. The Commuter is designed for radio control with single screw power using a MAX Power 600 motor. Running hardware for the Commuter must sold separately.

Tecnical Data for 1929 38 ft. Chris-Craft Commuter ds1273
Length: 38 inches = 965 mm
Beam: 9-3/4 inches = 248 mm
Scale: 1/12th = 1:12

Additional parts required for R/C:
42124 MAX Power 600 Motor
ro1496 Cuppling
ro1444 Shaft
rb156-03 3-Blade Propeller
67052 Electronic Speed Control 67052 od 67051
667219 NiCad Battery 7,2 V
Battery Charger
2 Channel Radio Control w/ servo
Motorcable and -plugs

Please note some of the running hardware parts are called for early in the construction of the model.

** Zur Zeit ist die Anleitung nur in englischer Sprache verfügbar **

DUMAS BOATS_ Typhoon Raceboot RC Kit Item no.: ds1239

Including VAT
For EU Market
3345.00 Kn
449.00 €
521.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Dumas brings the excitement of the roaring 20s with a 1/10th scale model of the TYPHOON. Our exact scale model is based on a full scale reproduction built by Mark Mason, owner of the New England Boat & Motor Co. The construction is a double-planked hull with birch plywood on the inside and mahogany strip planking on the outside. A complete set of chrome-plated deck fittings is included to add the touch of charm and excitement to the elegant racer. Vacuum form seats with full cockpit instrumentation add to the charm. Running hardware including shaft, stuffing box, rudder, strut, and bronze propeller are included. Drawings and a easy-to-follow booklet will guide you through the building of this racing legend.

Length: 42-1/2 inches
Beam: 8-1/2 inches
Scale: 1/10th
Running hardware included in kit

Additional parts required for R/C: (sold separately)

Power: High Speed Electric Motor
Speed Control: Electronic Speed Control
Battery: 7.2v NiCad Flatpack
Charger: NiCad Battery Charger
Radio Control: 2 Channel Radio Control w/ servo.

DUMAS BOATS_ Dauntless Yacht Kit Item no.: ds1211

Including VAT
For EU Market
1899.00 Kn
255.00 €
296.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Dauntless Yacht Kit

Dumas are pleased to be able to take you back to an era of elegance. In 1946 Sparkman and Stevens designed a 66 ft. commuter boat for the express purpose of carrying commuters down the Hudson River into New York. What a glorious way to beat the traffic. These commuters were used by their owners as everyday transportation to and from work, and for pleasure trips to their favorite spots. The most famous of these commuters was the Dauntless. The Dauntless was owned by a prominent New York family. They undoubtedly considered the Dauntless a great diversion from their day to day business dealings. The days of the Dauntless are gone but you can bring them back. The Dauntless features top quality construction materials. The kit is made almost entirely of 1/8 in. mahogany plywood. All parts are cleanly die-cut, and we have included a variety of detail parts including 38 cast metal fittings. The size of the Dauntless leaves the door wide open for different powering methods. The obvious choices would be scale electric power, high speed electric power, or twin gas power, but you may have your own ideas. Use running hardware kit #2332 for all twin screw, twin power methods in the Dauntless.

Technical Data
Length 1257 mm / 49-1/2 inches
Beam 356 mm / 14 inches
Scale 1:16 / 3/4 in. to 1 ft.

Power 2 Dumas #2004 6 volt motors or #2005 12 volt motors, 2 High Speed electric motors, 2 3.5cc or larger gas marine engines
Running Hardware #2332 for all twin screw powering methods

KRICK_ Classic Jet Sport Boat Construction Kit Item no.: 26321

Including VAT
For EU Market
1229.00 Kn
165.00 €
191.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Classic Jet Sport boat kit

The Classic Jet is a retro design of a two-seater sports boat, which is in the style of the early last century, but equipped with the latest jet technology and the necessary underwater ship. These retro designs are in great demand with the original boats.

The driving fun, which results from the flat and low dipping fuselage and the super powerful jet drive with brushless motor for the low weight of the model, is great. The super-fast speedster remains controllable at all times and with the jet great drift effects are possible.

Engine and remote control installation still have to be done. The kit contains the GRP fuselage with the marked cut-outs for the jet. The wooden decks are cut to size and can be glued to the hull with minor adjustments. After the colourless priming of the wooden parts, the hull can be individually painted.

Technical data:
Length 495 mm
Width 190 mm

Required accessories
Article-No.
65350 Mini jet 20
42441 MAX Marine S282 3500 KV
67071 Seaking V3 30A
79053 2 Mini Servos High Torque for controlling the jet
Remote control min. 3 channels
2S LiPo battery from 2200 mAh

Paints and adhesives
Aerot Epoxy adhesive 1h Order no. 44008 or
UHU endfest Order no. 45670

Microballoons Order no. 44020

Plastic Putty Order no. 44089 or
Wonderfill Order no. 44096

Superglue Gel Order no. 79059

pore filler

Colours of your choice

BILLING BOATS_ Slo-Mo-Shun IV 1:12 RC-Baukasten Item no.: BB0520

Including VAT
For EU Market
1334.00 Kn
179.00 €
208.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Slo-Mo-Shun IV Renboot von 1949

Die Slo-mo-shun IV entstand 1949 aus einer verrückten Idee dreier Männer aus Seattle, dass schnellste Rennboot der Welt zu bauen. Das Ergebnis überzeugte vollkommen. Die Slo-mo-shun gewann Rennen um Rennen (1950 mit Ted Jones den Gold Cup in Detroit, die prestigeträchtige Harmsworth Trophy und viele weitere).

Aber sie war mehr als nur ein Rennboot. Die Slo-mo-shun IV berührte die Herzen tausender Fans und den Bürgern Seattles.

Dieser Laserbausatz wird super leicht auf lasergeschnittenen Spanten aufgebaut. Welle. Stevenrohr und Ruder für den Betrieb sind enthalten, ebenso alle Beschlagteile für die Optik.

Benötigte Farben
Artikel-Nr.
BCA007 Sea blau 22 ml Billing Boats
BCA009 Bright rot 22 ml Billing Boats
BCA011 Schwarz 22 ml Billing Boats
BCA013 Trainer gelb 22 ml Billing Boats
BCA014 Matt weiß 22 ml Billing Boats
BCA015 Silber 22 ml Billing Boats
BCA016 Gold 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA036 Mahagoni 22 ml Billing Boats

Technische Daten:
Maßstab: 1:12
Länge: 750 mm
Breite 310 mm
Höhe: 215 mm

KRICK_ Racecat Pan 21 V2 ARTR Item no.: 26311

Including VAT
For EU Market
2451.00 Kn
329.00 €
382.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

NEW! Now with more powerful drive and water-cooled brushless motor.

This racing catamaran with outboard engine is an absolutely new design by the well-known racing boat designer Peter Schmitt. Catamarans can achieve very high speeds due to their light and wide design and narrow hulls. The wide fuselage is made of super light and robust Epoxy-GFK. The red and white design is already mounted and the drive is completely mounted. Under the GRP canopy the fuselage is still covered with a smooth plastic lid and adhesive tape. Servo and speed controller are completely installed.

New in the current version is the already installed, water-cooled internal brushless type 2848 as well as a high-performance controller.

To complete this model, only a 2-channel remote control and a drive battery with suitable charger are required.

scope of supply
Pan 21 catamaran model painted and decorated
outboard motor mounted
rudder servo mounted
Electronic speed controller 60A with 4 mm GK plug

Technical data:
Total length 770 mm
Hull length 660 mm
width of fuselage 270 mm
Fuselage height 83 mm
Hull weight empty approx. 700 g

Recommended accessories (not included)
roF2301| Futaba T3PRKA 3/3/0 Remote control 2.4 GHz
Battery LiPo 2S, from 4000mAh
Suitable charger
703353| Double-sided adhesive tape for fixing the receiver
70350| Double-sided hook and loop fastener for fixing the battery |ro5557| Wave grease GLS for greasing the flexible shaft

replacement parts
Order no.
26312 Pan 21 Fuselage shell alone without engine and electronics
26313 Canopy only (spare part)
26316 Brushless outboard motor with plastic screw
67043 Speed controller 60A, BEC 3A

DUMAS BOATS_ Carol Moran Kit DUMAS Item no.: ds1250

Including VAT
For EU Market
961.00 Kn
129.00 €
149.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Carol Moran Kit

This is the Dumas 1/72 scale Carol Moran Tugboat model kit.

Here at Dumas we know people are fascinated by tug boats. There is something about a relatively small boat pushing or a towing a comparative behemoth. And here at Dumas we are known for our tugs. Whether it be the Shelley Foss, Mister Darby, Brooklyn, or Jersey City, we cover over a century of tugs. With the introduction of the Carol Moran, we have broken into the area of small highly detailed scale rc tugs. Our model of the Carol Moran features a two piece vacuum formed hull. The superstructure is constructed of highly conformable diecut expanded PVC. There are detail parts galore including everything laser cut and cast parts to decals and flag. Just because she is small does not mean you have to give up realism. Best of all, the Carol Moran is a full functioning rc model. All the running hardware is included, and we show you how to power her using a servo from your two channel radio. So try your hand at the Carol Moran. An exceptional tug at an exceptional value.

FEATURES
Plastic vacuum parts pulled from either .040 or .020 sheet styrene
balsa and pine laser and die-cut PVC plastic parts
Brass and cast metal running hardware and deck fittings
Full size plans and building stand
Mylar decals
May be build as a static model or as an electric powered radio control model, additional items required

INCLUDES
All wood metal and plastic pieces to build boat, running hardware, decal sheet, instruction sheet

REQUIREMENTS
Tools, paint glue and adhesives
2ch radio, 4.8V battery, standard servo if radio control operation is desired

SPECIFICATIONS
Length: 17" (438mm)
Beam: 4" (121mm)

ROMARIN_ Neptun Tug Boat Item no.: ro1030

Including VAT
For EU Market
1036.00 Kn
139.00 €
161.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

NEPTUN THE TUG BOAT

The Tug Boat Neptun is a remote controlled model of a tug boat in 1:50 scale as they are still found in many ports. Model of this construction were harbour tugs of the Bugsier series in Hamburg. In the construction of the model much emphasis was placed on true to scale and lovingly executed details. On the lower mast platform is a functioning, rigid fire extinguisher. The Neptune is particularly manoeuvrable thanks to the swivelling Kort nozzle, so that all difficult towing and manoeuvring operations are easily executed. The towing hook can also be opened by remote control. The separate fittings kit contains all of the components for detailed fitting of the model, e.g. Anchor, windlass, bollard, life raft, illuminated top and position lights, towing winch, tire fender and many other small parts.

Kit Contents
- Hull, bulwark, machine and wheelhouse of vacuum formed ABS plastic
- Fire monitor and other plastic hardware
- Laser cut wood parts for interior work
- Prop shaft, propeller
- Injection moulded Kort nozzle, functional towing gear and stanchions
- RC connection parts, small accessories for construction.
- Detailed fully illustrated construction manual, detailed drawings

Scale 1:50
Length 570 mm
Width 175 mm
Total displacement 2500 g

Propulsion accessories
ro1031 Fittings kit Neptun
42275 Electric Motor MAX Gear 2.5: 1
42128 Set of suppression capacitors
67051 Speed Controller WP1060
- Battery 6 - 7.4 volts
- Remote control from 2-channel
65150 Electric pump for fire monitor

BILLING BOATS_ St. Canute 1:50 RC-Baukasten Item no.: BB0700

Including VAT
For EU Market
1184.00 Kn
159.00 €
184.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

St. Canute

Die St. Canute wurde 1931 auf Frederikshavns Værft og Flydedok A/S gebaut. Fuhr viele Jahre unter seinem ursprünglichen Namen "St. Knud" als Schlepper und Eisbrecher im Hafen von Odense (Fünen). "St. Canute" ist 28 m lang, 7,60 m breit und hat 3,80 m Tiefgang.

Diese Baukästen sind auf klassischer Spantenbauweise aufgebaut. Alle Holzteile sind mit Laser präzise ausgeschnitten. Ein 1:1 Bauplan, Bauanleitung, sowie alle zum Aufbau benötigten Holz-, Kunststoff- und Mesing-Beschlagteile sowie Schiffswelle und 3-Blatt Schiffspropeller sind im Lieferumfang enthalten.

Als Antrieb ist von Billing Boats ein MAX Power 400 mit 38 mm Länge vergesehen. Wir empfehlen aufgrund des höheren Drehmomentes den MAX Power 450. Allerdings muss dann die Aussparung im Holzspant entsprechen etwas vergrößert werden. Vor dem Motor ist reichlich Platz für den Akku. Entweder kommt ein 6V Bleiakku oder 7,2 V Racing-Pack zum Einsatz.

Technische Daten:
Maßstab: 1:50
Länge: 560mm
Breite: 155mm
Höhe: 420mm

Für den Bau und Komplettierung der St. Canute benötigen Sie noch weiteres Zubehör, Farben und Klebstoffe. Einige Vorschläge finden Sie im Reiter "Weitere Info"

Benötigtes Zubehör
Fernsteuerung mit min. 2 Kanälen
Standardservo
Antriebsakku 6V
Fahrtregler
Elektromotor
Kabel und Steckverbindungen

Empfohlene Klebstoffe
Artikel-Nr.
48515 UHU Holzleim wasserfest
44052 DELUXE Roket Max Cyano 20g
44035 DELUXE RC Modeller Kraftkleber
44048 DELUXE Roket Plastic Klebstoff
44002 DELUXE Speed Epoxy II 4 min.

Vom Hersteller empfohlene Farben für die originalgetreue Gestaltung des Modells Artikel-Nr.
BCA003 Emerald grün 22 ml Billing Boats
BCA005 Tan braun 22 ml Billing Boats
BCA011 Schwarz 22 ml Billing Boats
BCA013 Trainer gelb 22 ml Billing Boats
BCA014 Matt weiß 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA030 Dark Ad grau 22 ml Billing Boats
BCA036 Mahagoni 22 ml Billing Boats

BILLING BOATS_ Banckert Schlepper 1:50 RC-Baukasten Item no.: BB0516

Including VAT
For EU Market
1408.00 Kn
189.00 €
219.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Banckert Schlepper

Der Schlepper Banckert wurde 1965 auf der N.V. Scheepswerven in Millingen, Holland, gebaut und "Maasbank" getauft. "Maasbank" tat 12 Jahre lang Dienst in dem "Europort" genannten westlichen Teil Hollands. Sie nahm an zahlreichen Rettungsaktionen in der Nordsee teil und schleppte Schiffe im gesamten Bereich von Frankreich nach Norwegen. Im September 1977 wurde der Schlepper in "Banckert" umgetauft.

Spezifikationen des Originals:
Länge : 32,75m
Deckbreite : 7,85m
Tiefgang : 3,40m
Maschine : 1800 PS


Baukastenbeschreibung:
Dieser Baukasten ist mit einem tiefgezogenem ABS-Rumpf und lasergeschnittenen Holzteilen ausgestattet. Ruder mit Kortdüse, 4 mm Schiffswelle mit Stevenrohr und 3-Blatt Schiffsschraube sind für den Antrieb mit einem Elektromotor vorgesehen. Alle Beschlagteile sind mit Bauplan und Bauanleitung im Lieferumfang enthalten.

Technische Daten:
Maßstab 1:50
Länge: 650mm
Breite: 160mm
Höhe: 420mm

Benötigtes Zubehör
Fernsteuerung mit min. 2 Kanälen
Standardservo
Antriebsakku 6-7,4 V
Fahrtregler
Elektromotor
Kabel und Steckverbindungen

Vom Hersteller empfohlene Farben zur originalgetreuen Farbgebung des Modells
Artikel-Nr.
BCA010 Matt Lemon 22 ml Billing Boats
BCA011 Schwarz 22 ml Billing Boats
BCA012 Pale grau 22 ml Billing Boats
BCA014 Matt weiß 22 ml Billing Boats
BCA015 Silber 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA018 Mediterran blau 22 ml Billing Boats
BCA021 Crimson rot 22 ml Billing Boats
BCA035 Signal rot 22 ml Billing Boats
BCA036 Mahagoni 22 ml Billing Boats

Eine Auswahl an benötigten Klebstoffen
Artikel-Nr.
ro5015 Stabilit Express 2-Komponenten Klebstoff
48515 UHU Holzleim Wasserfest
44051 DELUXE Peket Rapid Cyano Sekundenkleber
44035 DELUXE R/C Modeller Kraftkleber
44007 DELUXE Speed Epoxy 20 min

BILLING BOATS_ Elbjørn Eisbrecher 1:75 RC-Baukasten Item no.: BB0536

Including VAT
For EU Market
1483.00 Kn
199.00 €
231.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Elbjørn

In der Zeitspanne von 1954 - 1996 war die M/S Elbjørn aktiver Bestandteil der dänischen Eisbrecherflotte. Die Karriere als Eisbrecher endete abrupt am 12. Februar 1996 als ein Generator an Bord explodierte. Zwar konnte die Elbjørn noch aus eigener Kraft den Hafen erreichen, aber es war klar, dass die Tage als Eisbrecher vorbei waren. Heute ist der Eisbrecher ein Restaurant- und Museumsschiff im Hafen von Aalburg.

Wie auch das Original wird das Modell mit 2 Schrauben angetrieben. Das Besondere ist jedoch die Anordnung der Schrauben. Ein 4-Blatt Messingpropeller mit 50 mm Durchmesser sitzt wie üblich am Heck des Schiffes. Die zweite Schiffsschraube mit 30 mm Durchmesser ist aber am Bug montiert. Zwei Elektromotoren treiben die Schiffsschrauben an.

Baukasteninhalt:
Alle zum Aufbau benötigten Holz-, Kunststoff- und Beschlagteile sind im Lieferumfang enthalten. Ein Bauplan im Maßstab 1:1 und eine Bauanleitung mit vielen Explosionszeichnungen vervollständigen den Bausatz von Billing Boats.

Technische Daten
Maßstab 1:75
Länge 690 mm
Breite 165 mm
Höhe 360 mm


RC-Funktionen
Rudersteuerung, Motorregelung

Empfohlenes Zubehör für den Antrieb
Artikel-Nr.
67052 1x Fahrtregler Quicrun WP860 Dual Brushed für 2 Motoren
42242 2x MAX Power 450 Elektromotor
42128 2x Universal Entstörsatz für Bürstenmotoren
67521 1x Motoranschluss Stecker+Buchse rund (10 Paar)
67537 1x Zwillingslitze 2x1,5mm² 2m

Kupplungen besthend aus
63800 2x Stegkupplung Verbinder
63823 2x Welleneinsatz f.Stegkupplung 2,3mm
63830 2x Welleneinsatz f.Stegkupplung 3mm

Benötigte Acryl Streich-Farben zum originalgetreuen Bemalen
Artikel-Nr.
BCA003 Brunswick grün 22 ml Billing Boats
BCA004 Orange 22 ml Billing Boats
BCA005 Tan 22 ml Billing Boats
BCA006 Rumpf rot 22 ml Billing Boats
BCA009 Bright rot 22 ml Billing Boats
BCA010 Matt Lemon 22 ml Billing Boats
BCA014 Matt weiß 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA018 Mediterran blau 22 ml Billing Boats
BCA022 Matt schwarz 22 ml Billing Boats
BCA030 Dark Ad grau 22 ml Billing Boats
BCA036 Mahagoni 22 ml Billing Boats

Weiteres Zubehör siehe auch Reiter "Weitere Infos"

DUMAS BOATS_ Jenny Lee Tug DUMAS Item no.: ds1268

Including VAT
For EU Market
1601.00 Kn
215.00 €
249.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Jenny Lee Tug

The Jenny Lee is based off harbor tugs that operated in the Southern United States from the early 1900's to the 1940's. This model features balsa planked construction over laser cut poplar plywood frames with laser cut frames and expanded pvc construction for the pilot house.

Kit Features
- Laser Cut Frames
- Die-Cut Deck & Cabin Parts
- Balsa Planked Hull
-Deck Fittings
- Full Color Decal & Flags
- Step by Step Instructions in english language

Not including the kit:
Shaft
Stuffing Box with Oilite Bearings
Coupling
Coupling Rod
Set Collar
Three Blade Brass Propeller
Fasteners

To complete the kit as an RC Model following items are nessesery:
Max Power 500 Electric Motor
Motor mount 500 adjustable
Battery 7,2 V - 7,4 V
Speed Control WP1040
min. 2 Channel Radio
Shaft M4
Coupling 3,17 to 4 mm
Propeller 40 mm dia.

Tecnical Data
Length: 24"
Beam: 7"
Scale: 1/32

DUMAS BOATS_ The George W. Washburn Kit Item no.: ds1260

Including VAT
For EU Market
1751.00 Kn
235.00 €
273.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

The George W. Washburn Kit

The George W. Washburn was launched by the Cornell Steamboat Company to move barges and cargo like stones, sand, and bricks up and down the Hudson River between Albany and New York City. She was, during her early years, considered the fastest tug on the Hudson. Since she took on paying passengers, her appearance was kept up. It was said that a Cornell Steamboat could be notices from great distances by the yellow and black color of the smoke stacks. Sad to say, however, that the George W Washburn and Cornell Steamboat Company are no longer around today. This kit features laser-cut plank-on-frame construction.

Features
Laser cut plank on frame construction, Die cut decks and cabin parts. Balsa planked hull. Metal deck fittings. Full color decals and flags
The Kit is including all wood to build the kit, rigging thread, deck fittings, molded plastic parts, decals, flags. plans and instructions

Technical Data
Length 762 mm / 30 inch
Beam 140 mm / 5-1/2 inch
Scale 1:48

Additional parts required for R/C:
Running Hardware Kit
Motor MAX Power 600
Electronic Speed Control WP1060
7.2 Volt NiCad Battery
Battery Charger
Radio Control min. 2 Channel with servo

BILLING BOATS_ Zwarte Zee 1:90 RC-Baukasten Item no.: BB0592

Including VAT
For EU Market
1781.00 Kn
239.00 €
277.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Zwarte Zee

Die Zwarte Zee wurde 1963 auf J. & K. Smit's Scheepswerven N.V. in Kinderdijk, Holland, gebaut. Länge 77,50 m, Breite 12,35 m, Tiefgang 6,90 m, Verdrängung 1.539 BRT. Zwei Smit-M.A.N.-Turbodieselmotoren leisten 9.000 PS. Diese Maschinen treiben über Vulcan Flüssigkeitswandler und Untersetzungsgetriebe eine gemeinsame Schraubenwelle. Wird ein schnelles Manöver notwendig, kann die eine Maschine vorwärts laufen, während die zweite rückwärts läuft. Geschwindigkeit 18 Knoten.

Dieser Baukasten ist mit einem tiefgezogenem ABS-Rumpf und lasergeschnittenen Holzteilen ausgestattet. Ruder, Schiffswelle mit Stevenrohr und Schiffsschraube sind für den Antrieb mit Elektromotor vorgesehen. Alle Beschlagteile sind mit Bauplan und Bauanleitung im Lieferumfang enthalten.

Technische Daten:
Maßstab 1:90
Länge ca. 900 mm
Höhe ca. 370 mm
Breite ca. 155 mm

Notwendiges Zubehör
Artikel-Nr.
42124 MAX Power 600 Elektromotor 1x
42128 Entstörkondensatoren (Satz)
63702 Wellenkupplung 3,18 auf 4 mm 1x
63922 Motorträger verstellbar 1x
Stromversorgung 6-7,2V ab 4 Ah
Fahrtregler min. 20 A Leistung
Fernsteuerung min. 2 Kanäle
Farben und Klebstoffe

Benötigte Farben
Artikel-Nr.
BCA001 Weiß 22 ml Billing Boats
BCA005 Tan braun 22 ml Billing Boats
BCA009 Bright rot 22 ml Billing Boats
BCA010 Matt Lemon 22 ml Billing Boats
BCA011 Schwarz 22 ml Billing Boats
BCA012 Pale grau 22 ml Billing Boats
BCA013 Trainer gelb 22 ml Billing Boats
BCA014 Matt weiß 22 ml Billing Boats
BCA016 Gold 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA018 Mediterran blau 22 ml Billing Boats
BCA032 Lime grün 22 ml Billing Boats
BCA036 Mahagoni 22 ml Billing Boats
BCA039 Primer/Grundierung 22 ml Billing Boats
BCA040 Verdünner 22 ml Billing Boats

Alle Modelle dieser Serie:
Bestell-Nr.
BB0478 Smit Rotterdam 1:75
BB0506 Fairmount Alpine 1:75
BB0516 Banckert 1:50
BB0528 Smit Nederland 1:33
BB0592 Zwarte Zee 1:90
BB0700 St. Canute 1:50

BILLING BOATS_ Smit Rotterdam 1:75 RC-Baukasten Item no.: BB0478

Including VAT
For EU Market
2525.00 Kn
339.00 €
393.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Smit Rotterdam

Die Smit Rotterdam wurde 1975 für Smit International BV in Holland gebaut. Bei seiner Fertigstellung war er mit einer Verdrängung von 2.273 t, einer Länge von 75 m und 22.000 PS der größte und stärkste Schlepper der Welt. Er erreicht 16,5 Knoten. Das Boot hat Bulb-Steven und Bugstrahlruder, die Ausrüstung umfasst das Neueste auf dem Gebiet der Navigation, Steuerung und Radiokommunikation.

Dieser Baukasten ist auf klassischer Spantenbauweise aufgebaut. Alle Holzteile sind mit Laser präzise ausgeschnitten. Ein 1:1 Bauplan, bebilderte Bauanleitung mit Stückliste, sowie alle zum Aufbau benötigten Holz-, Kunststoff- und Beschlagteile sind im Lieferumfang enthalten.

Neben der Fernsteuerung, Akkus, Ruderservo, Fahrtregler, Farben und Klebstoffe werden noch Motoren, Motorhalterung und Wellenkupplung benötigt. Soll das Modell noch mit weiteren Funktionen ausgestattet werden so können Soundmodul und Beleuchtungen das Modell noch realistischer erscheinen lassen.

Technische Daten:
Maßstab: 1:75
Länge: 900 mm
Breite: 200 mm
Höhe: 500 mm

Für die Lackierung nach Abbildung enötigten Farben
BCA008 Brunswick grün 22 ml Billing Boats
BCA009 Bright rot 22 ml Billing Boats
BCA011 Schwarz 22 ml Billing Boats
BCA012 Pale grau 22 ml Billing Boats
BCA013 Trainer gelb 22 ml Billing Boats
BCA014 Matt weiß 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA018 Mediterran blau 22 ml Billing Boats

DUMAS BOATS_ The Lackawanna Tug Kit Item no.: ds1251

Including VAT
For EU Market
2570.00 Kn
345.00 €
400.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

The Lackawanna Tug Kit

This coastal tug built in 1900 not only burned coal for power but also but also hauled barges filled with coal along the New England coast. The Lackawanna was 137 feet long but her gorgeous sheer and festive air made her appear almost yacht like. Our 33 inch model of the Lackawanna captures all the beautiful lines of this classic tug.
This kit features a vacuum ABS plastic hull and expanded PVC diecut parts. The Lackawanna is not short on detail with tons of laser cut parts and loads of castings and turnings. Top it off with clear and concise step by step plans and instructions and you have a great kit of an Early 20th Century Tug that is truly a pleasure to build.

Length: 33 inches
Beam: 6 inches
Power: 6v Motor

You will also need (Running Hardware):
-a 3/16" dia. prop shaft
-a stuffing box
-a brass coupling
-a coupling rod
and a 1 3/4" diameter 3 bladed propeller

DUMAS BOATS_ Lord Nelson Victory Tug Kit Item no.: ds1225

Including VAT
For EU Market
2824.00 Kn
379.00 €
440.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Lord Nelson Victory Tug Kit

Everybody has an opinion as to which boat they like the best. Here at Dumas, the opinion poll winner is the Victory Tug. There are a number of reasons why this charming little ship has captured the hearts of so many modelers. At 28 inches long, it is perfect for those of us with smaller working areas. The quality materials, such as the balsa planking, and stainless steel rails lead to an excellent building result. Basically, everybody loves tug boats, and the Victory Tug with all of her natural wood and scruffy good looks is an exceptional find. The Dumas model of the Victory Tug provides all the high quality materials necessary to complete the kit for a static model.

If you do decide to radio control the Victory Tug, all you need is a 6V motor, a Electronic Speed Control, a 7.2V NiMH battery pack, and a 2 channel radio to get her on the water.

In the Summer of 2012 this model underwent a complete redesign. In addition to the change to balsa planking the model features several expanded PVC diecuts. Ease of construction as well as the documentation have been greatly improved. The model now includes a 51 page instruction manual and 64 detail drawing figures.

The new Victory Tug is better than ever.

Length 28 inches
Beam 10 inches
Scale 3/4 in. to 1 ft.

DUMAS BOATS_ Jersey City Kit Item no.: ds1248

Including VAT
For EU Market
2898.00 Kn
389.00 €
451.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Jersey City Kit

The Jersey City is the latest addition to the Dumas tugboat collection. A railroad tug from the 1960s, the Jersey City can still be seen working on the eastern seaboard. She is designed for radio control using a two channel radio, or this detailed workhorse makes a great static model for your den or office.

The kit features a vacuum formed plastic hull, die cut expanded pvc super structure parts, laser cut wood detail parts, and all the fittings necessary to outfit her for a hard days work.

*Additional parts required for R/C:

Engine: 6V Electric Motor or 12V Electric Motor
Speed Control: Electronic Speed Controller
Battery: 7.2v NiMh Racing-Pack or 6V Sealed Battery
Charger: Battery Charger for Racing-Pack and R/C
Radio Control: we recommend a 2 Channel Radio Control System with 1 additional Servo for the Rudder

Length: 36 inches
Beam: 9 inches
Scale: 1/32
Power: 6v motor or 12v motor

BILLING BOATS_ Smit Nederland 1:33 RC-Baukasten Item no.: BB0528

Including VAT
For EU Market
3122.00 Kn
419.00 €
486.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Smit Nederland Schlepper

Die Smit Nederland wurde 1979 von der BV Scheeps-Werft & Machinefabrik "De Merwede" in Hardinxveld, Holland, gebaut. Länge 28,40 m, Breite 8,85 m, Tiefgang 3,85 m. Sie wird von zwei "Stork Werkspoor" Dieselmotoren angetrieben, die bei 1000 U/min. 1.800 PS leisten. Die Geschwindigkeit beträgt 12 Knoten bei einem Aktionsradius von 2.250 Seemeilen. Eine Besonderheit des Originals sind die in einem Mantelrohr laufenden Verstellschrauben, sowie zwei Querstrahlruder, die dem Schiff eine gute Manövrierfähigkeit verleihen.

Dieser Baukasten ist mit einem tiefgezogenem ABS-Rumpf und lasergeschnittenen Holzteilen ausgestattet. Becker-Ruder mit Kortdüse, Schiffswellen mit Stevenrohr und Messing-Schiffsschrauben sind für den Antrieb mit Elektromotor vorgesehen. Alle Beschlagteile sind mit Bauplan und Bauanleitung im Lieferumfang enthalten.

Technische Daten:
Maßstab 1:33
Länge 870mm
Breite 270mm
Höhe 520mm

Notwendiges Zubehör
Artikel-Nr.
42124 MAX Power 600 Elektromotor 2x
42128 Entstörkondensatoren (Satz) 2x
63702 Wellenkupplung 3,18 auf 4 mm 2x
ro4070 Motorträger 600er (540) 2x
667256 Bleiakku 6V 12 Ah als Stromversorgung für die Motoren
67052 Fahrtregler WP860 Dual
79059 Servo für Ruderanlage
67521 Motoanschluss Rundstecker Satz
ro4039 Akkuanschluss Flachstecker Satz
67537 Zwillingslistze 1,5 qmm Querschnitt
Fernsteuerung min. 2 Kanäle
Farben und Klebstoffe

Benötigte Farben
Artikel-Nr.
BCA008 Brunswick grün 22 ml Billing Boats
BCA010 Matt Lemon 22 ml Billing Boats
BCA011 Schwarz 22 ml Billing Boats
BCA012 Pale grau 22 ml Billing Boats
BCA013 Trainer gelb 22 ml Billing Boats
BCA014 Matt weiß 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA018 Mediterran blau 22 ml Billing Boats
BCA021 Crimson rot 22 ml Billing Boats
BCA023 Kupfer 22 ml Billing Boats
BCA030 Dark Ad grau 22 ml Billing Boats
BCA036 Mahagoni 22 ml Billing Boats

Weitere RC-Modelle von Billing Boats in unserem Sortiment:
BB0478 Smit Rotterdam 1:75
BB0506 Fairmount Alpine 1:75
BB0516 Banckert 1:50
BB0528 Smit Nederland 1:33
BB0592 Zwarte Zee 1:90
BB0700 St. Canute 1:50

MANTUA MODEL_ Anteo Schlepper Baukasten Item no.: 800743

Including VAT
For EU Market
3196.00 Kn
429.00 €
498.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Anteo

Ein typischer Schlepper, wie man ihn vorwiegend in südeuropäischen Häfen bis in die 70er Jahre hinein vorgefunden hat. Dieses Modell zeichnet sich durch seine besonders gefällige Form aus und ist damit eine Augenweide als Stand- und als Fahrmodell. Dank der Holzkonstruktion ist es möglich das Modell mit wenigen Änderungen zum Einbau einer Dampfmaschine vorzusehen. Die Alex Horizontal stellt dabei die ideale Motorisierung für dieses Modell dar.

Der Rumpf wird mit Kiel und Spanten aus lasergeschnittenen Holzteilen aufgebaut und anschließend mit Leisten beplankt. Sollte Anteo als Fahrmodell eingesetzt werden so empfiehlt sich hier noch ein Überzug mit Glasgewebe um die Rumpfschale widerstandsfähig zu machen. Auch die Aufbauten werden aus lasergeschnittenen Teilen zusammengesetzt. Die Echtholzbrücke ist eine Augenweide und die vielen Details am Schiff machen viel Freude beim Zusammenbau. Der Beschlagsatz ist reichhaltig und komplett mit Stevenrohr und Welle ausgestattet. Viele Beschlagteile, sind in Messingguss und Holz gefertigt und von bester Qualität. Das gesamte Schanzkleid ist als geätzte Messingplatte beigefügt. Die einzelnen Platten stehen damit vorbildgetreu heraus.

Ein rundum gelungener Baukasten mit ausführlichen Bauplänen und einer deutschen Bauanleitung.

Antriebsalternativen:
1. Dampfmaschine Alex horizontal
Artikel-Nr. 22301
2. E-Motor Max Power 900 P
Artikel-Nr. 42265
3. Elektromotor Decaperm 12V
Artikel-Nr. 42175

Beim Fahrbetrieb wird der Einsatz des 60 mm Vierblatt-Propellers 544061 empfohlen.

Technische Daten:
Maßstab: 1:30
Länge über alles: 890 mm
Breite über alles: 240 mm
Höhe: 605 mm

DUMAS BOATS_ Brooklyn Tug Kit Item no.: ds1238

Including VAT
For EU Market
3569.00 Kn
479.00 €
556.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Brooklyn Tug Kit

The Brooklyn was built in 1910 and owned by the New York Dock Co. Steam powered all her career she was inauspiciously sold for scrap in 1960. She was one of many railroad tugs, designed to transfer railroad cars from one side of New York to the other on barges known as car floats. Railroad tugs almost always towed barges alongside, with one car floating on each side, hence the heavy guards and the use of single posts instead of H-bitts. Railroad tugs were characterized by long houses because there was no need of towing space aft.

The Dumas kit of the Brooklyn is designed to give you the salty appearance of the original boat. Not just your average tug, the Brooklyn has the characteristics that set the early tugs apart. You get a vacuum formed hull, all the parts to build the conventional die cut superstructure, and enough detail (laser cut parts, lots of castings, brass railings, etc.) to keep you busy through many a long winter night. If you are one of many who admire the pugnacious spirit of tug boats then this one is for you. Another classic model from The Model Boat People.

Length: 39-1/2 inches
Beam: 9-1/2 inches
Scale: 1/32
Power: 12V Motor

CALDERCRAFT_ Joffre Baukasten Item no.: 27000

Including VAT
For EU Market
3569.00 Kn
479.00 €
556.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Joffre Dampfschlepper

Die Joffre wurde im Jahre 1916 von der Ardrossan Dry Dock & Shipbuilding Co. gebaut und wurde in Newcastle eingesetzt. Sie war sowohl für Schleppdienste im Küstenbereich als auch auf dem Fluss Tyne eingesetzt. Ungewöhnlich für die Schlepper dieser Zeit waren zwei Schlepphaken, wobei der hintere für kleinere Schleppzüge diente.

Der Baukasten der Joffre ist mit einem GFK-Rumpf und CNC-geschnittenen Holzteilen für Deck und Aufbauten ausgestattet. Diese neuen vorgefrästen Teile verbessern die Passgenauigkeit erheblich und erleichtern den Zusammenbau damit sehr. Der Beschlagsatz enthält über 300 Metallgussteile, die das Modell äußerst realistisch aussehen lassen. Ebenso sind 3 Crewmitglieder mit Bordhund enthalten.

Ein großer Bauplan und eine ausführliche deutsche Bauanleitung mit Detailskizzen sind ebenso enthalten.

Die Joffre eignet sich sehr gut für den Einbau der Dampfmaschine Alex mit einem horizontalen Kessel und separaten Gastank. Der Einbau ist in dem geräumigen Rumpf unproblematisch, sollte aber vom Beginn des Modells an berücksichtigt werden.

Zubehör:
42260 Max Speed 800 Elektromotor mit 6 Volt betrieben
oder
42275 MAX Gear Elektromotor mit Getriebe 2,5:1 mit 12 Volt betrieben
oder
22301 Dampfmaschine Alex horizontal mit liegendem Kessel
22313 Gastank

Empfohlene Ergänzung
Artikel-Nr.
534041 Messingschiffsschraube 3-Blatt 40mm Ø
Besserer Wirkungsgrad und höhere Belastbarkeit zeichnen diesen Propeller, gegenüber den Gußpropeller aus dem Bausatz, aus.

Technische Daten:
Maßstab: 1:48
Länge: 775 mm
Breite: 190 mm

CALDERCRAFT_ Alte Liebe Baukasten Item no.: 27020

Including VAT
For EU Market
3717.00 Kn
499.00 €
579.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Deutscher Hafenschlepper von 1931

Fast dreißig Jahre hindurch bis 1960 gehörte der Cuxhavener Reededampfer "Alte Liebe" zum alltäglichen Bild des Hafens. Rund um die Uhr unter Dampf, war sie als Lotsenversetzboot, für den täglichen Hafendienst als Schlepper, zur Hilfeleistung in Notfällen, als Feuerlöschboot und Bergungsschiff im Einsatz. Ihre Dreifach-Expansions-Dampfmaschine leistete 360 PS, die Besatzung bestand aus 1 Kapitän, 1 Maschinist, 3 Heizern und 6 Matrosen.

Das Modell wurde nach Originalzeichnungen und historischen Fotos von Inneneinrichtung unter Mitwirkung ehemaliger Besatzungsmitglieder rekonstruiert. Der komplett abnehmbare Aufbau der Alten Liebe ist so breit bemessen, dass der Zugang zum Rumpfinneren sehr einfach ist. Der Einbau einer Dampfmaschine in den großvolumigen Rumpf ist völlig unproblematisch. Der Baukasten ist reichhaltig ausgestattet. Ein herrlicher GFK-Rumpf mit allen Details, aus Sperrholz gestanztes Deck, Schiffswelle Fineline M4 , dazu ein Beschlagsatz mit allen erdenklichen Details aus Metallguss. Selbst die Teile für die Inneneinrichtung der Brücke sind im Baukasten enthalten. Bauplan und deutsche Bauanleitung vervollständigen diesen sehenswerten Baukasten.

Empfohlene Dampfmaschine
22303 Dampfmaschine Viktor horizontal mit liegendem Kessel

Empfohlene Elektromotoren
42276 MAX Gear Getriebemotor 6:1 oder
42265 MAX Power 900 Direktantrieb

Empfohlene Schiffsschraube
544055 4-Blatt, Ø 55 mm (für Dampfantrieb)
534050 3-Blatt, Ø 50 mm (für Elektroantrieb)

Technische Daten
Maßstab: 1:25
Länge über alles: 940 mm
Breite: 241 mm

ROMARIN_ Happy Hunter Salvage Tug Kit Item no.: ro1106

Including VAT
For EU Market
4016.00 Kn
539.00 €
625.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Scale model of an ocean-going salvage tug to 1 : 50 scale

The Happy Hunter is a scale reproduction of a Dutch ocean-going salvage tug to a scale of 1 : 50.

The boat is powered by a direct-drive, i.e. non-geared system, in the form of two high-torque MAX Power 700 electric motors. These are low-revving power plants driving a pair of high-performance marine propellers. Fixed Kort nozzles increase thrust, and the boat is capable of carrying out extremely arduous towing tasks and complex manoeuvres in conjunction with the bow thruster, which is an optional accessory. The capacious plastic hull allows the modeller to install numerous auxiliary working systems, and experienced builders will enjoy fitting out the Happy Hunter with a working lighting system, radar, anchor winch, sound system and towing mechanism. It is even possible to install a fully working crane; the crane itself is included in the kit.

Set contents
• Vacuum-moulded white ABS plastic hull and superstructure
• Die-cut parts for deck and superstructure
• Laser-cut parts for power system mountings and electronic component supports
• Complete rudder system
• Injection-moulded Kort nozzles
• Small hardware items
• Components for foremast, mainmast, crane etc.
• Decal sheet
• Building instructions with drawings and photographs
• Boatstand
Specification:
Length approx. 1035 mm
Width approx 235 mm
Total displacement approx. 9500 g
Draught 120 mm
RC functions
Rudder, Motor control, Lighting systems, Auxiliary working systems
?

Essential accessories
Item number
ro1107 Fitting Set Happy Hunter
ro1108 Power Set Happy Hunter
roF4009 F14 Navy 4/8/1 40MHz
67052 ESC WP 860 Dual 1x or 2x
ro108-05 Bow Thruster
667256 Lead batteries 6V / 12Ah 2x
Replacement parts
Item number
ro1465 Dynamic Propp.3-Blade D60R
ro1464 Dynamic Propp.3-Blade D60L
?

A complete list of recommended accessories is included in the technical documentation supplied with the model or under the point "Documents" on this page

DUMAS BOATS_ Carol Moran Tug scale 1:24 RC Modellkit Item no.: ds1272

Including VAT
For EU Market
5580.00 Kn
749.00 €
869.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Carol Moran Tug scale 1/24 RC Modellkit

Coming This Fall........Carol Moran Tug

We are back with a brand new jumbo tug boat. In house we have been referring to this project as Carol Moran XXXL. Taking a look at the picture below of the 18" Carol Moran and it's new big sister will really drive the point home. Simply put it is the biggest tug boat we have ever made.

This 50" model features balsa planking over laser cut poplar plywood frames. The cabin and pilot house are constructed from die-cut and laser cut poplar plywood with expanded pvc sheeting. The kit includes all of the detail pieces such as turned brass stanchions, cast metal parts, several large urethane castings, vacuum formed parts, decals and laser cut detail pieces. A 54 page instruction booklet and 108 corresponding figure drawings walks you step-by-step through construction. And as you would expect from a boat this size, it is a fantastic running model. If you have been thinking you might want to try living large, then you have to take a look at the new Carol Moran.

Length: 1270 mm / 50 inch
Beam: 343 mm / 13.5 inch
Scale: 1:24

Additional parts required to power and radio control the model:
Dumas #2004 6v motor
Electronic Speed Control
7.2v Battery Pack
Two Channel Radio

Use Running Hardware Kit #2379 for the Drive Line System.

Please note some of the running hardware parts are called for early in the construction of the model.

CALDERCRAFT_ Imara Zweischr. Baukasten Item no.: 27012

Including VAT
For EU Market
6698.00 Kn
899.00 €
1043.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Imara 2-Schrauben Antrieb

Hafenschlepper aus der Kolonialzeit
Die Imara war ein sehr typischer Hafenschlepper der Kolonialzeit. Sie wurde für Dar-es-Salaam gebaut und war in der Kriegszeit unter dem Namen „Perserverance" im Dienst der Royal Navy. Sie ist ein typisches Beispiel für die vielen Projekte, die zwischen den beiden Weltkriegen im englischen Schiffbau durchgeführt wurden.
Der Baukasten der Imara ist wie die Marie Felling als Zweischrauben-Antrieb wie das Original oder als Einschrauben-Antrieb zum einfachen Einbau einer Dampfmaschine Puffin, P4 oder Proteus lieferbar. Für die Zweischrauben-Version eignet sich natürlich auch die Dampfmaschine Puffin Maxi Twin hervorragend.
Der Baukasten ist mit einem sorgfältig detaillierten GFK-Rumpf, Aufbauten und Schornstein ausgestattet. Alle Sperrholzteile für Deck und Aufbauten sind mit einer CNC-Fräse exakt ausgefräst. Für Steuerhaus und Deck sind außerdem bedruckte Sperrholzplatten beigefügt. Der Beschlagsatz ist besonders reichhaltig mit ca. 800 Metallgussteilen bis hin zum Geschirr im Salon und Einrichtungsteilen ausgestattet. Die Beiboote sind tiefgezogen und ein ausführlicher Bauplan mit deutscher Bauanleitung erleichtern den Zusammenbau.

Außerdem lieferbar:
Bestell-Nummer 27112 Imara Einschrauben-Antrieb komplett mit Beschlagsatz

Zubehör:
22310 Dampfmaschine Viktor Maxi-Twin für Zweischrauben-Antrieb oder
42265 E-Motor Max Power 900 P

Empfohlene Schiffsschrauben:
544075 MS-Propeller linkslaufend 4-Bl. 75mm M4 Dampfantrieb
544076 MS-Propeller rechtslaufend 4-Bl. 75mm M4 Dampfantrieb

534065 Ms-Propeller linkslaufend 3-Bl. 65mm, M4 E-Antrieb
534066 Ms-Propeller rechtslaufend 3-Bl. 65mm, M4 E-Antrieb

Technische Daten:
Maßstab: 1:32
Länge: 1105 mm
Breite: 292 mm
Verdrängung: ca. 19 kg

CALDERCRAFT_ Resolve Baukasten Item no.: 27024

Including VAT
For EU Market
6996.00 Kn
939.00 €
1089.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Resolve Bausatz von Calder Craft

Ein britischer Ozeanschlepper, der nicht nur durch seine zwei Schornsteine beeindruckt. Der langgezogene elegante Rumpf gibt dem Modell sowohl eine hohe Geschwindigkeit als auch ein ausgewogenes Fahrbild.

Die Resolve ist ein aufwendig ausgestatteter Baukasten mit GFK-Rumpf, Decks und Aufbauten fertig in CNC-Qualität ausgeschnitten. Dies ermöglicht damit deutlich kürzere Bauzeiten, als man bei einem derart detaillierten Modell erwartet.
Für dieses Modell ist eine Dampfmaschine schon beinahe Pflicht. Mit der Victor Maxi Twin ist das Modell sehr gut motorisiert und die Sanftheit der Dampfsteuerung ergibt zusammen mit dem eleganten Riss einen herrlichen Anblick auf dem Wasser.

Der Rumpf ist sehr Detailgetreu ausgeführt und mit allen Nieten und Platten verziert. Der Beschlagsatz überzeugt durch seine Reichhaltigkeit an Metallguss-Teilen und ist komplett mit Ruderanlage und Stevenrohren ausgestattet. Ein ausführlicher Bauplan mit deutscher Bauanleitung und vielen Detailskizzen und Bildern vervollständigen diesen herrlichen
Baukasten.

Antriebsalternativen:
1. Dampfmaschine Victor Maxi Twin Artikel-Nr. 22310
2. Elektromotor MAX Power 900 Artikel-Nr. 42265 (2 Stück)
Empfohlenes Zubehör bei Dampfantrieb:
4-Blatt Messingpropeller Rechts und Links 544065 und 544066
Gastank 22314
Gaskartusche Propan/Butan 60105
Gas-Fülladapter 22316
Dampfmaschinenöl 50 ml 60100

Empfohlenes Zubehör bei Elektroantrieb:
3-Blatt Messingpropeller Rechts und Links 534065 und 534066
Kupplung bestehend aus
2x Kupplungsmittelstück 63500
2x Wellenanschluss 1 /4" Zoll (6,35 mm) 63564
2x Wellenanschluss 4,0 mm 63540
Fahrtregler WP860 Dual 67052
2x Entstörsatz 42128
Technische Daten:
Maßstab: 1:48
Länge über alles: 1170 mm
Breite: 230 mm
Verdrängung: ca. 12 kg

CALDERCRAFT_ Imara Einschr. Baukasten Item no.: 27112

Including VAT
For EU Market
7443.00 Kn
999.00 €
1158.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Imara Ein-Schrauben Antrieb
Hafenschlepper aus der Kolonialzeit

Die Imara war ein sehr typischer Hafenschlepper der Kolonialzeit. Sie wurde für Dar-es-Salaam gebaut und war in der Kriegszeit unter dem Namen „Perserverance“ im Dienst der Royal Navy. Sie ist ein typisches Beispiel für die vielen Projekte, die zwischen den beiden Weltkriegen im englischen Schiffbau durchgeführt wurden.
Der Baukasten der Imara ist wie die Marie Felling als Zweischrauben-Antrieb wie das Original oder als Einschrauben-Antrieb zum einfachen Einbau einer Dampfmaschine Victor lieferbar. Für die Zweischrauben-Version eignet sich natürlich auch die Dampfmaschine Victor Maxi Twin hervorragend.
Der Baukasten ist mit einem sorgfältig detaillierten GFK-Rumpf, Aufbauten und Schornstein ausgestattet. Alle Sperrholzteile für Deck und Aufbauten sind mit einer CNC-Fräse exakt ausgefräst. Für Steuerhaus und Deck sind außerdem bedruckte Sperrholzplatten beigefügt. Der Beschlagsatz ist besonders reichhaltig mit ca. 800 Metallgussteilen bis hin zum Geschirr im Salon und Einrichtungsteilen ausgestattet. Die Beiboote sind tiefgezogen und ein ausführlicher Bauplan mit deutscher Bauanleitung erleichtern den Zusammenbau.

Außerdem lieferbar:
Bestell-Nummer 27012 Imara Zweischrauben-Antrieb komplett mit Beschlagsatz

Zubehör:
22303 Dampfmaschine Viktor horizontal für Einschrauben-Antrieb
42265 E-Motor Max Power 900 P

Technische Daten:
Maßstab: 1:32
Länge: 1105 mm
Breite: 292 mm
Verdrängung: ca. 19 kg

KRICK_ Police Boat WSP47 Construction Kit Item no.: 20360

Including VAT
For EU Market
1155.00 Kn
155.00 €
180.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

The WSP47 is a model-like replica of a typical police boat of the 1990s. This model convinces not only by its pleasing appearance and simple construction, it also enables the realization of the most diverse detail functions. For example, a functional fire extinguishing monitor and a functional radar have already been integrated into the basic modular system, for which only the corresponding pump and the radar drive motor must be purchased as accessories. All other parts for this are already included in the kit with a detailed description. The lamps included in the kit can also be very easily fitted with very small bulbs. Nevertheless, the basic modular system suitable for beginners could be kept at a pleasant price level.

The kit contains the finished deep-drawn ABS plastic hull, shaft with stern tube, coupling and drive motor with cables. For deck and superstructure, all plywood parts are precisely cut out with a laser. All parts for the many fittings are also included in the kit, including the fire extinguishing gun and the rotating radar.
A detailed building instruction and building plan drawings make it possible even for the beginner with some skill to build this versatile model.

A remote control is not included. Any remote control with at least 4 channels is suitable for remote control. In addition to the speed control of the engine by means of a suitable speed controller, the rudder is also controlled by a standard servo. For the special delete monitor function, the pump article no. 65150 and a switching module for remote control of the pump (on/off) are still needed. Other special functions would be the rotating radar - for this you need the gear motor article no. 42203. usually the gear motor is powered by the drive battery and always rotates when the model is switched on. Alternatively, an electronic switch can be installed if the rotating radar is to be switched off via the remote control. As a further special function, a lighting can also be installed which can be optionally operated via the remote control. Then an electronic switch is also required for this function.

Technical data:
Scale 1:20
Hull length 600 mm
Width 205 mm
Height 335 mm

DUMAS BOATS_ US Coast Guard Lifeboat Kit Item no.: ds1203

Including VAT
For EU Market
1453.00 Kn
195.00 €
227.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

US Coast Guard Lifeboat Kit

In 1963 the pleasure boating industry was booming with more new boaters than ever before. Unfortunately business was also booming for the Coast Guard with more boating accidents than ever before. They found their answer in their new 44 ft. self-righting Motor Lifeboat. Powered by twin 180 h.p. diesel engines, the boat could achieve speeds of 15 knots and in tests where it towed a 100 ton 95 foot patrol boat, she proved to be a decent little tug as well.

Kit 1203 is the all wood version which features plank on frame balsa strip construction, with cleanly die-cut parts for construction of the superstructure. 39 cast fittings and a distinctive Coast Guard insignia decal top off this kit. 2335 is an upgraded heavy duty hardware kit for twin power with propellers going in opposite directions. Use two Dumas motors 2004 6V for classic scale realism.

Technical Data
Length 838 mm / 33 inches
Beam 229 mm / 9 inches
Scale 1:16 / 3/4 in. to 1 ft.

Additional parts required for R/C:
Running Hardware: #2335
Power: Two Dumas #2004 6v motors
Speed Control: #2022 6v Speed Control
Battery: #8302 NiCad Battery
Charger: #8315 Battery Charger
Radio Control: #8812-2 2 Channel Radio Control w/ two servos

ROMARIN_ Dolly Harbour Launch Model Boat Kit Item no.: ro1005

Including VAT
For EU Market
514.00 Kn
69.00 €
80.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Radio-controlled semi-scale model of a launch to 1:20 scale

This general-purpose boat type can be seen in many of the world‘s harbours. These small launches can be fitted out for a wide variety of tasks, and are commonly used to transport persons or materials; they can also be used as tugs for larger vessels if fitted with special towing gear, or even as fire-fighting launches.
The electric power system for our model of the Dolly has been carefully selected to suit the vessel, and the single-screw system provides an excellent scale performance. The hull features an integral screw tunnel, giving very good manoeuvrability. The recommended 6 V/1.3 Ah battery gives running times of up to an 3/4 hour.

Crew figures not included.

Set contents
• Ready-made, red-pigmented hull, clear moulded superstructure (no glazing panels to cut out)
and deck (all parts trimmed to shape).
• Full set of laser-cut parts for installing the power and radio control systems
• Complete rudder system, stern tube and propeller shaft, propeller and coupling
• Self-adhesive decals and window masks
• Building instructions with drawings

Specification:
Length approx. 550 mm
Width approx 165 mm
Total displacement approx. 1200 g
Scale 1:20

RC functions
Rudder, Motor control

Essential accessories
Item numbers
--- Remote Control min. 2 channel
ro1006 Fitting Set
79050 Servo for rudder
67052 ESC WP1060
42235 MAX Speed 400 Electric Motor
42128 Suppressor Filter Set
627251 Lead battery 6V / 1,3Ah
Special function accessory
ro1009 Special Function Set Dolly 1x 1009
ro 1434 Towing Gear 1x 1434
79050 Servo 1x or 2x
roF4008 F-14 FM 4/8/1 40 MHz 1x
Replacement parts
Item numbers
ro1481 Boat Rudder+T.Arm 50X36X28 1x
ro1470 Propeller 30mm R 1x
ro1343 Double Cross Bol. 1x
ro1335 Life Ring 25mm 1x
ro1351 Flag Pole 1x
ro1333 Pressure Fan white 1x
ro1643 Navigation Lamp Set 1x
ro1368 Flag Netherlands 1x
42235 MAX Speed 400 1x
A complete list of recommended accessories is included in the technical documentation supplied with the model or under the point "Documents" on this page.

ROMARIN_ Paula work ship Kit Item no.: ro1159

Including VAT
For EU Market
1036.00 Kn
139.00 €
161.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Radio-controlled model of a working ship with salvage crane to 1:25 scale

Fittings set included.

In many harbours of the world you will find examples of the full-size Paula. These industrious vessels are constantly shunting in and out of port to carry out their work in the coastal regions, around the estuaries of large rivers and in the harbour approaches. Manoeuvrable and very fast for their size, these working ships are employed for all manner of tasks. Amongst their duties are retrieving and laying sea warnings and markers, clearing away minor obstacles in shipping lanes and transporting special equipment required for marine research.

This wide-ranging versatility gives the imaginative modeller almost unlimited scope for completing and operating the boat.

The Paula III is the ideal model for the beginner and advanced model builder alike, but is likely to appeal to the traditional modeller who enjoys „real“ construction work. We recommend the use of a lead-acid battery which gives extremely long running times. The salvage crane can lower various loads over the model‘s stern and retrieve them again.
Crew figures and buoy set not included in the kit.
Set contents
• Vacuum-moulded plastic hull and deck
• Vacuum-moulded deck superstructure formed in clear material; windows do not need to be cut out separately
• Die-cut internal hull fittings
• Complete rudder system
• Stern tube, shaft and propeller
• Shaft coupling
• All parts for the salvage crane
• Decal sheet
• Building instructions and plan
• Complete fittings set
Specification:
Length approx. 710 mm
Width approx 215 mm
Total displacement approx. 2500 g
Scale 1:25
RC functions
Rudder, Motor control, Auxiliary working systems
Essential accessories
Item number
--- Remote Control min. 2 channel
79050 Servo for rudder
67051 ESC WP1060
42124 MAX Power 600 Electric Motor
42128 Suppressor Filter Set
Special function accessory
Item number
roF4008 F-14 FM 4/8/1 40 MHz
ro1537 Special-Function Set Kran
ro1539 Buoy Set
79050 Servo
Replacement parts
ro1473 Propeller 35 mm R 1x
A complete list of recommended acces-sories is included in the technical documentation supplied with

KRICK_ Grimmershörn Construction Kit Item no.: 21440

Including VAT
For EU Market
1930.00 Kn
259.00 €
300.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

The Grimmershörn was built in 1956/57 at the Hansa shipyard in Cologne-Deutz. It was stationed in the port of Cuxhaven and was used both as a buoy-laying and pilot-laying boat. A few years ago it was sold to a private person who had the ship completely rebuilt.

Our model was constructed according to shipyard plans and corresponds to the construction of 1957. The model can take a high payload and its fuselage volume makes it ideal for carrying out special functions.
The model kit contains ABS prefabricated parts for hull, deck and bulwark, milled plywood parts for the superstructures, all fittings, shaft with stern tube and rudder set. Electric motor, paint and adhesives are not included in the kit.

Required drive parts
Article No.
42275| MAX Gear Motor 2,5:1
42128| Interference suppression capacitors (set)
WilTec - 63706| Shaft coupling 6 to 4 mm
or
Article No.
42260| MAX Speed 800 Electric Motor
42128| Interference suppression capacitors (set)
WilTec - 63705| Shaft coupling 5 to 4 mm
63924| Engine mount 700

Further required accessories:
Power supply 12V from 5 Ah when using the MAX Gear geared motor
or
Power supply 6V from 10 Ah when using the MAX Speed 800 electric motor
Speed controller min. 30 A Power
Remote control min. 2 channels
Paints, adhesives, cables and connectors
Optional
65302| Anchor windlass for installation below deck

Technical data:
Scale: 1:20
Overall length: 1038 mm
Width: 305 mm
Height: 715 mm
Payload: approx. 8 kg

BILLING BOATS_ Calypso 1:45 RC-Baukasten Item no.: BB0560

Including VAT
For EU Market
2973.00 Kn
399.00 €
463.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Calypso

Vorbildgetreues Modell des Ozeanforschungsschiffes von Jaques Yves Cousteau

Das Original wurde 1942 in den USA als Minensucher gebaut, von Jacques Yves Cousteau 1950 gekauft und nach umfassenden Änderungen und Anpassungen in ein komplett ausgestattetes Ozeanforschungsschiff verwandelt. Die Ausrüstung umfasst unter anderem eine Beobachtungskammer im Steven, eine ovale Taucherglocke, eine Galäzzi-Druckkammer, ein Schlauchboot für Fahrten in flachem Wasser, einen Hubschrauber und eine umfangreiche Unterwasserausrüstung.

Angaben zum Vorbild:
Länge 42 m
Verdrängung 360 t
Geschwindigkeit 12 Knoten.


Baukasten:
Dieser Baukasten ist mit einem tiefgezogenem ABS-Rumpf und lasergeschnittenen Holzteilen ausgestattet. Ruder, Schiffswelle mit Stevenrohr und Schiffsschraube sind für den Antrieb mit Elektromotor vorgesehen. Alle Beschlagteile sind mit Bauplan und Bauanleitung im Lieferumfang enthalten.

Technische Daten:
Maßstab: 1:45
Länge: 940 mm
Breite: 170 mm
Höhe: 330 mm

Benötigte Farben
Artikel-Nr.
|BCA010| Matt Lemon 22 ml Billing Boats
|BCA011| Schwarz 22 ml Billing Boats
|BCA014| Matt weiß 22 ml Billing Boats
|BCA015| Silber 22 ml Billing Boats
|BCA017| Klarlack 22 ml Billing Boats
|BCA020| Satin braun 22 ml Billing Boats
|BCA030| Dark Ad grau 22 ml Billing Boats
|BCA035| Signal rot 22 ml Billing Boats
|BCA036| Mahagoni 22 ml Billing Boats

Als Antriebslösung können folgende Komponenten eingesetzt werden:
42116 2 St. MAX Power 400 Elektromotor
42128 2 St. Entstörsatz kpl.
63920 2 St. Motorträger 400
63701 2 St. Wellenkupplung 2,3 auf 4 mm
667253 1 St. Bleiakku 6V / 3,4Ah

Zusätzliche Ergänzungen siehe Reiter "Weitere Info".

BILLING BOATS_ African Queen 1:12 RC-Baukasten Item no.: BB0588

Including VAT
For EU Market
1259.00 Kn
169.00 €
196.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

African Queen

Die African Queen gab einem Film mit den bekannten Filmstars Katherine Hepburn und Humphrey Bogart seinen Namen. Die Geschichte spielt während des Ersten Weltkriegs, in welcher die African Queen nach einer langen und gefahrvollen Reise die Zuflüsse des Sees hinab, das deutsche Kriegsschiff Königin Luise auf dem Victoriasee in Afrika angreift.

Der Bausatz von Billing Boats enthält neben dem tiefgezogenen Kunststoffrumpf auch die detaillierte Attrappe einer Dampfmaschine mit stehendem Kessel. Als besonderes Highlight wird diese von einem zweiten Elektromotor angetrieben, der die Illusion eines dampfgetriebenen Modells schafft. Versierte Modellbauer perfektionieren den Eindruck noch durch den Einbau unseres Dampfmaschinen-Soundmoduls.

Alle Holzteile sind mit Laser präzise ausgeschnitten. Ein großer Bauplanbogen, Bauanleitung und weitere Abbildungen, sowie alle zum Aufbau benötigten Holz-, Kunststoff- und Beschlagteile sind im Lieferumfang enthalten.

Technische Daten:
Maßstab: 1:12
Länge: 740mm
Breite: 210mm
Höhe: 430mm

Für den Bau und Komplettierung der African Queen benötigen Sie noch weiteres Zubehör, Farben und Klebstoffe. Einige Vorschläge finden Sie im Reiter "Weitere Info"

Benötigtes Zubehör
Fernsteuerung mit min. 2 Kanälen
Standardservo mit langem Servohebel
Antriebsakku 6V
Fahrtregler
Elektromotoren
Kabel und Steckverbindungen

Empfohlene Klebstoffe
Artikel-Nr.
ro5015 Stabilit Express 2-Kompnenten Klebstoff
48515 UHU Holzleim wasserfest
44052 DELUXE Roket Max Cyano 20g
44035 DELUXE RC Modeller Kraftkleber
44048 DELUXE Roket Plastic Klebstoff

Vom Hersteller vorgeschlagene Farben zur Gestaltung des Modells
Artikel-Nr.
BCA001 Weiß 22 ml Billing Boats
BCA004 Orange 22 ml Billing Boats
BCA005 Tan Braun 22 ml Billing Boats
BCA011 Schwarz 22 ml Billing Boats
BCA014 Matt Weiß 22 ml Billing Boats
BCA015 Silber 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA019 Matt Aircraft Blau 22 ml Billing Boats
BCA023 Kupfer 22 ml Billing Boats
BCA030 Dark Ad Grau 22 ml Billing Boats
BCA036 Mahagoni 22 ml Billing Boats

KRICK_ Sirius Construction Kit Item no.: 21460

Including VAT
For EU Market
3122.00 Kn
419.00 €
486.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Crab cutter from Dorum

Sirius is the classic in our range of ship models and has been one of the most popular kits for years. The reason for this is certainly his high loyalty to his role model, which above all We owe it to the owner of the original, who let us carefully photograph and measure the ship down to the smallest detail. The ride of this beautiful beefy cutter is particularly impressive and those who dare to do something special should set about making the nets lowerable.

The construction set of the Sirius is very richly equipped. The spacious hull is deep-drawn from ABS, the deck is planked with precious wood. All superstructures are made of precious wood parts. The poles made of brass tube and the set of fittings with countless small metal parts leave nothing to be desired. Realistic nets and lettering as well as a detailed construction plan with instructions and many detailed sketches facilitate the assembly.

Accessories electric motor

Technical data:
Scale: 1:16
Length: 900 mm
Width: 330 mm
Height: 720 mm

NORDIC CLASS BOATS_ Svea Nordic Fischtrawler 1:15 RC Bausatz Item no.: 24502

Including VAT
For EU Market
2228.00 Kn
299.00 €
347.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

NEUAUFLAGE

Svea Nordic Fischtrawler RC-Bausatz im Maßstab 1:15
Svea ist ein Scalemodell eines kleinen nordischen Fischtrawlers, wie sie oft zum Krabbenfischen verwendet werden. Grundlage für dieses Modell ist das Fischerboot Gullmar aus dem Küstenstädtchen Lysekil an der Westküste, aber diesen Bootstyp kann man in jedem nordischen Hafen in den vielfältigsten Farbkombinationen finden.
Dieser Baukasten wurde bewusst sehr groß dimensioniert, damit man das Modell mit vielen Details wie Körben, Fischen, Netzen , Eimern zum Leben erwecken kann. Der voluminöse Rumpf bietet viel Platz für Sonderfunktionen. Der Kreativität des Modellbauers sind hier keine Grenzen gesetzt.

Der Baukasten für diese große RC-Version des Bootes enthält alle Holzteile mit Laserstrahl ausgeschnitten, Beschlagteile aus Metallguss.
Die Bauanleitung besteht aus zahlreichen Abbildungen die den Bauablauf erläutern und farbigen Gesamtansichten die auch als Vorschlag zur Farbgestaltung dienen. Eine Stückliste in englischer Sprache hilft bei der Zupordung der einzelnen Bauteile.

Technische Daten:
Maßstab 1:15
Länge 1100 mm
Höhe 940 mm
Breite 350 mm

BILLING BOATS_ Nordkap 1:50 RC-Baukasten Item no.: BB0476

Including VAT
For EU Market
1893.00 Kn
254.00 €
295.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Nordkap

Die Nordkap ist ein typischer Nordseetrawler, der 1970 auf einer britischen Werft gebaut wurde. Der Bausatz beruht auf den ursprünglichen Schiffszeichnungen. Mit einer Tonnage von 185 BRT, einer Länge von 40 m und einem 1000 PS Dieselantrieb erreichte die Nordkap 12 bis 14 Knoten Fahrt und konnte mit 7 bis 8 Mann Besatzung in den Gewässern um Island und Grönland Hering und Kabeljau fangen.

Dieser Baukasten ist auf klassischer Spantenbauweise aufgebaut. Alle Holzteile sind mit Laser präzise ausgeschnitten. Ein 1:1 Bauplan, Bauanleitung, sowie alle zum Aufbau benötigten Holz-, Kunststoff- und viele Beschlagteile aus Messing sind im Lieferumfang enthalten.

Technische Daten:
Maßstab: 1:50
Länge: 810 mm
Breite: 190 mm
Höhe: 430 mm


Benötigte Farben
BCA001 Weiß 22 ml
BCA003 Emerald grün 22 ml Billing Boats
BCA005 Tan braun 22 ml Billing Boats
BCA007 Sea blau 22 ml Billing Boats
BCA009 Bright rot 22 ml Billing Boats
BCA011 Schwarz 22 ml Billing Boats
BCA012 Pale grau 22 ml Billing Boats
BCA013 Trainer gelb 22 ml Billing Boats
BCA014 Matt weiß 22 ml Billing Boats
BCA017 Klarlack 22 ml Billing Boats
BCA036 Mahagoni 22 ml Billing Boats

Ersatzpropeller: BF393L

BILLING BOATS_ Boulogne Etaples 1:20 RC-Baukasten Item no.: BB0534

Including VAT
For EU Market
1483.00 Kn
199.00 €
231.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

BOULOGNE ETAPLES überarbeiteter RC-Bausatz von Billing Boats

Die originale Form dieses Bootstyps ist in vielen Häfen entlang der französischen Kanalküste zu sehen. Es sind so genannte Hecktrawler, bei denen das Netz über einen Aufholer am Heck eingeholt wird. Der Rumpf des Originals ist aus Stahl und hat bei einer Länge von nur 11 m 4-5 Mann Besatzung. Dieses Modell ist auf klassischer Spantenbauweise in Holz aufgebaut und für den Einbau einer Fernsteuerung mit min. 2 Kanälen vorgesehen.

Baukasteninhalt:
Alle zum Aufbau benötigten Holz-, Kunststoff- und Beschlagteile sind im Lieferumfang enthalten. Ein Bauplan im Maßstab 1:1 und eine bebilderte Bauanleitung vervollständigen den Bausatz von Billing Boats.

Technische Daten
Maßstab 1:20
Länge 560 mm
Breite 200 mm
Höhe 390 mm

Für die Motorisierung empfehlen wir folgendes Zubehör:
42242 MAX Power 450 Elektromotor
42128 Entstörkondensatoren (Satz)
63920 Motorträger verstellbar
63800 Stegkupplung Verbinder (1 Stck.)
63823 Welleneinsatz f. Stegkupplung 2,3 mm
63830 Welleneinsatz f. Stegkupplung 3 mm
79054 Servo für Ruderfunktion
67051 Elekronischer Fahrtregler WP-1060
- Fahrakku 6 - 7,2V

Weitere Modelle dieser Serie:
BB0472 Mary Ann 1:33
BB0474 Cux 87 1:33
BB0476 Nordkap 1:50
BB0526 Andrea Gail 1:30

NORDIC CLASS BOATS_ Bohuslän Dampfschiff 1:45 Bausatz Item no.: 24506

Including VAT
For EU Market
2228.00 Kn
299.00 €
347.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Neuauflage! Ab sofort inklusive LED Beleuchtungssatz

BOHUSLÄN

Schwedischer Passagierdampfer aus dem Jahre 1913

Das Dampfschiff s/s Bohuslän wurde in der Eriksbergs Warf in Gothenburg 1913 erbaut. Über mehr als 40 Jahre befuhr sie die Route Göteborg-Lysekil-Smögen-Gravarne (Kungshamn) an der schwedischen Westküste. 1963 wurde sie stillgelegt, aber heute hat ein Verein von Enthusiasten dieses Schiff in seinen Originalzustand versetzt und restauriert. Im Sommer ist sie wieder für Ausflugsfahrten in Dienst.

Der Baukasten ist sehr detailliert bis hin zur Inneneinrichtung mit vielen Laserteilen produziert. Wie die Mariefred kann das Modell zum Fahrmodell umgebaut werden, allerdings sind in dem Bausatz keinerlei Angaben hierüber enthalten. Die Bauanleitung besteht aus Baustufenabbildungen, Stückliste (Zur Zeit nur in englischer Sprache) und farbigen Abbildungen als Vorschlag zur Farbgebung.

Zusätzlich ist ab sofort ein LED-Beleuchtungsset im Bausatz enthalten.

Technische Daten:
Maßstab 1:45
Länge 950 mm
Höhe 400 mm
Breite 160 mm

CALDERCRAFT_ North Light Baukasten Item no.: 27001

Including VAT
For EU Market
3494.00 Kn
469.00 €
544.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Clyde Puffer

Die Northlight ist das Modell eines sehr typischen kleinen Küstenfrachters vor den westlichen Inseln Schottlands, bei allen Schiffsliebhabern unter dem Namen "Clyde Puffer" bekannt. Der GFK-Rumpf dieses Modells ist mit allen Details auf der Außenseite ausgestattet, wie Nieten, Stoßleisten und Speigatts. Die Holzteile für Deck und Aufbauten sind mit einer CNC-Fräse passgenau ausgefräst. Der Baukasten enthält alle notwendigen Formteile, bedruckte Decks, Bauplan und Bauanleitung mit vielen Detailskizzen.
Der Beschlagsatz enthält über 200 Metallgussteile, die dieses Modell erst zu einem authentischen Schmuckstück machen.
Dieses Modell ist auch sehr gut als reines Standmodell geeignet. Die Figuren der Mannschaft sind ebenfalls enthalten. Der Einbau einer Dampfmaschine in dieses kleine Modell erweist sich als sehr schwierig.

Zubehör
Artikel-Nr.
42124 E-Motor MAX Power 600 bei 6 Volt

Empfohlene Ergänzung
Artikel-Nr.
534041 Messingschiffsschraube 3-Blatt 40mm Ø
Besserer Wirkungsgrad und höhere Belastbarkeit zeichnen diesen Propeller, gegenüber den Gußpropeller aus dem Bausatz, aus.

Technische Daten:
Maßstab: 1:32
Länge: 660 mm
Breite: 203 mm

DUMAS BOATS_ Great Lakes Freighter Kit Item no.: ds1264

Including VAT
For EU Market
1974.00 Kn
265.00 €
307.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Great Lakes Freighter Kit

Over the years one the most requested models for us to develop has been a freighter. So by popular demand we present our Great Lakes Freighter.

Modeled after a 350' bulk carrier, our 1/96th semi-scale model of a Great Lakes Style Freighter make a beautiful representation of the famous freighters.

The hull and superstructure is constructed of highly conformable die cut expanded PVC over die cut plywood frames. There are detail parts galore including laser cut and cast parts, vacuum form life boats and stacks, decals and flag and more. Add to that the step-by-step building instructions and you are on your way to constructing your own miniature freight moving business.

Technical Data
Length 1168 mm / 46 inches
Beam 152 mm / 6 inches
Scale: 1:96 (1/8" = 1.0')

Additional parts required for R/C:
ds2374 Running Hardware Kit
Max Power 600 Electricmotor
Electric Speed Control
7.2 Volt Battery
Battery Charger
Radio Control 2 Channel with servos

DUMAS BOATS_ The George W. Washburn Kit Item no.: ds1260

Including VAT
For EU Market
1751.00 Kn
235.00 €
273.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

The George W. Washburn Kit

The George W. Washburn was launched by the Cornell Steamboat Company to move barges and cargo like stones, sand, and bricks up and down the Hudson River between Albany and New York City. She was, during her early years, considered the fastest tug on the Hudson. Since she took on paying passengers, her appearance was kept up. It was said that a Cornell Steamboat could be notices from great distances by the yellow and black color of the smoke stacks. Sad to say, however, that the George W Washburn and Cornell Steamboat Company are no longer around today. This kit features laser-cut plank-on-frame construction.

Features
Laser cut plank on frame construction, Die cut decks and cabin parts. Balsa planked hull. Metal deck fittings. Full color decals and flags
The Kit is including all wood to build the kit, rigging thread, deck fittings, molded plastic parts, decals, flags. plans and instructions

Technical Data
Length 762 mm / 30 inch
Beam 140 mm / 5-1/2 inch
Scale 1:48

Additional parts required for R/C:
Running Hardware Kit
Motor MAX Power 600
Electronic Speed Control WP1060
7.2 Volt NiCad Battery
Battery Charger
Radio Control min. 2 Channel with servo

DUMAS BOATS_ City of Buffalo Lake Steamer RC Kit Item no.: ds1270

Including VAT
For EU Market
2496.00 Kn
335.00 €
389.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

City of Buffalo Lake Steamer RC Kit

The City of Buffalo is a beautiful example of the Steamboats that flourished on the resort lakes of the north eastern United States in the late 1800's and early 1900's. Designed by Capt. J.W. Pierce, she was built in Jamestown New York, and launched in 1890 on Chautauqua Lake in New York. One of 13 large (125') steamboats built entirely of wood and sheathed in steel, she served the region from 1890-1929. Unfortunately like so many of her sisters she was destroyed by fire in 1929

This 1/48th scale model of The City of Buffalo balsa is planked over laser cut lite ply frames and uses a combination of balsa, poplar plywood, and expanded PVC. The kit is beautifully detailed with cast metal pieces, laser cut components, flags, decals and much more. The construction documentation includes full size plans, a 57 page instruction booklet and a 30 page figure packet with 70 individual figure drawings.

Length: 33 inches / 838 mm
Beam: 7.75 inches / 197 mm
Scale: 1/48th / 1:48

Additional parts required to power and radio control the model:
Power: Motor MAX Power 600
Battery: 7,2 V
Two Channel Radio

Use Running Hardware Kit ds2377 for the Drive Line System. Please note some of the running hardware parts are called for early in the construction of the model.

DUMAS BOATS_ Myrtle Corey Kit Item no.: ds1253

Including VAT
For EU Market
2675.00 Kn
359.00 €
416.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Myrtle Corey Kit

The Myrtle Corey is a fine example of a late 1800's river towboat. Typical of the day, these boats were site built, without plans, with lots of substitutions and jury rigged construction. Once commonplace along the waters of the Mississippi and Arkansas rivers, the Dumas model of the Myrtle Corey is designed to bring that amazing era back to life. This kit features vacuum formed hull and roofs. The substructure is made from diecut expanded pvc and there is a load of stripwood to provide the boat with it's characteristic planked deck and cabin sides.

Everything in this kit is designed for detail and realism. We include: castings, wood turnings, laser cut parts and so much more. Even the paddlewheel and rudder hardware is included. Add a motor and your electronics and you're ready to go. So if you have been thinking about trying your hand at something a little different, take a look at the Myrtle Corey.

Length: 38"
Beam: 8 1/4"
Scale: 1/20th

NORDIC CLASS BOATS_ Mariefred s/s Passagierdampfer Bausatz Item no.: 24504

Including VAT
For EU Market
2079.00 Kn
279.00 €
324.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

NEUAUFLAGE!

MARIEFRED S/S
Schwedischer Passagierdampfer aus dem Jahr 1903

Das Dampfschiff Mariefred wurde 1903 auf der Linie Stockholm-Enhörna-Mariefred in den Verkehr genommen. Auf dieser Linie verkehrt es seitdem unter gleichem Namen, mit wenigen Veränderungen an Bord und mit der gleichen Dampfmaschine. Sie ist eines der wenigen noch aktiv betriebenen Dampfschiffe in Schweden und wird stets als Erinnerung weiter restauriert und gewartet.
Der Baukasten der Mariefred ist grundsätzlich als Standmodell mit lasergeschnittenen Kiel und Spanten ausgestattet. Das Modell kann aber auch recht gut ferngesteuert werden. Alle Beschlagteile sind aus Metallguss und Messing gefertigt. Eine Bauanleitung mit einzelnen Perspektivskizzen erläutert den Zusammenbau.

Technische Daten:
Länge 930 mm
Höhe 320 mm
Breite 160 mm

Bauanleitung zur Zeit nur in englischer Sprache verfügbar.

DUMAS BOATS_ Creole Queen Kit Item no.: ds1222

Including VAT
For EU Market
3569.00 Kn
479.00 €
556.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Creole Queen Kit

Looks can be deceiving, which is certainly the case with the Creole Queen. When you study the Creole Queen you could easily place her in the days of Mark Twain, wheeling down the Mississippi as onlookers sit fishing off the bank. In actuality, the Creole Queen was built in 1983 for the 1984 New Orleans World Fair. The fact that the Queen looks so authentic is no accident.

Even though she is powered by a powerful diesel electric propulsion system, the builders at Halter Marine took every precaution to make sure the Creole Queen had the look of the 1800s. The Dumas model of the Creole Queen is constructed of precision die-cut birch and mahogany plywood. The detail package included in the kit is immense. It has stampings, wood turnings, castings, plastic parts, and a 3 page decal set. For the more adventurous, the size of the Creole Queen leaves the door wide open for those modelers wishing to try less conventional powering methods. Live steam would certainly be a possible option. So if you have always dreamed of building your own working stern wheeler, the Dumas Creole Queen is for you.

Requirements: *reduced gear head motor that supplies the perfect speed to the paddle wheel

Tecnical Data
Length 48 inches / 1200 mm
Beam 10 inches / 254 mm
Scale 1/4 in. to 1 ft. / 1:48

Additional parts required for R/C:
Running Hardware: ds2349 Includes Paddle Wheel Motor
Speed Control: #67052 12V Speed Control
Battery: 2x 6V 3A Lead Battery
Charger: Charger for Lead Batteries
Radio Control: 2 Channel Radio Control w/ two servos

MANTUA MODEL_ Titanic Rumpfbaukasten Kit 1 Item no.: 800725

Including VAT
For EU Market
2004.00 Kn
269.00 €
312.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

R.M.S TITANIC

Über die tragische Geschichte der Titanic gibt es nicht viele Worte zu verlieren. Zahlreiche Bücher und Filme haben alle Details von der Kiellegung im März 1909 bis zu dem tragischen Untergang bei der Jungfernfahrt am 15. April 1912, bei dem 1523 Menschen ums Leben kamen, bereits dargelegt. Der Mythos dieses imposanten Schiffes ist bis heute geblieben und animiert auch immer wieder die Modellbauer, sich an ein derartig großes Projekt zu wagen.

Der Baukasten der Titanic ist ein Großprojekt für anspruchsvolle Modellbauer, die auch gerne eine längere Bauzeit auf sich nehmen und einzelne Bauabschnitte als eigenständige Projekte betrachten können. Um den finanziellen Rahmen dieses Bausatzes überschaubar zu halten ist der Baukasten in 5 Teilbausätze aufgeteilt, die Schritt für Schritt einzeln erworben werden können.

Der Rumpf der Titanic ist aus lasergeschnittenen Sperrholzkiel und -spanten gefertigt und wird mit Leisten in traditioneller Weise hergestellt. Die Beplankung ist einfach ausgeführt, wird aber dann noch mit dünnen lasergravierten Holzplatten belegt, die die vielen Bullaugen und sonstige Details vorgraviert haben. Die Lasergravurtechnik hat dem Schiffsmodellbau gerade hier eine eindrucksvolle neue Dimension ermöglicht, die mit anderen Herstellungstechniken bisher in ihrer Präzision nicht erzielbar war. Auch die Aufbauten mit allen Fensterrahmen und Türen wurden in dieser aufwändigen Technik hergestellt. Eine ausführlich bebilderte Bauanleitung erklärt jeden einzelnen Schritt und Baupläne sowie Detailskizzen zeigen eindeutig wo welche Verzierungen und Details anzubringen sind.

Artikel-Nr.:
800725 Titanic Rumpfbaukasten
800726 Titanic Antriebsset mit 2 Elektromotoren, Umlenkungen und RC-Vorbereitungen
800727 Titanic Dekorationen des Rumpfes und des Vorder- und Achterdecks
800728 Titanic Mittelaufbau mit allen Dekorationen
800729 Titanic Beschlagsatz mit allen Details auf den Decks


Technische Daten:
Maßstab: 1:200
Länge: 1350 mm
Breite: 150 mm
Höhe: 350 mm

MANTUA MODEL_ Titanic Motorsatz Kit 2 Item no.: 800726

Including VAT
For EU Market
887.00 Kn
119.00 €
138.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

R.M.S TITANIC Antriebsset

Antriebsset mit 2 Elektromotoren, Umlenkungen und RC-Vorbereitungen. Sollte das Modell nur als Standmodell gewünscht sein, kann man diesen Schritt überspringen und den Antriebssatz weglassen.

Über die tragische Geschichte der Titanic gibt es nicht viele Worte zu verlieren. Zahlreiche Bücher und Filme haben alle Details von der Kiellegung im März 1909 bis zu dem tragischen Untergang bei der Jungfernfahrt am 15. April 1910, bei dem 1523 Menschen ums Leben kamen, bereits dargelegt. Der Mythos dieses imposanten Schiffes ist bis heute geblieben und animiert auch immer wieder die Modellbauer, sich an ein derartig großes Projekt zu wagen.

Der Baukasten der Titanic ist ein Großprojekt für anspruchsvolle Modellbauer, die auch gerne eine längere Bauzeit auf sich nehmen und einzelne Bauabschnitte als eigenständige Projekte betrachten können. Um den finanziellen Rahmen dieses Bausatzes überschaubar zu halten ist der Baukasten in 5 Teilbausätze aufgeteilt, die Schritt für Schritt einzeln erworben werden können.

Der Rumpf der Titanic ist aus lasergeschnittenen Sperrholzkiel und -spanten gefertigt und wird mit Leisten in traditioneller Weise hergestellt. Die Beplankung ist einfach ausgeführt, wird aber dann noch mit dünnen lasergravierten Holzplatten belegt, die die vielen Bullaugen und sonstige Details vorgraviert haben. Die Lasergravurtechnik hat dem Schiffsmodellbau gerade hier eine eindrucksvolle neue Dimension ermöglicht, die mit anderen Herstellungstechniken bisher in ihrer Präzision nicht erzielbar war. Auch die Aufbauten mit allen Fensterrahmen und Türen wurden in dieser aufwändigen Technik hergestellt. Eine ausführlich bebilderte Bauanleitung erklärt jeden einzelnen Schritt und Baupläne sowie Detailskizzen zeigen eindeutig wo welche Verzierungen und Details anzubringen sind.

Artikel-Nr.:
800725 Titanic Rumpfbaukasten
800726 Titanic Antriebsset mit 2 Elektromotoren, Umlenkungen und RC-Vorbereitungen
800727 Titanic Dekorationen des Rumpfes und des Vorder- und Achterdecks
800728 Titanic Mittelaufbau mit allen Dekorationen
800729 Titanic Beschlagsatz mit allen Details auf den Decks


Technische Daten:
Maßstab: 1:200
Länge: 1350 mm
Breite: 140 mm
Höhe: 350 mm

MANTA MODEL_ Titanic Vor-Achterdeck Kit 3 Item no.: 800727

Including VAT
For EU Market
1036.00 Kn
139.00 €
161.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

R.M.S TITANIC Kit 3

Dekorationen des Rumpfes und des Vorder- und Achterdecks.

Über die tragische Geschichte der Titanic gibt es nicht viel Worte zu verlieren. Zahlreiche Bücher und Filme haben alle Details von der Kiellegung im März 1909 bis zu dem tragischen Untergang bei der Jungfernfahrt am 15. April 1910, bei dem 1523 Menschen ums Leben kamen, bereits dargelegt. Der Mythos dieses imposanten Schiffes ist bis heute geblieben und animiert auch immer wieder die Modellbauer, sich an ein derartig großes Projekt zu wagen.

Der Baukasten der Titanic ist ein Großprojekt für anspruchsvolle Modellbauer, die auch gerne eine längere Bauzeit auf sich nehmen und einzelne Bauabschnitte als eigenständige Projekte betrachten können. Um den finanziellen Rahmen dieses Bausatzes überschaubar zu halten ist der Baukasten in 5 Teilbausätze aufgeteilt, die Schritt für Schritt einzeln erworben werden können.

Der Rumpf der Titanic ist aus lasergeschnittenen Sperrholzkiel und -spanten gefertigt und wird mit Leisten in traditioneller Weise hergestellt. Die Beplankung ist einfach ausgeführt, wird aber dann noch mit dünnen lasergravierten Holzplatten belegt, die die vielen Bullaugen und sonstige Details vorgraviert haben. Die Lasergravurtechnik hat dem Schiffsmodellbau gerade hier eine eindrucksvolle neue Dimension ermöglicht, die mit anderen Herstellungstechniken bisher in ihrer Präzision nicht erzielbar war. Auch die Aufbauten mit allen Fensterrahmen und Türen wurden in dieser aufwändigen Technik hergestellt. Eine ausführlich bebilderte Bauanleitung erklärt jeden einzelnen Schritt und Baupläne sowie Detailskizzen zeigen eindeutig wo welche Verzierungen und Details anzubringen sind.

Artikel-Nr.:
800725 Titanic Rumpfbaukasten
800726 Titanic Antriebsset mit 2 Elektromotoren, Umlenkungen und RC-Vorbereitungen
800727 Titanic Dekorationen des Rumpfes und des Vorder- und Achterdecks
800728 Titanic Mittelaufbau mit allen Dekorationen
800729 Titanic Beschlagsatz mit allen Details auf den Decks

Technische Daten:
Maßstab: 1:200
Länge: 1350 mm
Breite: 140 mm
Höhe: 350 mm

MANTUA MODEL_ Titanic Oberdecks Kit 4 Item no.: 800728

Including VAT
For EU Market
2422.00 Kn
325.00 €
377.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

R.M.S TITANIC Kit 4

Mittelaufbau mit allen Dekorationen.

Über die tragische Geschichte der Titanic gibt es nicht viele Worte zu verlieren. Zahlreiche Bücher und Filme haben alle Details von der Kiellegung im März 1909 bis zu dem tragischen Untergang bei der Jungfernfahrt am 15. April 1910, bei dem 1523 Menschen ums Leben kamen, bereits dargelegt. Der Mythos dieses imposanten Schiffes ist bis heute geblieben und animiert auch immer wieder die Modellbauer, sich an ein derartig großes Projekt zu wagen.

Der Baukasten der Titanic ist ein Großprojekt für anspruchsvolle Modellbauer, die auch gerne eine längere Bauzeit auf sich nehmen und einzelne Bauabschnitte als eigenständige Projekte betrachten können. Um den finanziellen Rahmen dieses Bausatzes überschaubar zu halten ist der Baukasten in 5 Teilbausätze aufgeteilt, die Schritt für Schritt einzeln erworben werden können.

Der Rumpf der Titanic ist aus lasergeschnittenen Sperrholzkiel und -spanten gefertigt und wird mit Leisten in traditioneller Weise hergestellt. Die Beplankung ist einfach ausgeführt, wird aber dann noch mit dünnen lasergravierten Holzplatten belegt, die die vielen Bullaugen und sonstige Details vorgraviert haben. Die Lasergravurtechnik hat dem Schiffsmodellbau gerade hier eine eindrucksvolle neue Dimension ermöglicht, die mit anderen Herstellungstechniken bisher in ihrer Präzision nicht erzielbar war. Auch die Aufbauten mit allen Fensterrahmen und Türen wurden in dieser aufwändigen Technik hergestellt. Eine ausführlich bebilderte Bauanleitung erklärt jeden einzelnen Schritt und Baupläne sowie Detailskizzen zeigen eindeutig wo welche Verzierungen und Details anzubringen sind.

Artikel-Nr.:
800725 Titanic Rumpfbaukasten
800726 Titanic Antriebsset mit 2 Elektromotoren, Umlenkungen und RC-Vorbereitungen
800727 Titanic Dekorationen des Rumpfes und des Vorder- und Achterdecks
800728 Titanic Mittelaufbau mit allen Dekorationen
800729 Titanic Beschlagsatz mit allen Details auf den Decks

Technische Daten:
Maßstab: 1:200
Länge: 1350 mm
Breite: 140 mm
Höhe: 350 mm

MANTUA MODEL _ Titanic Deckdetails Kit 5 Item no.: 800729

Including VAT
For EU Market
991.00 Kn
133.00 €
154.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

R.M.S TITANIC Kit 5

Beschlagsatz mit allen Details auf den Decks.

Über die tragische Geschichte der Titanic gibt es nicht viele Worte zu verlieren. Zahlreiche Bücher und Filme haben alle Details von der Kiellegung im März 1909 bis zu dem tragischen Untergang bei der Jungfernfahrt am 15. April 1910, bei dem 1523 Menschen ums Leben kamen, bereits dargelegt. Der Mythos dieses imposanten Schiffes ist bis heute geblieben und animiert auch immer wieder die Modellbauer, sich an ein derartig großes Projekt zu wagen.

Der Baukasten der Titanic ist ein Großprojekt für anspruchsvolle Modellbauer, die auch gerne eine längere Bauzeit auf sich nehmen und einzelne Bauabschnitte als eigenständige Projekte betrachten können. Um den finanziellen Rahmen dieses Bausatzes überschaubar zu halten ist der Baukasten in 5 Teilbausätze aufgeteilt, die Schritt für Schritt einzeln erworben werden können.

Der Rumpf der Titanic ist aus lasergeschnittenen Sperrholzkiel und -spanten gefertigt und wird mit Leisten in traditioneller Weise hergestellt. Die Beplankung ist einfach ausgeführt, wird aber dann noch mit dünnen lasergravierten Holzplatten belegt, die die vielen Bullaugen und sonstige Details vorgraviert haben. Die Lasergravurtechnik hat dem Schiffsmodellbau gerade hier eine eindrucksvolle neue Dimension ermöglicht, die mit anderen Herstellungstechniken bisher in ihrer Präzision nicht erzielbar war. Auch die Aufbauten mit allen Fensterrahmen und Türen wurden in dieser aufwändigen Technik hergestellt. Eine ausführlich bebilderte Bauanleitung erklärt jeden einzelnen Schritt und Baupläne sowie Detailskizzen zeigen eindeutig wo welche Verzierungen und Details anzubringen sind.

Artikel-Nr.:
800725 Titanic Rumpfbaukasten
800726 Titanic Antriebsset mit 2 Elektromotoren, Umlenkungen und RC-Vorbereitungen
800727 Titanic Dekorationen des Rumpfes und des Vorder- und Achterdecks
800728 Titanic Mittelaufbau mit allen Dekorationen
800729 Titanic Beschlagsatz mit allen Details auf den Decks

Technische Daten:
Maßstab: 1:200
Länge: 1350 mm
Breite: 140 mm
Höhe: 350 mm

MANTUA MODEL_ Motobattello aus Venedig Baukasten Item no.: 800730

Including VAT
For EU Market
2347.00 Kn
315.00 €
365.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Bausatz Motobattello aus Venedig

Wer die Stadt Venedig schon einmal besucht hat, kennt diese Schiffs-Omnibusse sehr genau und ist möglicherweise auch schon darauf mitgefahren. Denn diese sogenannten "Motobattellos" fahren alle großen Kanäle ständig auf und ab. Der Baukasten ist im Maßstab 1:28 relativ groß gehalten, damit Fernsteuerung und Antrieb Problemlos untergebracht werden können. Der Rumpf ist aus Kiel, Spanten und Leistenbeplankung aufgebaut. Alle Holzteile sind präzise mit Laserstrahl ausgeschnitten. Welle, Stevenrohr und Ruderanlage liegen aus funktionsfähigen Messingteilen bei. Die Beschlagteile sind vorwiegend aus Metallguß gefertigt. Auch ein Dekorbogen mit der korrekten Beschriftung an Bord ist enthalten. Der Bauplan und die Bauanleitung geben auch Hinweise auf die Ausstattung als Funktionsmodell.

Zubehör:
800601 Motorisierungssatz mit E-Motor, Kupplung, Ansteuerung

Technische Daten:
Maßstab 1:28
Länge 830 mm
Breite 180 mm
Höhe 180 mm

KRICK_ Submarine Type VII Basic Construction Kit Item no.: 20310

Including VAT
For EU Market
1334.00 Kn
179.00 €
208.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Submarine Type VII Kit

optionally as a stand model or in combination with the diving set as a functional model.

The Type VII was probably the best-known submarine worldwide, since more than 1000 units were built in different versions. This type is characterised by its particularly harmonious line shape, which resembles even more a ship than that of more modern submarines.

This model of the submarine type VII b is in its basic configuration a construction kit with all deep-drawn parts made of high-quality ABS plastic, which are required to build a pure standing model.

Who wants to make the model drivable and submersible needs the drive and diving kit. However, larger depth rudders must be used than the true-to-scale of the stand-mounted model. Subsequent conversion from a floor model to a submersible model is not possible.

The hull of the VII b submarine consists of two ABS half-shells, the submersible tank, ballast tank and the deck, which is deep-drawn from thin material, so that all slots and openings are clearly visible.
The tower structure is also composed of several deep-drawn ABS parts.

All fitting parts as well as the two cannons are included in the basic construction kit.
The technique: The diving process of this model is semi-dynamic, which means that a pump and a flood tank are included in the diving set, which however only supports dynamic (speed-supported) diving.

In addition, it is also required for expansion as a functional model:
20311| Drive and immersion set
Two NiMH batteries 6 V min. 2000 mAh (connected in series)
Remote control min. 4 channels with power supply for the transmitter
Receiver min 4 channels, one electronic speed controller each for the drive and for the pump of the flood tank
One servo each for the depth and rudder functions
Cables and connectors for wiring
Adhesives, paints

Technical data:
Scale: 1:60
Length: 1120 mm
Width: 125 mm
Height: 170 mm

DUMAS BOATS_ U.S.S. Bluefish Kit Item no.: ds1245

Including VAT
For EU Market
2004.00 Kn
269.00 €
312.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

U.S.S. Bluefish Kit

Dive, Dive, Dive you are in the hunt deep in enemy water. Constantly checking your sonar screen, it is an international game of cat and mouse. All of a sudden your are rocked by a depth charge. After a brief black out, power is restored and you are diving using all your naval instincts to survive and complete this mission. You need to get them before they get you! Experience submarine excitement with the USS Bluefish (SS 222). This 33 in. long model of a Gato/Balao class sbumarine has a beam of 4 in. and weighs approximately five pounds ready to run. This dynamic diving sub is recommended for pool use only and has a maximum diving depth of four feet depending on water conditions. The kit contains vacuum formed parts including hull, deck, motor mounts and sails, two 4.8 volt electric motors and complete drive line hardware.

Length 33 inches
Beam 4 inches
Power Two 4.8v motors (included)
Running Hardware Dual shaft hardware (included)

DUMAS BOATS_ Akula Submarine Kit Item no.: ds1246

Including VAT
For EU Market
1601.00 Kn
215.00 €
249.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

The Akula is a an easy to assemble sport scale model of a Russian nuclear attack sub. Each kit includes all the necessary running hardware for its single screw drive line. Simply supply a Dumas 2004 6v motor, an electronic speed control, a 7.2v battery pack, and your three channel radio, and you are good to go. Designed for pool use, the Akula contains all the molded plastic parts to bring the model to life. The enhanced building manual will walk you step by step through the successful completion of you model. So dive into the fun with newest Dumas submarine the Akula.

Kit No. ds1246
Length: 834 mm / 33 inches
Beam: 102 mm / 4 inches
Scale: 1/128th approx.

Additional parts required for R/C

42124 Max Power 600 Motor
7.2V NiMh Battery
67051 Electronic Speed Control
Cuppling, motormount, glue,
Charger
Minimum 3-Channel Radio

Recommended for pool use only. Dive depth will vary with water conditions.

 
 
Credit and Debit Cards:
 
 

 

 

 


 
PayPal Account:
PayPal Account:
marisstellamarisstella@gmail.com