English Hrvatski Italian
We deliver worldwide !
tel: +385 (0)21/544-412 | E-mail

STEAM ENGINES FOR MODEL SHIPS

 

KRICK_ Steamengine Anna Version 2 with Boiler Item no.: 20215

Including VAT
For EU Market
2898.00 Kn
389.00 €
451.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

New Edition! Now available again.

This single-cylinder steam engine was developed mainly as a propulsion for our steamship Anna. With its compact design and stagnant boiler, the steam engine is a real eye-catcher and a technical highlight for the small steamboat. Of course, the machine is also suitable as a drive other model boats with about 50 cm in length or displacement of 1-2 kg.

The steam engine is delivered completely pre-assembled. The boiler is ready soldered, pressure tested and painted. The steam line is already installed. The operation was deliberately kept very simple. Fill water into the boiler, heat up and start the machine on the flywheel. About the small handwheel still the amount of steam can be adjusted and off you go. Esbit tablets are used as fuel.

Including the delivery
Steam engine with boiler mounted on the floor panel
Fire bowl with handle
Evaporating pipe with union nut
Steam oil
Syringe for filling in the water
Manual

Technical specifications
Dimension base plate approx. 135x70 mm
Total height about 170 mm
Total length about 182 mm
Height steam engine about 83 mm
Wide steam engine about 54 mm
Weight empty approx. 600 g
Diameter output shaft 4 mm
Height of output shaft measured about 15 mm from the bottom plate

Necessary accessories
Article no.
60106 Esbit tablets
492368 Super smooth running oil with anti-drip valve
- Distilled water

As optional accessories the following parts are available:
Article no.
22063 exhaust steam condenser
22061 insulating plate
22062 driving clutch

KRICK_ Alex Steam Machine Vertical Boiler Item no.: 22300

Including VAT
For EU Market
6698.00 Kn
899.00 €
1043.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

These oscillating steam engines are the result of many years of experience in model ship construction with steam engine drives. This experience has enabled us to find the ideal combination of original optics, absolute reliability, high power yield and maximum safety. This resulted in this steam engine series after several improvement runs and many practical tests. A modern CNC production in Germany gives us the security for real quality, which nevertheless withstands the price of the few competition from low-wage countries and probably surpasses these in performance and security by far. The Alex steam engine is the slim version for smaller and narrower types of ships. It is available as a vertical or horizontal boiler variant and easily drives ship models weighing up to approx. 10 kg.

The machines and boiler plants are completely assembled and painted, which helps to deliver the plants carefully checked and adjusted. The scope of supply includes the machine with adjustable oiler and reversing valve for forward/reverse and speed, the boiler with safety valve, water level indicator, manometer and steam shut-off valve, the chimney with exhaust pipe, the gas burner with line and the exhaust steam condenser as well as the cladding strips for the boiler cladding and all connecting lines.

Available in two versions
Order no.
22300 Steam Engine Alex vertical with vertical boiler and exhaust steam condenser
22301 Steam Engine Alex horizontal with horizontal boiler and exhaust steam condenser

Necessary accessories:
Order no.
22313 Gas tank
60105 Gas cartridge propane/butane
22316 Gas filling adapter

Useful accessories
Order no.
60100 Steam engine oil

Technical Specifications
drilling 10 mm
Stroke 14 mm
Length of base plate 180 mm
Total width 90 mm
Boiler- 70 mm
Boiler height 130 mm
total height 250 mm
Weight 1580 g
Shaft- 4 mm
Shaft height 12mm

KRICK_ Alex Steam Machine Horizontal Boiler Item no.: 22301

Including VAT
For EU Market
6698.00 Kn
899.00 €
1043.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

These oscillating steam engines are the result of many years of experience in model ship construction with steam engine drives. This experience has enabled us to find the ideal combination of original optics, absolute reliability, high power yield and maximum safety. This resulted in this steam engine series after several improvement runs and many practical tests. A modern CNC production in Germany gives us the security for real quality, which nevertheless withstands the price of the few competition from low-wage countries and probably surpasses these in performance and security by far. The Alex steam engine is the slim version for smaller and narrower types of ships. It is available as a vertical or horizontal boiler variant and easily drives ship models weighing up to approx. 10 kg.

The machines and boiler plants are completely assembled and painted, which helps to deliver the plants carefully checked and adjusted. The scope of supply includes the machine with adjustable oiler and reversing valve for forward/reverse and speed, the boiler with safety valve, water level indicator, manometer and steam shut-off valve, the chimney with exhaust pipe, the gas burner with line and the exhaust steam condenser as well as the cladding strips for the boiler cladding and all connecting lines.

Available in two versions
Order no.
22300 Steam Engine Alex vertical with vertical boiler and exhaust steam condenser
22301 Steam Engine Alex horizontal with horizontal boiler and exhaust steam condenser

Necessary accessories:
Order no.
22313 Gas tank
60105 Gas cartridge propane/butane
22316 Gas filling adapter
Useful accessories
Order no.
60100 Steam engine oil

Technical Specifications
Technical data Alex horizontal
Base plate length 260 mm
Total width 102 mm
Boiler- 70 mm
Boiler height 110 mm
Overall height 190 mm
Weight 1580 g
Shaft- 4 mm
Shaft height 12 mm

KRICK_ Victor Steam Engine Vertical Boiler Item no.: 22302

Including VAT
For EU Market
8933.00 Kn
1199.00 €
1391.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Victor steam engine vertical boiler cpl. KRICK steam engines

With the steam engines Alex and Victor we present you a completely new developed series of oscillating steam engines, into which over 20 years of experience in model ship steam engines could flow. The oscillating steam engines in particular have proven their worth for use in ship models. They are characterised by very simple design, operation at low boiler pressure and very low susceptibility to faults. In order to keep the quality standard on a really high level and to give the beginner in the world of steam engines the right product right from the start, these machines are completely assembled and painted. They have been steam tested prior to delivery to ensure performance and durability.

STEAM ENGINE VICTOR

The Victor is the large boiler variant of this steam engine series, which can offer the machine a whole lot more performance. The modern ceramic burner and the boiler construction technology with 8 flue pipes makes this possible. This unit can propel ships up to approx. 15 kg without problems. For our steam barges Victoria |20261| and Borkum |20291| it is the ideal application.

Necessary accessories

Article-No.
223313| Gas tank
60105| Gas cartridge propane/butane
223316| Gas filling adapter
60100| Steam Engine Oil

Alternative for smaller ships
Article-No.
22300| Steam Engine ALEX

Technical Specifications
drilling 10 mm
Stroke 14 mm
Length of base plate 225 mm
Total width 95 mm
Boiler-Ø 87 mm
Boiler height 150 mm
total height 265 mm
Weight 1940 g
Shaft-Ø 4 mm
Shaft height 12mm

KRICK_ Victor Steam Machine Horizontal Boiler Item no.: 22303

Including VAT
For EU Market
9678.00 Kn
1299.00 €
1507.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

With the steam engines Alex and Victor we present you a completely new developed series of oscillating steam engines, into which over 20 years of experience in model ship steam engines could flow. The oscillating steam engines in particular have proven their worth for use in ship models. They are characterised by very simple design, operation at low boiler pressure and very low susceptibility to faults. In order to keep the quality standard on a really high level and to give the beginner in the world of steam engines the right product right from the start, these machines are completely assembled and painted. They have been steam tested prior to delivery to ensure performance and durability.

STEAM ENGINE VICTOR
The Victor is the large boiler variant of this steam engine series, which can offer the machine a whole lot more performance. The modern ceramic burner and the boiler construction technology with 8 flue pipes makes this possible. This unit can propel ships up to approx. 15 kg without problems. For our steam barges Victoria |20261| and Borkum |20291| it is the ideal application.

Necessary accessories

Article-No.
223313| Gas tank
60105| Gas cartridge propane/butane
223316| Gas filling adapter
60100| Steam Engine Oil

Alternative for smaller ships
Article-No.
22300| Steam Engine ALEX

Technical Specifications
drilling 10 mm
Stroke 14 mm
Base plate length 260 mm
Total width 102 mm
Boiler- 87 mm
Boiler height 125 mm
total height 210 mm
Weight 1940 g
Shaft diameter 4 mm
Shaft height 12mm

KRICK_ Victor Maxi Twin Steam Engine Horizontal Boiler Item no.: 22310

Including VAT
For EU Market
9999.99 Kn
1980.00 €
2297.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Victor Maxi Twin Steamm. horizontal boiler cpl.

Steam Engine Victor Maxi Twin with horizontal boiler and exhaust steam condenser The steam engine Victor Maxi Twin is the ideal version for ships with two-screw propulsion. With this system, two machines are supplied with steam by a boiler, but they are controlled completely independently, which makes very interesting and true-to-original driving manoeuvres possible. It is available as a horizontal boiler variant and easily powers ship models weighing up to 20 kg.

The machines and boiler plants are completely assembled and painted, which helps to deliver the plants carefully checked and adjusted. The scope of supply includes the machine with adjustable oiler and reversing valve for forward/reverse and speed, the boiler with safety valve, water level indicator, manometer and steam shut-off valve, the chimney with exhaust pipe, the gas burner with line and the exhaust steam condenser as well as the cladding strips for the boiler cladding.

Necessary accessories:
Article no.
22314 Gas tank
60105 Gas cartridge propane/butane
22316 Gas filling adapter

Useful addition
Article no.
60100 Steam engine oil 50 ml
Normal machinery or bicycle oil is unsuitable for steam engines due to heat development.
Therefore, only use superheated steam oil for steam engines.

Technical data Victor Maxi Twin
Length of boiler base plate 275 mm
Total width of boiler 190 - 250 mm
Boiler - 105 mm
Boiler height 145 mm
Overall height 270 mm
Weight 3800 g
Shaft- 4 mm
Shaft height 12 mm
Shaft distance 50 - 110 mm

 
 
Credit and Debit Cards:
 
 

 

 

 


 
PayPal Account:
PayPal Account:
marisstellamarisstella@gmail.com