English Hrvatski Italian
We deliver worldwide !
tel: +385 (0)21/544-412 | E-mail

RADIO CONTROLLED SHIP MODELS

 

KRICK_ Century 750 RTR Sail8ing Boat Item no.: 26101

Including VAT
For EU Market
1475.00 Kn
198.00 €
229.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Century 750 RTR Sailing Ship
"Ready to sail"

The Century is a very attractive ready-built sailing boat for beginners in model sailing. Despite a rather low price the equipment is rather regatta-suited. A carefully manufactured and painted GRP hull ensures durability and low weight. The ballast keel and rudder are professionally made of GRP. The sails are cut out of high-quality spinnaker sailcloth and finished with all reinforcements. A carbon fibre mast and a professional rigging give the right understanding for model sailing and real sailing.

The entire sail control technology with modern 8 kg sail winch (not a simple servo) was deliberately laid on deck for understanding and easy maintenance. This is much easier to adjust and less prone to failure than constructions below deck and therefore ideal for the beginner.

A 2.4 GHz remote control ensures safe operation and the detailed installation and operating instructions leave hardly any questions unanswered.

Additionally 12 AA/LR06 batteries or rechargeable batteries are required to power the transmitter and receiver.

Accessories:
Article-No.
667103 Mignon battery (please order 12 x) or
667222 Battery NiMH 1,2V/1300mAh AA Mignon (please order 12 x)
Possibly suitable charger

Technical data:
Length 750 mm
Width 180 mm
Total height 1400 mm
Mast height 1125 mm
Sail area 0,25 m2
Weight 1500 g
Transmitter 4-channel 2.4 GHz

Vedi altro

KRICK_ Prince 900 RTR Scale Sailing Yacht Item no.: 26103

Including VAT
For EU Market
2302.00 Kn
309.00 €
358.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Prince 900 RTR Scale Sailing Yacht "Ready to Sail"

The Prince 900 is a very detailed classic-modern sailing yacht. It combines sporty design with high attention to detail and at the same time very high-quality workmanship and technology. The hull is laminated in GRP technology and painted blue/white. The laser-engraved deck made of precious wood and the anti-slip deck reproduced and contrasting in colour on the foredeck offer a special optical attraction. The applied wooden deck is pre-painted. We recommend varnishing this with a clear varnish (e.g. "Lord Nelson") so that the wood is protected from moisture and does not swell.
Together with the plastic railing and many other fitting parts, which are only glued on, the result is a great model, which also looks great as a floor model at home.

The ballast keel is firmly screwed to the GRP keelboard and the entire keel can be screwed into the hull with only one nut. The rudder is also made of GRP.
Inside the fuselage, the fully assembled sail adjustment system with a sail winch offers state-of-the-art technology in a confined space that is completely invisible from the outside.
Rudder servo and linkage are also installed with the 4-channel 2.4 GHz remote control.

A carefully manufactured rig with coloured and reinforced spinnaker sails gives the model high-quality technology and the fast hull shape the best sailing characteristics.

The most important features:
GRP hull, white/blue lacquered and decorated
removable lacquered ballast keel
entire sail control invisibly below deck, completely mounted
2.4 GHz remote control for interference-free control commands
attractive detailing with wooden deck
practical access via two openings
high quality rig with spinnaker sails
easy to undo
construction time approx. 3-5 hours

Technical data:
Length 900 mm
Width 210 mm
Overall height 1800 mm
Mast height 1420 mm
Sail area 0,45 m²
Weight 2600 g
Remote control 2.4 GHz 4-channel

Required accessories
12x batteries Mignon AA Item No. 667103

Useful tools and accessories for assembly
Phillips screwdriver (cross-recess)
Pliers Article no. 455561
Socket wrench SW 5.5 mm + 7 mm Item No. 617440
Loctite 10 ml Article-No. 80474
Silicone Transparent 180 °C 80 ml Article no. 80505
Superglue Roket Rapid Cyano 20g Part No. 44052
Epoxyid Adhesive Speed Epoxy II Item No. 44003

Vedi altro

KRICK_ Prince 900 Hybrid RTR Scale Sailing Yacht Item no.: 26105

Including VAT
For EU Market
3122.00 Kn
419.00 €
486.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Prince 900 Hybrid RTR Scale Sailing Yacht with 2.4 GHz Remote Control and Electric Auxiliary Drive

The Prince 900 is a very detailed classic-modern sailing yacht. It combines sporty design with high attention to detail and at the same time very high-quality workmanship and technology.

The hull is laminated in GRP technology and painted blue/white. The laser-engraved deck made of precious wood and the anti-slip deck reproduced and contrasting in colour on the foredeck offer a special optical attraction. Together with the plastic railing and many other fitting parts, which are only glued on, the result is a great model, which also looks great as a floor model at home.

The ballast keel is firmly screwed to the GRP keelboard and the entire keel can be screwed into the hull with only one nut. The rudder is also made of GRP.
Inside the fuselage, the fully assembled sail adjustment system with a sail winch offers state-of-the-art technology in a confined space that is completely invisible from the outside.
Rudder servo and linkage are also installed with the 4-channel 2.4 GHz remote control.

A carefully manufactured rig with coloured and reinforced spinnaker sails gives the model high-quality technology and the fast hull shape the best sailing characteristics.

If required, the auxiliary motor is extended from the fuselage floor via a servo. In sailing mode, the complete drive in the hull has completely disappeared and does not disturb either the hydrodynamics or the appearance of the beautiful model.

Scope of delivery:
Blue/white painted GRP hull with partial real wood deck and fittings, aluminium mast with prefabricated sails, built-in RC system with rudder servo, digital sail winch, auxiliary drive, cruise control.

RC functions:
Sail adjustment by means of a winch
Rudder by means of steering servo
Extension of the auxiliary motor by means of built-in servo
Auxiliary motor speed control

The Prince 900 is also available as a pure sailboat without auxiliary propulsion under article number 26103.

Technical data:
Length 900 mm
Width 210 mm
Overall height 1800 mm
Mast height 1420 mm
Sail area 0,45 m²
Weight approx.3100 g

Required accessories
8x batteries Mignon AA for the transmitter
Driving battery 7.2 - 7.4 V from 1500 mAh for the power supply of receiver and drive
Suitable charger for drive battery


Useful tools and accessories for assembly
Phillips screwdriver (cross-recess)
Pliers Article no. 455561
Socket wrench SW 5.5 mm + 7 mm Item No. 617440
Loctite 10 ml Article-No. 80474
Silicone Transparent 180 °C 80 ml Article no. 80505
Superglue Roket Rapid Cyano 20g Part No. 44052
Epoxyid Adhesive Speed Epoxy II Item No. 44003

Vedi altro

KRICK_ Discovery II RTR Sailing Boat Item no.: 26110

Including VAT
For EU Market
1855.00 Kn
249.00 €
289.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

The Discovery II is the ideal way to get started with model sailing. This compact model is already fully equipped for model sailing and has an electric drive on board for emergencies or lulls. The fear of not getting your sail model back is a thing of the past. Electric drive and sail mechanics are optimally accommodated in the stable GRP hull and the large opening of the hull allows perfect working and maintenance conditions with two hands.

The most important features:
high-quality GRP fuselage
model ready built, painted and decorated
complete with 2.4 GHz remote control rudder and sail servo
equipped with electric motor and speed controller
high-quality finished sails made of spinaker cloth
Mast and rigging already prepared for final assembly
detailed assembly and sailing instructions
Model ready to sail in 2 to 3 hours
only 8 AA batteries for transmitter and drive battery with charger are still needed

Functions:
oars
sailing position
Additional electric drive
Decor already applied

Technical data:
Length 620 mm
Width 185 mm
Height 1130 mm
Total weight 1600 g
Mast height 820 mm
sail area 1800 qcm

Useful tools and accessories for assembly
Phillips screwdriver (cross-recess)
Pliers
Socket wrench SW 5.5 mm
Loctite 10 ml Article-No. 80474
Silicone Transparent 180 °C 80 ml Article no. 80505
Superglue Roket Rapid Cyano 20g Part No. 44052

Required accessories for operation
Item No.
667103 Mignon Battery AA R6 for the transmitter8x
646090 LiPo battery 7.4V 1500 mAh for motor and receiver
Suitable charger

Vedi altro

KRICK_ Navigator 870 RTS Sailing Boat Item no.: 26120

Including VAT
For EU Market
2153.00 Kn
289.00 €
335.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Navigator 870 RTS "READY TO SAIL"

This model is a nice and very fast replica of a modern ocean racer. The great design on the painted GRP hull and the finished sails, the modern double rudder system and the many details on deck make this model a real gem that also sails really well. The remote control with rudder servo and sail winch are already fully assembled.

Features:
replica of a modern ocean-going sailing yacht
double rudder for increased rudder effect in inclined position
RTS sailboat with a construction time of approx. 3 hours
2.4 GHz remote control
with rudder servo, digital sailing winch
painted GRP fuselage

Technical Specifications:
Length 870 mm
Height 1830 mm
Width 200 mm
Sail area 0,45 m²

Vedi altro

KRICK_ Hawaii 100 RTS Item no.: 26115

Including VAT
For EU Market
2228.00 Kn
299.00 €
347.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

Hawaii 100 RTS "READY TO SAIL"
The Hawaii is a very attractive sailing boat almost ready built for the 1M regatta class, which nevertheless also offers a true to original appearance of an original suit for the recreational model sailor. For the beginner in model sailing this model is very well suited, even if the size is not so handy.

Features:
replica of a modern ocean-going sailing yacht
Sail control on deck for particularly easy and trouble-free handling
RTS sailboat with a construction time of approx. 3 hours
2.4 GHz remote control
with rudder servo, digital sailing winch
painted and decorated GRP fuselage


Technical specifications
Length 1000 mm
Width 200 mm
Height 2150 mm
Sail area 0,52 m²
Weight 2600 g

Vedi altro

KRICK_ Compass RG65 Sailing Boat RTS Item no.: 26135

Including VAT
For EU Market
1781.00 Kn
239.00 €
277.00 US$
- Bank transfer, credit and debit cards welcome
- PayPal +5% additional charge

NEU Compass RG65 sailboat RTS "READY TO SAIL" Verson 2018

The most important innovations of the sailboat Compass RG65 version 2018

Extended sword with higher rigidity
Inovative adjustment of the mast angle
Improved bowing of the mainsail in and out of the hull
Reinforced heavy box with integrated mast bracket
Improved connection of the 2-piece CFK mast
Seal the rudder linkage with a rubber bellows
Now two openings in the fuselage for better accessibility of the built-in components
RC cover with O-ring for better sealing
More details and new pictures follow.

This sailboat is a consequent regatta construction for the worldwide growing RG65 sailing class. The extremely slim cut hull offers the least resistance and the deep keel ballast has the best characteristics close to the wind. The foredeck has also been deliberately designed for high buoyancy and the best cut through higher waves. The foredeck has been deliberately designed with a pointed shape so that the hull does not "shovel" and brakes when immersed in a shaft, but can run off again as quickly as possible.

The model comes with a high-quality rig for the beginner. In the RTS version, the Compass RG65 is supplied complete with fully assembled remote control and offers fast sailing fun.

Every ambitious regatta sailor can retrofit the upgrade options step by step. Also we as a supplier want to develop further with this product and offer better and further tuning possibilities for it. The foundation in the form of a slender and light hull has been laid.

Contents of delivery
GRP hull with keel and ballast and mounted fittings
waterproof spacious cover in the cockpit
complete rig with GRP mast and booms
good adjustment possibilities on the main boom for fine adjustment of the sail
pre-cut and reinforced sails
shrouds and stage already pre-assembled
compact Windfore 502 winch and servo for rudder adjustment mounted
Detailed installation and operating instructions
4-channel remote control in the 2.4 GHz band

Technical Specifications
Length 650 mm
Width 108 mm
Overall height 1428 mm
Mast height 912 mm
Weight 1350 g

Power supply for transmitter and receiver are not included. 12 AA (mignon) size batteries are required.

Alternatively, the sailboat Compass is also available without transmitter and receiver under article no. 26136. In this version any stick remote control system with at least 2 channels can be installed. It makes sense to place the sail adjustment on a non-neutralising lever of the remote control.

Vedi altro
 
 
Credit and Debit Cards:
 
 

 

 

 


 
PayPal Account:
PayPal Account:
marisstellamarisstella@gmail.com