English Hrvatski Italian
We deliver worldwide !
tel: +385 (0)21/544-412 | E-mail

MARIS STELLA Ship Model Kits

 
Marisstella

… applies to all brands of kits and products we sell.

Including VAT
For EU Market
Upgraded project
Retro project
0.00 Kn
0.00 Kn
0.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
0.00 Kn
0.00 Kn
0.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Marisstella

HMS Ontario 81cm 1:48

Including VAT
For EU Market
Upgraded project
Retro project
3855.00 Kn
0.00 Kn
514.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
3159.00 Kn
0.00 Kn
421.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

A relatively small deep water draught and heavily armed snow, built like her much bigger seagoing cousins. Stern and quarters unusually handsome and elegant, decorations kept to a minimum as per colonial fashion of the day. She represents the vessel as she was originally drawn up by the British Admiralty, built at Carleton Island in 1779 and as she rests, unusually well-preserved, at the bottom of Lake Ontario. She has been pieced together from the original Admiralty drawings and informati...

Marisstella

BARQUE 'STEFANO' 112,1cm 1:63

Including VAT
For EU Market
Upgraded project
Retro project
5475.00 Kn
0.00 Kn
730.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
4487.00 Kn
0.00 Kn
598.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

The bark, barque or barc, is a type of ship with three or more masts with the foremasts equipped with square sails and the sternmast with spanker and peak sail. The word barque comes from the Latin barca which derives from Spanish or Italian. The Latin word barca may come from Greek "baris" or Celtic "barc", a term used for an Egyptian boat. Rig of a three-masted barque: By the end of the 18th century, the term barque (sometimes spelled bark) began to refer to any sailing vessel ...

Marisstella

ARGOSY - Ragusian Galleon 71,7cm 1:59

Including VAT
For EU Market
Upgraded project
Retro project
3247.00 Kn
2443.00 Kn
433.00 €
325.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
2661.00 Kn
2004.00 Kn
354.00 €
266.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

The Galleon is a sailing vessel for war and commerce of the XVI and XVII centuries, a type of transitory ship between the galeasa and the ship of the line. It was born from the need to make long journeys, when the galeasa, as transitory type from a rowing ship to a sail one, was no longer suitable to travel to distant overseas areas. Towards the middle of the 15th century the galleon is the best vessel after the carrak, with high sides, a little bit longer and faster than the nave....

Marisstella

Ragusian Carrack 77,5cm 1:59

Including VAT
For EU Market
Upgraded project
Retro project
3420.00 Kn
2586.00 Kn
456.00 €
344.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
2803.00 Kn
2120.00 Kn
374.00 €
282.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Carrack probably took her name from Arabic word karraka, which means light boat (Carrack, carraque, kraeck, Carraca). This is a big sailing ship in use from the 14th to the 17th century, designed for transporting goods. Carrack appeared in Venice in the early 14th century, but almost at the same time began to be built in the city of Dubrovnik (Ragusa) as the largest cargo ships in the Adriatic. In the 15th century Carrack had spread from the Adriatic, the Mediterranean Sea and...

Marisstella

RAGUSIAN COG 16th c. 65cm 1:48

Including VAT
For EU Market
Upgraded project
Retro project
3052.00 Kn
2707.00 Kn
407.00 €
360.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
2501.00 Kn
2219.00 Kn
332.00 €
295.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Cog is the war and merchant ship in the North Sea, the Mediterranean and the Adriatic Sea, with a big lead and two small reserve masts, whose main characteristic is high and tight bow tower forward with a almost horizontal triangular deck. One feature of this ship are the side openings for boarding horses and cattle and she is designed primarly for transporting army. She is mentioned for the first time in the 11th century, and across the Mediterranean in the 13th century. These ...

Marisstella

PELIG 87,9cm 1:32

Including VAT
For EU Market
Upgraded project
Retro project
2895.00 Kn
2353.00 Kn
386.00 €
313.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
2372.00 Kn
1929.00 Kn
316.00 €
257.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Pelig is a coastal cargo sailing ship with two masts, whose hull is similar to the trabaccalo, with round sides and round bottom with keel. She is long from 11 up to 27, up to 6 meters large and up 2,5 meters high. Her capacity is from 20 up to 100 tons. In a later stage of development she has a tapered bow and a narrower stern as in the lugger. She differs from the trabaccalo, as all sailers distinguish themselves, for the sails. Specifically, on the mast of the stern is developp...

Marisstella

TRABACCOLO 80,9cm 1:32

Including VAT
For EU Market
Upgraded project
Retro project
3360.00 Kn
2527.00 Kn
448.00 €
336.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
2754.00 Kn
2071.00 Kn
367.00 €
275.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Trabakul, trabakuo and trabakula are different names for the same vessel of the Italian and Croatian people. She is a typical two-masted sailing boat intended for sailing on the Adriatic coast, rarely seen outside the Straits of Otranto. The name itself Pellegrini comes from the Arabic word tabaquah, roof. She's up to 30m long, up to 6m wide and her draught is up to 2m. She can take from 60 to 200 tons. Undoubtedly a descendant of navis rotunda, round antique boats, designe...

Marisstella

BRAZZERA 72cm 1:32

Including VAT
For EU Market
Upgraded project
Retro project
2992.00 Kn
2128.00 Kn
399.00 €
283.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
2452.00 Kn
1744.00 Kn
327.00 €
232.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Bracera is a Croatian sailing cargo ship, whose hull is between 15 and 17 meters long, which appears already in the sixteenth century as a logical result of the evolution of the ship round, navis rotunda, an old cargo ship. Even in the fifteenth century, some types of ships differed from the other ships of Brac in the Adriatic and brought the name of type and markings or Bracana. In the sixteenth century there was next to the Adriatic bragagnu from Chioggia, the braganja Brac. At fir...

Marisstella

ŠTILAC 61cm 1:32

Including VAT
For EU Market
Upgraded project
Retro project
2242.00 Kn
1609.00 Kn
299.00 €
214.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
1837.00 Kn
1319.00 Kn
245.00 €
175.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Stilac is a ship of recent times, namely of the 19th century, is welcomed by a large number of boat builders. She is built along the east coast of the Adriatic Sea to transport a wide variety of products linking the islands to the mainland. To explain and present this simple design, between the coastal people there is “a deep rooted” expression for the construction of the ship - well done. The stern and sails were taken from Bracera, the bow by the logger. This ship can be f...

Marisstella

GAJETA 48,0cm 1:14

Including VAT
For EU Market
Upgraded project
Retro project
1582.00 Kn
1286.00 Kn
211.00 €
171.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
1297.00 Kn
1054.00 Kn
173.00 €
140.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Gajeta is a wooden boat which was previously used for fishing, nowadays is almost used to transport cargo. On the croatian coast is widely used in the areas of Zadar, Sibenik and Split and navigates all along the east coast of the Adriatic Sea, from Kotor to Venice. Her lenght is up to 12 meters and the width up to 4 meters. Already in the XVI century looms her distinctive shape, while the name of Gajeta appears only in the XVII century. Distinguishing characteristics of ...

Marisstella

PASARA 44,3cm 1:14

Including VAT
For EU Market
Upgraded project
Retro project
877.00 Kn
0.00 Kn
117.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
719.00 Kn
0.00 Kn
96.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

lightweight wooden boat, suitable for sport fishing and sailing. She is used all along the Croatian coast. Depending on their length differ large and small dinghies. Small dinghies are up to 4.8 m long, open along her entire length, large dinghies, 5-6m long, have one third of the front deck covered. Sometimes they have hatch with a lid to descend in the bow area. Placed among the medium-sized boats. Compared to other boats differs for the straight stern cut, ending with t...

Marisstella

FALKUSA 70,4cm 1:20

Including VAT
For EU Market
Upgraded project
Retro project
1567.00 Kn
1294.00 Kn
209.00 €
172.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
1284.00 Kn
1060.00 Kn
171.00 €
141.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Cargo and fishing boats of the island of Vis. Gajeta falkuša is designed according to the needs of fishermen from Komiža who sailed for centuries to 42 miles away from Palagruža, an area rich in fish and where they ruled. Loaded with salt for the salting of fish, fishing gear and other objects, they sailed by day using the mistral, the north-west wind and returned in the evening and night, sailing with the south wind. This method of navigation that required two types of vessels, cargo...

Marisstella

TRAJTA - fishing and cargo boat from Korčula 63,8cm 1:20

Including VAT
For EU Market
Upgraded project
Retro project
1485.00 Kn
0.00 Kn
198.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
1217.00 Kn
0.00 Kn
163.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Cargo is a wooden boat firmly rooted among the fishermen of the adriatic coast, widespread throughout the Mediterranean. On the east coast of the Adriatic Sea she' s known also under the names legut and levut, and then as leuto and liuto in Italy, laudus, laud Katalan in Spain, leudo Ligure on the Ligurian Sea, and even in the XIV century the boat lignetum was built in Dubrovnik. The name come from the italian word legno, which means wood. On the island of Korcula she' s called t...

Marisstella

LIBURNIAN MONOREME 56,9cm 1:63

Including VAT
For EU Market
Upgraded project
Retro project
1162.00 Kn
0.00 Kn
155.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
952.00 Kn
0.00 Kn
127.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

llyrian warship Liburna, a rowing warship used from 8th to 1st century before Christ. She takes her name from the Liburnians, who first built this ship, which is characterized by versatility and high speed. They distinguished themselves for their good maneuverability in the battle of Actium (31BC), so the Romans took them over as the best ship of war. Their name soon became well known throughout Europe representing for several centuries a synonymous with warship. So later bireme and ...

Marisstella

SAINT JEROME 16th c. 68cm 1:75

Including VAT
For EU Market
Upgraded project
Retro project
2152.00 Kn
1789.00 Kn
287.00 €
238.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
1764.00 Kn
1467.00 Kn
235.00 €
196.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

St. Jerome is galley of Hvar of the sixteenth century, that participated in the Battle of Lepanto under the Venetian flag. She was about fifty meters long. The battery was made up of five guns placed on the bow. This is a model on which the keel and all the elements of the sides and deck are made of solid walnut wood. The sails are embroidered on the cloth. Structural elements are laser cut.

Marisstella

RAGUSIAN GALLEY 18th c. 78cm 1:75

Including VAT
For EU Market
Upgraded project
Retro project
1695.00 Kn
0.00 Kn
226.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
1389.00 Kn
0.00 Kn
185.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Dubrovnik galley was an integral part of the Dubrovnik's war fleet, which in the seventeenth and eighteenth century had only a few small warships, at most ten, formed solely because of frequent harassment and looting by pirates and cargo ships at that time. Ships stationed in Dubrovnik and Mali Ston. Other Croatian coastal centers had this type of ship along the eastern Adriatic coast: Kotor, Omis, Senj, and others. Dubrovnik galley was driven by the wind and the rowers, Galiot, who...

Marisstella

NOVILARA - Picenian and Liburnian ship 6oo BC 69cm 1:35

Including VAT
For EU Market
Upgraded project
Retro project
1323.00 Kn
0.00 Kn
176.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
1084.00 Kn
0.00 Kn
144.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

These Picenian ships used for commercial and war purposes were built between the present towns of Zadar and Rijeka and in Novilara on the other side of the Adriatic Sea. Their builders have sailed on them throughout the Adriatic Sea already 600 years before Christ. Historians have traced this type of ship according to the view of color engraved on the tombstone Novilara in Pesaro. It shows the battle Novilara and Liburna, where identical boats were used.This is a model whose rostrum w...

Marisstella

SANTA MARIA 65cm 1:60 Beginner Set: Level 3

Including VAT
For EU Market
Upgraded project
Retro project
2970.00 Kn
0.00 Kn
395.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
2434.00 Kn
0.00 Kn
323.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

It is not necessary to say many words about the famous Christopher Columbus’s boat Santa Maria. The model is described in great detail. The sails are embroidered on the cloth. Structural elements are laser cut.. Beginner Set: Level 3

Marisstella

BATELINA 34cm 1:10

Including VAT
For EU Market
Upgraded project
Retro project
654.00 Kn
482.00 Kn
87.00 €
64.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
536.00 Kn
395.00 Kn
72.00 €
52.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

A continuing of the Monotip Optimist model ship school. You will master simple planking. After constructing this model, you are capable for building one of the following models. Structural elements are laser cut. See more about the project and technical solutions in the news section: Beginner set: Level 1 By MarisStella Model Ship Kits

Marisstella

OPTIMIST DINGHY 39cm 1:6

Including VAT
For EU Market
Upgraded project
Retro project
706.00 Kn
467.00 Kn
94.00 €
62.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
579.00 Kn
382.00 Kn
76.00 €
51.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

An ideal continuing of a model ship school. You will upgrade everything you have learned during the construction of Neretvanska Trupa. You will master the construction of a simple sail and placement of a rudder. Structural elements are laser cut. See more about the project and technical solutions in the news section: Beginner set: Level 1 By MarisStella Model Ship Kits

Marisstella

NERETVANSKA TRUPA (boat from the river Neretva) 50cm 1:8

Including VAT
For EU Market
Upgraded project
Retro project
533.00 Kn
299.00 Kn
71.00 €
40.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
437.00 Kn
246.00 Kn
58.00 €
33.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

An ideal beginning for everyone who wants to become a serious model ship constructor. On this model you will master the construction of frames and placement of a single part sheating. Structural elements are laser cut. See more about the project and technical solutions in the news section: Beginner set: Level 1 By MarisStella Model Ship Kits

Marisstella

Beginner set: Level 1

Including VAT
For EU Market
Upgraded project
Retro project
1180.00 Kn
1015.00 Kn
157.00 €
135.00 €
183.00 US$
156.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
967.00 Kn
832.00 Kn
127.00 €
110.00 €
147.00 US$
127.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

The MarisStella program for beginners... This set is composed exclusively for the persons who want to become ship modellers and enter to this wonderful world of modelling. It is designed exclusively for the future modellers who have absolutely no experience. Building these models, the future modeller will acquire all the necessary knowledge and experience for future, more serious work. This program for beginners will train you to work on frames-bulkheads from the very beginning. The Begin...

Marisstella

Brazzera 54,8cm 1:41 Old Seller

Including VAT
For EU Market
Upgraded project
Retro project
698.00 Kn
0.00 Kn
93.70 €
0.00 €
108.70 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
582.00 Kn
0.00 Kn
78.00 €
0.00 €
91.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Bracera is a Croatian sailing cargo ship, whose hull is between 15 and 17 meters long, which appears already in the sixteenth century as a logical result of the evolution of the ship round, navis rotunda, an old cargo ship. This is an easy-to-make model and is suitable for beginner work or for relaxation. The basic elements are laser-cut. The instruction is written in Croatian only. This is exceptional for this model. Other models have instructions written in both English and Italian.

Marisstella

Nava of Ragusa 16th c. 63,1cm 1:63 Old Seller

Including VAT
For EU Market
Upgraded project
Retro project
1389.00 Kn
0.00 Kn
187.00 €
0.00 €
217.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
1157.00 Kn
0.00 Kn
156.00 €
0.00 €
181.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Until the sixteenth century, nava was a generic name for all great sailing ships in the basin of the Mediterranean Sea. Famous sailors and experienced merchants from Ragusa, Dubrovnik, had such ships in their fleet. The basic elements are laser-cut. The instruction is written in Croatian only. This is exceptional for this model. Other models have instructions written in both English and Italian.

Marisstella

Small Galley of Ragusa 17th c. 57cm 1:95 Old Seller

Including VAT
For EU Market
Upgraded project
Retro project
795.00 Kn
0.00 Kn
107.00 €
0.00 €
124.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
662.00 Kn
0.00 Kn
89.00 €
0.00 €
103.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Dubrovnik galley was an integral part of the Dubrovnik's war fleet, which in the seventeenth and eighteenth century had only a few small warships, at most ten, formed solely because of frequent harassment and looting by pirates and cargo ships at that time. The basic elements are laser-cut. The instruction is written in Croatian only. This is exceptional for this model. Other models have instructions written in both English and Italian.

Marisstella

Drawing 'Štilac Zornica' 1:25

Including VAT
For EU Market
Upgraded project
Retro project
290.00 Kn
0.00 Kn
39.00 €
0.00 €
45.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
241.00 Kn
0.00 Kn
33.00 €
0.00 €
38.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Drawing 'Štilac Zornica' 1:25 built in 1938. Reconstructed several times. The drawing contains three sheets of 830mm x 1000mm, color, designed for experienced modelers.

Marisstella

Ontario 3D printed mold for Stern and (Quarter-Galleries) Badges 1:48

Including VAT
For EU Market
Upgraded project
Retro project
937.00 Kn
0.00 Kn
125.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
768.00 Kn
0.00 Kn
103.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

The parts will have to be separated by removing them from their supports. Trough a new technique developed by MarisStella the 3D printed parts can be planked with wood strips so the parts look and feel like they are made of wood. Follow the planking layout on the drawing. Ontario’s lettering is photo-etched part supplied with the kit. The modeler will have to make the window frames from strip remains and to carve tiny grooves for them, so they lay flush with the planking. The window frames ...

Marisstella

Ontario 3D printed Bow decoration 1:48

Including VAT
For EU Market
Upgraded project
Retro project
322.00 Kn
0.00 Kn
43.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
264.00 Kn
0.00 Kn
35.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

The modeler will have to separate the 3D parts by removing them from their supports. They should be painted first as shown in the drawing and then be added to the model. These 3D parts are a photopolymer resin printed with SLA 3D technology (stereolithography).

Marisstella

Ontario pre-sewn sails

Including VAT
For EU Market
Upgraded project
Retro project
217.00 Kn
0.00 Kn
29.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
178.00 Kn
0.00 Kn
24.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Sails are pre-sewn fabric. The modeler has to cut the sails from the fabric. Make tabling on the leeches and linings and glue them onto the sails using any readily available fabric glue. Keep in mind that the fore and aft sides of the sails will not be identical. Complete the sails by adding a bolt rope and reef points. To make the process of making the sails easier, clear instructions and a completed sample sail have been included.

Marisstella

Ontario 1:48 249 blocks - Substitute for the best made model

Including VAT
For EU Market
Upgraded project
Retro project
947.00 Kn
0.00 Kn
127.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
760.00 Kn
0.00 Kn
105.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

For a superbly made model, we have prepared special blocks made of pear wood. Substitute kit contains: 3mm Pearwood Single Sheave 90pcs 5mm Pearwood Single Sheave 65pcs 7mm Pearwood Single Sheave 10pcs 3mm Pearwood Double Sheave 66pcs 5mm Pearwood Double Sheave 6pcs 7mm Pearwood Double Sheave 10pcs 7mm Pearwood Triple Sheave 2pcs

Marisstella

Barque 'Stefano' Photo etched copper plates 1:63 19th c.

Including VAT
For EU Market
Upgraded project
Retro project
1867.00 Kn
0.00 Kn
249.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
1530.00 Kn
0.00 Kn
204.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

Barque 'Stefano': Photo etched copper plates placed onto 5 sheets…. 20cm x 30cm (7.87” x 11.81”) 1:63 19th c.

Marisstella

TUG 01 ISE 27,5cm I Start Early

Including VAT
For EU Market
Upgraded project
Retro project
384.00 Kn
0.00 Kn
51.50 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
0.00 Kn
0.00 Kn
0.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

"I Start Early" is a program for the youngest beginner ship modellers compiled at the School of Ship Modeling ZTKDU in Dubrovnik. The program includes work with students from 7 years of age and up. TUG is a model on which the youngest participants meet laser-cut elements for the first time. They need to clean the darkened edges from them, assemble the elements and glue them. Coloring this model through practice introduces future modelers to the secrets of the process. The printed planking is ...

Marisstella

BATEL 02 ISE 33,4cm 1:12 I Start Early

Including VAT
For EU Market
Upgraded project
Retro project
575.00 Kn
0.00 Kn
76.50 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
0.00 Kn
0.00 Kn
0.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

"I Start Early" is a program for the youngest beginner ship modellers compiled at the School of Ship Modeling ZTKDU in Dubrovnik. The program includes work with students from 7 years of age and up. BATEL is a model on which the youngest advanced students aged 12 and up meet the process of making the rudder and the bending of the strips for the first time. They need to clean the darkened edges from laser cut elements , sand and assemble the elements and glue them. Coloring the model through p...

Marisstella

Literature

Including VAT
For EU Market
Upgraded project
Retro project
0.00 Kn
0.00 Kn
0.00 €
0.00 €
0.00 US$
0.00 US$
Tax Free
For NON EU Market
Upgraded project
Retro project
0.00 Kn
0.00 Kn
0.00 €
0.00 €
0.00 US$
0.00 US$
Bank transfer 5% discount
PayPal +5% additional charge

 
 
Credit and Debit Cards:
 
 

 

 

 


 
PayPal Account:
PayPal Account:
marisstellamarisstella@gmail.com